- Mar 05, 2022
-
-
Geliang Tang authored
This patch added a new function chk_fclose_nr() to check the numbers of the MP_FASTCLOSE sending and receiving mibs. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving. Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received. Signed-off-by:
-
Geliang Tang authored
The number of self tests in mptcp_join.sh will soon be more than 100, the output alignment is no longer OK. This patch adjusted it. Signed-off-by:
-
Meng Tang authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.com Signed-off-by:
-
Jonathan Lemon authored
On the debug summary page, show the /dev/ttyS<port> mapping. Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220304054615.1737-1-jonathan.lemon@gmail.com Signed-off-by:
-
Horatiu Vultur authored
The variables 'res' inside the functions sparx5_ptp_get_1ppm and sparx5_ptp_get_nominal_value was not initialized. So in case of the default case of the switch after, it would return an uninitialized variable. This makes also the clang builds to failed. Fixes: 0933bd04 ("net: sparx5: Add support for ptp clocks") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add new PID/VID (0x13d3/0x3567) for MT7921 - Add new PID/VID (0x2550/0x8761) for Realtek 8761BU - Add support for LG LGSBWAC02 (MT7663BUN) - Add support for BCM43430A0 and BCM43430A1 - Add support for Intel Madison Peak (MsP2) * tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (21 commits) Bluetooth: btusb: Add another Realtek 8761BU Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1 Bluetooth: use memset avoid memory leaks Bluetooth: btmtksdio: Fix kernel oops when sdio suspend. Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 Bluetooth: move adv_instance_cnt read within the device lock Bluetooth: hci_event: Add missing locking on hdev in hci_le_ext_adv_term_evt Bluetooth: btusb: Make use of of BIT macro to declare flags Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg} Bluetooth: mediatek: fix the conflict between mtk and msft vendor event Bluetooth: mt7921s: support bluetooth reset mechanism Bluetooth: make array bt_uuid_any static const Bluetooth: 6lowpan: No need to clear memory twice Bluetooth: btusb: Improve stability for QCA devices Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN) Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) device Bluetooth: Improve skb handling in mgmt_device_connected() Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected() Bluetooth: mgmt: Remove unneeded variable Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync() ... ==================== Link: https://lore.kernel.org/r/20220304193919.649815-1-luiz.dentz@gmail.com Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-03-04 We've added 32 non-merge commits during the last 14 day(s) which contain a total of 59 files changed, 1038 insertions(+), 473 deletions(-). The main changes are: 1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id, as consecutive stack frames are likely to be in the same VMA and therefore have the same build id, from Hao Luo. 2) Several improvements to arm64 BPF JIT, that is, support for JITing the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed programs, from Hou Tao. 3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu() barrier once upon return to user space, from Eric Dumazet. 4) For kernel build parse DWARF and generate BTF through pahole with enabled multithreading, from Kui-Feng Lee. 5) BPF verifier usability improvements by making log info more concise and replacing inv with scalar type name, from Mykola Lysenko. 6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu. 7) Add a new Kconfig to allow for loading kernel modules with non-matching BTF type info; their BTF info is then removed on load, from Connor O'Brien. 8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray() in order to fix compilation errors for older glibc, from Mauricio Vásquez. 9) Fix libbpf to error on conflicting name in BTF when type declaration appears before the definition, from Xu Kuohai. 10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF program fds prevent init process from setting up fd 0-2, from Yucong Sun. 11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined by libbpf, from Stijn Tintel. 12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be non-zero, from Yuntao Wang. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits) bpf: Small BPF verifier log improvements libbpf: Add a check to ensure that page_cnt is non-zero bpf, x86: Set header->size properly before freeing it x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86 bpf, test_run: Fix overflow in XDP frags bpf_test_finish selftests/bpf: Update btf_dump case for conflicting names libbpf: Skip forward declaration when counting duplicated type names bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig bpf, docs: Add a missing colon in verifier.rst bpf: Cache the last valid build_id libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning bpf, selftests: Use raw_tp program for atomic test bpf, arm64: Support more atomic operations bpftool: Remove redundant slashes bpf: Add config to allow loading modules with BTF mismatches bpf, arm64: Feed byte-offset into bpf line info bpf, arm64: Call build_prologue() first in first JIT pass bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel. bpftool: Bpf skeletons assert type sizes bpf: Cleanup comments ... ==================== Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net Signed-off-by:
-
- Mar 04, 2022
-
-
Helmut Grohne authored
This device is sometimes wrapped with a label "EDUP". T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2550 ProdID=8761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Helmut Grohne <helmut@subdivi.de> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351 Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Luca Weiss authored
Add the compatible for BCM43430A0 bluetooth used in lg-lenok and BCM43430A1 used in asus-sparrow. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
-
Minghao Chi (CGEL ZTE) authored
Use memset to initialize structs to prevent memory leaks in l2cap_ecred_connect Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by:
-
Yake Yang authored
Do not kfree the skb when the skb failed to send with __hci_cmd_sync 2435.241210] Call trace: [ 2435.241224] kfree_skb+0x20/0x140 [ 2435.241240] btmtksdio_sdio_wakeup+0x8c/0xcc [ 2435.241360] hci_suspend_notifier+0x108/0x184 [ 2435.241377] notifier_call_chain_robust+0x58/0xd8 [ 2435.241390] blocking_notifier_call_chain_robust+0x54/0x84 [ 2435.241402] pm_notifier_call_chain_robust+0x2c/0x4c [ 2435.241414] suspend_prepare+0x40/0x238 [ 2435.241425] enter_state+0xec/0x3a8 [ 2435.241436] pm_suspend+0x60/0xcc [ 2435.241446] state_store+0xb8/0x114 [ 2435.241460] kobj_attr_store+0x18/0x2c [ 2435.241473] sysfs_kf_write+0x44/0x58 [ 2435.241486] kernfs_fop_write_iter+0xf4/0x190 [ 2435.241500] vfs_write+0x2b0/0x2e4 [ 2435.241511] ksys_write+0x80/0xec [ 2435.241523] __arm64_sys_write+0x24/0x30 [ 2435.241538] el0_svc_common+0xf0/0x1d8 [ 2435.241550] do_el0_svc_compat+0x28/0x54 [ 2435.241564] el0_svc_compat+0x10/0x1c [ 2435.241574] el0_sync_compat_handler+0xa8/0xcc [ 2435.241586] el0_sync_compat+0x188/0x1c0 [ 2435.241606] Code: a9014ff4 910003fd b40002c0 aa0003f3 (b84d4c08) [ 2435.241619] ---[ end trace d496539b850baf14 ]--- Fixes: ce64b3e9 ("Bluetooth: mt7921s: Support wake on bluetooth") Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Yake Yang <yake.yang@mediatek.com> Signed-off-by:
-
Yake Yang authored
Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3567 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us Co-developed-by:
-
Niels Dossche authored
The field adv_instance_cnt is always accessed within a device lock, except in the function add_advertising. A concurrent remove of an advertisement with adding another one could result in the if check "if a new instance was actually added" to not trigger, resulting in not triggering the "advertising added event". Signed-off-by:
Niels Dossche <niels.dossche@ugent.be> Signed-off-by:
-
Niels Dossche authored
Both hci_find_adv_instance and hci_remove_adv_instance have a comment above their function definition saying that these two functions require the caller to hold the hdev->lock lock. However, hci_le_ext_adv_term_evt does not acquire that lock and neither does its caller hci_le_meta_evt (hci_le_meta_evt calls hci_le_ext_adv_term_evt via an indirect function call because of the lookup in hci_le_ev_table). The other event handlers all acquire and release the hdev->lock and they follow the rule that hci_find_adv_instance and hci_remove_adv_instance must be called while holding the hdev->lock lock. The solution is to make sure hci_le_ext_adv_term_evt also acquires and releases the hdev->lock lock. The check on ev->status which logs a warning and does an early return is not covered by the lock because other functions also access ev->status without holding the lock. Signed-off-by:
-
Luiz Augusto von Dentz authored
This makes use of BIT macro when declaring BTUSB flags which makes it understand how many bits are in use and many are left. Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This fixes attemting to print hdev->name directly which causes them to print an error: kernel: read_version:367: (efault): sock 000000006a3008f2 Signed-off-by:
-
Sean Wang authored
There is a conflict between MediaTek wmt event and msft vendor extension logic in the core layer since 145373cb ("Bluetooth: Add framework for Microsoft vendor extension") was introduced because we changed the type of mediatek wmt event to the type of msft vendor event in the driver. But the purpose we reported mediatek event to the core layer is for the diagnostic purpose with that we are able to see the full packet trace via monitoring socket with btmon. Thus, it is harmless we keep the original type of mediatek vendor event here to avoid breaking the msft extension function especially they can be supported by Mediatek chipset like MT7921 , MT7922 devices and future devices. Signed-off-by:
-
Chih-Ying Chiang authored
Implement .cmd_timeout to reset the MT7921s device via a dedicated GPIO pin when the firmware hang or the command has no response. Co-developed-by:
Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by:
Chih-Ying Chiang <chih-yin.chiang@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array bt_uuid_any on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
'peer_addr' is a structure embedded in 'struct lowpan_peer'. So there is no need to explicitly call memset(0) on it. It is already zeroed by kzalloc() when 'peer' is allocated. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Zijun Hu authored
WCN6855 2.1 will reset to apply firmware downloaded, so wait a moment for reset done then go ahead to improve stability. Signed-off-by:
Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by:
-
Piotr Dymacz authored
The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which can be found in several different LG TV models. This module is based on already supported MediaTek MT7663U series. Device from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=310c Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Piotr Dymacz <pepe2k@gmail.com> Signed-off-by:
-
Kiran K authored
$ lsusb Bus 003 Device 003: ID 8087:0035 Intel Corp. $ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0035 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Radoslaw Biernacki authored
This patch introduce eir_skb_put_data() that can be used to simplify operations on eir in goal of eliminating the necessity of intermediary buffers. eir_skb_put_data() is in pair to what eir_append_data() does with help of eir_len, but without awkwardness when passing return value to skb_put() (as it returns updated offset not size). Signed-off-by:
Radoslaw Biernacki <rad@semihalf.com> Signed-off-by:
-
Radoslaw Biernacki authored
This patch fixes skb allocation, as lack of space for ev might push skb tail beyond its end. Also introduce eir_precalc_len() that can be used instead of magic numbers for similar eir operations on skb. Fixes: cf1bce1d ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND") Fixes: e9674143 ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED") Signed-off-by:
Angela Czubak <acz@semihalf.com> Signed-off-by:
Marek Maslanka <mm@semihalf.com> Signed-off-by:
-
Minghao Chi authored
Return value from mgmt_cmd_complete() directly instead of taking this in another redundant variable. Reported-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
-
Tom Rix authored
clang static analysis reports this problem hci_sync.c:4428:2: warning: Undefined or garbage value returned to caller return err; ^~~~~~~~~~ If there are no connections this function is a noop but err is never set and a false error could be reported. Return 0 as other hci_* functions do. Fixes: 182ee45d ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Changcheng Deng authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members" for these cases. The older style of one-element or zero-length arrays should no longer be used. Reference: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Reported-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by:
-
Jiapeng Chong authored
Since the starting value in the for loop is greater than or equal to 1, the restriction is CAS_FLAG_REG_PLUS is in the file cassini.h is defined as 0x1 by macro, and the for loop and if condition is not satisfied, so the code here is redundant. Clean up the following smatch warning: drivers/net/ethernet/sun/cassini.c:3513 cas_start_dma() warn: we never enter this loop. drivers/net/ethernet/sun/cassini.c:1239 cas_init_rx_dma() warn: we never enter this loop. drivers/net/ethernet/sun/cassini.c:1247 cas_init_rx_dma() warn: we never enter this loop. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== Add AF_XDP zero-copy support for NFP Niklas Söderlund says: This series adds AF_XDP zero-copy support for the NFP driver. The series is based on previous work done by Jakub Kicinski. Patch 1/5 and 2/5 prepares the driver for AF_XDP support by refactoring functions that will act differently once AF_XDP is active or not making the driver easier to read and by preparing some functions to be reused outside the local file scope. Patch 3/5 and 4/5 prepares the driver for dealing the UMEM while finally patch 5/5 adds AF_XDP support. Based on work by Jakub Kicinski. ==================== Signed-off-by: -
Niklas Söderlund authored
This patch adds zero-copy Rx and Tx support for AF_XDP sockets. It do so by adding a separate NAPI poll function that is attached to a each channel when the XSK socket is attached with XDP_SETUP_XSK_POOL, and restored when the XSK socket is terminated, this is done per channel. Support for XDP_TX is implemented and the XDP buffer can safely be moved from the Rx to the Tx queue and correctly freed and returned to the XSK pool once it's transmitted. Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS will allocate a new buffer and copy the zero-copy frame prior passing it to the kernel stack. This patch is based on previous work by Jakub Kicinski. Signed-off-by:
Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Niklas Söderlund authored
In preparation for adding AF_XDP support add a configuration check to make sure the buffer size can not be set to a larger value then the XSK socket chunk size. Signed-off-by:
-
Niklas Söderlund authored
Each data path needs an array of xsk pools to track if an xsk socket is in use. Add this array and make sure it's handled correctly when the data path is duplicated. Signed-off-by:
-
Jakub Kicinski authored
There will be more NAPI register logic once AF_XDP support is added, wrap our already conditional napi add/del into helpers. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Niklas Söderlund authored
There are some common functionality that can be reused in the upcoming AF_XDP support. Expose those functions in the header. While at it mark some arguments of nfp_net_rx_csum() as const. Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== net: sparx5: Add PTP Hardware Clock support Add support for PTP Hardware Clock (PHC) for sparx5. ==================== Signed-off-by: -
Horatiu Vultur authored
Implement the function get_ts_info in ethtool_ops which is needed to get the HW capabilities for timestamping. Signed-off-by:
-
Horatiu Vultur authored
When doing 2-step timestamping the HW will generate an interrupt when it managed to timestamp a frame. It is the SW responsibility to read it from the FIFO. Signed-off-by:
-
Horatiu Vultur authored
Update both the extraction and injection to do timestamping of the frames. The extraction is always doing the timestamping while for injection is doing the timestamping only if it is configured. Signed-off-by:
-
