- May 15, 2020
-
-
Maxime Ripard authored
The H6 mixer is attached to an IOMMU, so let's allow that property to be set in the bindings. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/7941e0c02794e6336da75fcac950ecd43be7fd97.1589378833.git-series.maxime@cerno.tech
-
Imre Deak authored
This fixes the following use-after-free problem in case an MST down message times out, while waiting for the response for it: [ 449.022841] [drm:drm_dp_mst_wait_tx_reply.isra.26] timedout msg send 0000000080ba7fa2 2 0 [ 449.022898] ------------[ cut here ]------------ [ 449.022903] list_add corruption. prev->next should be next (ffff88847dae32c0), but was 6b6b6b6b6b6b6b6b. (prev=ffff88847db1c140). [ 449.022931] WARNING: CPU: 2 PID: 22 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 [ 449.022935] Modules linked in: asix usbnet mii snd_hda_codec_hdmi mei_hdcp i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep e1000e snd_hda_core ptp snd_pcm pps_core mei_me mei intel_lpss_pci prime_numbers [ 449.022966] CPU: 2 PID: 22 Comm: kworker/2:0 Not tainted 5.7.0-rc3-CI-Patchwork_17536+ #1 [ 449.022970] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A16.1912270059 12/27/2019 [ 449.022976] Workqueue: events_long drm_dp_mst_link_probe_work [ 449.022982] RIP: 0010:__list_add_valid+0x4d/0x70 [ 449.022987] Code: c3 48 89 d1 48 c7 c7 f0 e7 32 82 48 89 c2 e8 3a 49 b7 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 40 e8 32 82 e8 23 49 b7 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 90 e8 32 82 e8 [ 449.022991] RSP: 0018:ffffc900001abcb0 EFLAGS: 00010286 [ 449.022995] RAX: 0000000000000000 RBX: ffff88847dae2d58 RCX: 0000000000000001 [ 449.022999] RDX: 0000000080000001 RSI: ffff88849d914978 RDI: 00000000ffffffff [ 449.023002] RBP: ffff88847dae32c0 R08: ffff88849d914978 R09: 0000000000000000 [ 449.023006] R10: ffffc900001abcb8 R11: 0000000000000000 R12: ffff888490d98400 [ 449.023009] R13: ffff88847dae3230 R14: ffff88847db1c140 R15: ffff888490d98540 [ 449.023013] FS: 0000000000000000(0000) GS:ffff88849ff00000(0000) knlGS:0000000000000000 [ 449.023017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 449.023021] CR2: 00007fb96fafdc63 CR3: 0000000005610004 CR4: 0000000000760ee0 [ 449.023025] PKRU: 55555554 [ 449.023028] Call Trace: [ 449.023034] drm_dp_queue_down_tx+0x59/0x110 [ 449.023041] ? rcu_read_lock_sched_held+0x4d/0x80 [ 449.023050] ? kmem_cache_alloc_trace+0x2a6/0x2d0 [ 449.023060] drm_dp_send_link_address+0x74/0x870 [ 449.023065] ? __slab_free+0x3e1/0x5c0 [ 449.023071] ? lockdep_hardirqs_on+0xe0/0x1c0 [ 449.023078] ? lockdep_hardirqs_on+0xe0/0x1c0 [ 449.023097] drm_dp_check_and_send_link_address+0x9a/0xc0 [ 449.023106] drm_dp_mst_link_probe_work+0x9e/0x160 [ 449.023117] process_one_work+0x268/0x600 [ 449.023124] ? __schedule+0x307/0x8d0 [ 449.023139] worker_thread+0x37/0x380 [ 449.023149] ? process_one_work+0x600/0x600 [ 449.023153] kthread+0x140/0x160 [ 449.023159] ? kthread_park+0x80/0x80 [ 449.023169] ret_from_fork+0x24/0x50 Fixes: d308a881 ("drm/dp_mst: Kill the second sideband tx slot, save the world") Cc: Lyude Paul <lyude@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513103155.12336-1-imre.deak@intel.com
-
- May 14, 2020
-
-
Wolfram Sang authored
The R-Car DU driver calls drm_vblank_init via some helper functions in probe(). From what I checked, most drivers do this as well. I have a config now where DU always stays in deferred_probe state because of a missing dependency. This means that every time I rebind another driver like MMC, the vblank init message is displayed again when the DU driver is retried. Because the message doesn't really carry a useful information, I suggest to simply drop it. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200513201016.23047-1-wsa+renesas@sang-engineering.com
-
- May 13, 2020
-
-
Chris Wilson authored
Now that atomic64_fetch_add() exists we can use it to return the base context id, rather than the atomic64_add_return(N) - N concoction. Suggested-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-2-chris@chris-wilson.co.uk
-
- May 12, 2020
-
-
Wei Yongjun authored
The of_drm_find_bridge() function returns NULL on error, it doesn't return error pointers so this check doesn't work. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200430073145.52321-1-weiyongjun1@huawei.com
-
- May 11, 2020
-
-
Thomas Zimmermann authored
Storing the connector instance in struct mga_device avoids some dynamic memory allocation. On errors, the connector's initializer function now destroys the i2c structure. Done in preparation of converting mgag200 to simple-KMS helpers. v2: * improved commit message (Michael) * fixed error message for mgag200_vga_connector_init() (Sam) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Tested-by:
John Donnelly <John.p.donnelly@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
The fields mode_info, num_crtcs and mode in struct mga_device serve no purpose. Remove them. Signed-off-by:
-
Thomas Zimmermann authored
Mode configuration is now cleanued up automatically. While at it, move all mode-config code into mgag200_mode.c. Done in preparation of switching mgag200 to simple-KMS helpers. v2: * improve commit message (Sam) * rebased during cherry pick * also move bpp_shift initialization Signed-off-by:
-
Thomas Zimmermann authored
Done to simplify initialization code before embedding the DRM device instance in struct mga_device. Signed-off-by:
-
Thomas Zimmermann authored
Done in preparation of embedding the DRM device in struct mga_device. This patch makes the patch for embedding more readable. v2: * improved commit message (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
Mgag200 uses dev_private to look up struct mga_device for instances of struct drm_device. Use of dev_private is deprecated, so hide it in the helper function to_mga_device(). v2: * make to_mga_device() a function (Sam) Signed-off-by:
-
- May 10, 2020
-
-
Jason Yan authored
No other functions use the return value of pxa168fb_init_mode() and the return value is always 0 now. Make it return void. This fixes the following coccicheck warning: drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return "0" on line 597 Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Samuel Zou authored
Fix the following sparse warning: drivers/gpu/drm/i2c/tda998x_drv.c:1136:5: warning: symbol 'tda998x_audio_digital_mute' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Samuel Zou <zou_wei@huawei.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Douglas Anderson authored
People use panel-simple when they have panels that are builtin to their device. In these cases the HPD (Hot Plug Detect) signal isn't really used for hotplugging devices but instead is used for power sequencing. Panel timing diagrams (especially for eDP panels) usually have the HPD signal in them and it acts as an indicator that the panel is ready for us to talk to it. Sometimes the HPD signal is hooked up to a normal GPIO on a system. In this case we need to poll it in the correct place to know that the panel is ready for us. In some system designs the right place for this is panel-simple. When adding this support, we'll account for the case that there might be a circular dependency between panel-simple and the provider of the GPIO. The case this was designed for was for the "ti-sn65dsi86" bridge chip. If HPD is hooked up to one of the GPIOs provided by the bridge chip then in our probe function we'll always get back -EPROBE_DEFER. Let's handle this by allowing this GPIO to show up late if we saw -EPROBE_DEFER during probe. NOTE: since the gpio_get_optional() is used, if the "hpd-gpios" isn't there our variable will just be NULL and we won't do anything in prepare(). Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Douglas Anderson authored
In the cases where there is no connector in a system there's no great place to put "hpd-gpios". As per discussion [1] the best place to put it is in the panel. Add this to the device tree bindings. [1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Douglas Anderson authored
All info I could find about this panel show that it behaves the same as the BOE NV133FHM-N61. However, it definitely appears to be a unique panel because reading the EDID shows "NV133FHM-N62". We'll add a string match for the new panel but until we find something unique about it we'll just point at the N61's structures. Signed-off-by:
-
Douglas Anderson authored
This panel appears to be the same or nearly the same as the BOE NV133FHM-N61, but since (in the very least) it identifies itself as a different model in the EDID we should add a new compatible string for it. Signed-off-by:
-
Douglas Anderson authored
The BOE NV133FHM-N61 is documented in the original commit to be a 13.3" panel, but the size listed in our struct doesn't match. Specifically: math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92 Searching around on the Internet shows that the size that was in the structure was the "Outline Size", not the "Display Area". Let's fix it. Also the Internet says that this panel supports 262K colors. That's 6bpp, not 8bpp. Fixes: b0c664cc ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by:
-
- May 08, 2020
-
-
Mika Kahola authored
Make an additional note on DRM format modifiers for x and y tiling. These format modifiers are defined for BDW+ platforms and therefore definition is not valid for older gens. This is due to address swizzling for tiled surfaces is no longer used. For newer platforms main memory controller has a more effective address swizzling algorithm. v2: Rephrase comment (Daniel) Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Thomas Zimmermann authored
Suspending failed because there's no mode if the CRTC is being disabled. Early-out in this case. This fixes runtime PM for ast. v3: * fixed commit message v2: * added Tested-by/Reported-by tags * added Fixes tags and CC (Sam) * improved comment Signed-off-by:
Cary Garrett <cogarre@gmail.com> Tested-by:
-
Samuel Zou authored
Fix the following sparse warning: drivers/gpu/drm/ast/ast_mode.c:564:6: warning: symbol 'ast_primary_plane_helper_atomic_update' was not declared. Should it be static? Reported-by:
-
Konrad Dybcio authored
This adds support for TMP5P5 NT35596 1080x1920 video mode panel that can be found on some Asus Zenfone 2 Laser (Z00T) devices. This panel seems to only be found in this device and we have no straightforward way of actually getting the correct model number, as no schematics are released publicly. Signed-off-by:
Konrad Dybcio <konradybcio@gmail.com> Signed-off-by:
-
Konrad Dybcio authored
Signed-off-by:
-
Randy Dunlap authored
Add MODULE_LICENSE() to the panel-visionox-rm69299 driver to fix a build warning. WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-visionox-rm69299.o Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: c7f66d32 ("drm/panel: add support for rm69299 visionox panel") Cc: Harigovindan P <harigovi@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
- May 07, 2020
-
-
Ezequiel Garcia authored
We need to keep the reference to the drm_gem_object until the last access by vkms_dumb_create. Therefore, the put the object after it is used. This fixes a use-after-free issue reported by syzbot. While here, change vkms_gem_create() symbol to static. Reported-and-tested-by:
<syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
-
Melissa Wen authored
This patch proposes a change in the behavior of the cursor to enable it as soon as the vkms module is added. Enabling the cursor by default appears to be an expected and more friendly behavior, especially when running IGT tests. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
-
Zou Wei authored
Fix the following sparse warning: drivers/gpu/drm/udl/udl_modeset.c:269:5: warning: symbol 'udl_handle_damage' was not declared. Should it be static? Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0, suggest !E drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to 0 drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0 Signed-off-by:
-
Harigovindan P authored
Add support for Visionox rm69299 panel. Signed-off-by:
Harigovindan P <harigovi@codeaurora.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Harigovindan P authored
Documenting compatible string vendor "visionox" in vendor-prefix yaml file. Signed-off-by:
-
Christophe JAILLET authored
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in the 'w100fb_restore_vidmem' function. (these functions are called respectively from the 'suspend' and the 'resume' functions) However, it is also freed in the 'remove' function. In order to avoid a potential double free, set the corresponding pointer to NULL once freed in the 'w100fb_restore_vidmem' function. Fixes: aac51f09 ("[PATCH] w100fb: Rewrite for platform independence") Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Antonino Daplas <adaplas@pol.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: <stable@vger.kernel.org> # v2.6.14+ Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
- May 05, 2020
-
-
Nirmoy Das authored
Userspace can severely fragment rb_hole_addr rbtree by manipulating alignment while allocating buffers. Fragmented rb_hole_addr rbtree would result in large delays while allocating buffer object for a userspace application. It takes long time to find suitable hole because if we fail to find a suitable hole in the first attempt then we look for neighbouring nodes using rb_prev()/rb_next(). Traversing rbtree using rb_prev()/rb_next() can take really long time if the tree is fragmented. This patch improves searches in fragmented rb_hole_addr rbtree by modifying it to an augmented rbtree which will store an extra field in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum hole size for its subtree in drm_mm_node->subtree_max_hole. Using drm_mm_node->subtree_max_hole, it is possible to eliminate a complete subtree if that subtree is unable to serve a request hence reducing number of rb_prev()/rb_next() used. With this patch applied, 1 million bo allocs on amdgpu took ~8 sec, compared to 50k bo allocs which took 28 sec without it. partial test code: int test_fragmentation(void) { int i = 0; uint32_t minor_version; uint32_t major_version; struct amdgpu_bo_alloc_request request = {}; amdgpu_bo_handle vram_handle[MAX_ALLOC] = {}; amdgpu_device_handle device_handle; request.alloc_size = 4096; request.phys_alignment = 8192; request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM; int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC); amdgpu_device_initialize(fd, &major_version, &minor_version, &device_handle); for (i = 0; i < MAX_ALLOC; i++) { amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]); } for (i = 0; i < MAX_ALLOC; i++) amdgpu_bo_free(vram_handle[i]); return 0; } v2: Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole v3: insert_hole_addr() should be static a function fix return value of next_hole_high_addr()/next_hole_low_addr() Reported-by:kbuild test robot <lkp@intel.com> v4: Fix commit message. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/364341/ Signed-off-by:
-
Maya Rashish authored
It was removed in: Author: Christian König <christian.koenig@amd.com> Date: Wed Sep 25 11:38:50 2019 +0200 drm/ttm: remove pointers to globals Signed-off-by:Maya Rashish <coypu@sdf.org> Reviewed-by:
-
Emmanuel Vadot authored
Source file was dual licenced but the header was omitted, fix that. Contributors for this file are: Daniel Vetter <daniel.vetter@ffwll.ch> Matt Roper <matthew.d.roper@intel.com> Maxime Ripard <mripard@kernel.org> Noralf Trønnes <noralf@tronnes.org> Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by:
-
Michal Orzel authored
As suggested by the TODO list for the kernel DRM subsystem, replace the deprecated functions that take/drop modeset locks with new helpers. Signed-off-by:
Michal Orzel <michalorzel.eng@gmail.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic S805X/Y uses the same die as the S905X, but with more limited graphics capabilities. This adds a soc version detection adding specific limitations on the HDMI mode selections. Here, we limit to HDMI 1.2a max HDMI PHY clock frequency. Changes sinces v1: - Moved frequency check in the vclk code, and also checks DMT modes Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a] Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com
-
