This patch only refactors the existing sockmap code. This will allow
much of the psock initialization code path and bpf helper codes to
work for both sockmap bpf map types that are backed by an array, the
currently supported type, and the new hash backed bpf map type
sockhash.

Most the fallout comes from three changes,

  - Pushing bpf programs into an independent structure so we
    can use it from the htab struct in the next patch.
  - Generalizing helpers to use void *key instead of the hardcoded
    u32.
  - Instead of passing map/key through the metadata we now do
    the lookup inline. This avoids storing the key in the metadata
    which will be useful when keys can be longer than 4 bytes. We
    rename the sk pointers to sk_redir at this point as well to
    avoid any confusion between the current sk pointer and the
    redirect pointer sk_redir.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

--build-id may not be a default linker config.
Make sure it's used when linking urandom_read test program.
Otherwise test_stacktrace_build_id[_nmi] tests will be failling.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jesper Dangaard Brouer says:

====================
The kernel is moving files under Documentation to use the RST
(reStructuredText) format and Sphinx [1].  This patchset converts the
files under Documentation/bpf/ into RST format.  The Sphinx
integration is left as followup work.

[1] https://www.kernel.org/doc/html/latest/doc-guide/sphinx.html

This patchset have been uploaded as branch bpf_doc10 on github[2], so
reviewers can see how GitHub renders this.

[2] https://github.com/netoptimizer/linux/tree/bpf_doc10/Documentation/bpf


====================

Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

I always forget howto run the BPF selftests. Thus, lets add that info
to the QA document.

Documentation was based on Cilium's documentation:
 http://cilium.readthedocs.io/en/latest/bpf/#verifying-the-setup



Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Same story as bpf_design_QA.rst RST format conversion.

Again thanks to Quentin Monnet <quentin.monnet@netronome.com> for
fixes and patches that have been squashed.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The RST formatting is done such that that when rendered or converted
to different formats, an automatic index with links are created to the
subsections.

Thus, the questions are created as sections (or subsections), in-order
to get the wanted auto-generated FAQ/QA index.

Special thanks to Quentin Monnet <quentin.monnet@netronome.com> who
have reviewed and corrected both RST formatting and GitHub rendering
issues in this file.  Those commits have been squashed.

I've manually tested that this also renders nicely if included as part
of the kernel 'make htmldocs'.  As the end-goal is for this to become
more integrated with kernel-doc project/movement.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This will cause them to get auto rendered, e.g. when viewing them on GitHub.
Followup patches will correct the content to be RST compliant.

Also adjust README.rst to point to the renamed files.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

A README.rst file in a directory have special meaning for sites like
github, which auto renders the contents.  Plus search engines like
Google also index these README.rst files.

Auto rendering allow us to use links, for (re)directing eBPF users to
other places where docs live.  The end-goal would be to direct users
towards https://www.kernel.org/doc/html/latest

 but we haven't written
the full docs yet, so we start out small and take this incrementally.

This directory itself contains some useful docs, which can be linked
to from the README.rst file (verified this works for github).

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jakub Kicinski says:

====================
Following patches address build issues after recent move to libbpf.
For out-of-tree builds we would see the following error:

gcc: error: samples/bpf/../../tools/lib/bpf/libbpf.a: No such file or directory

libbpf build system is now always invoked explicitly rather than
relying on building single objects most of the time.  We need to
resolve the friction between Kbuild and tools/ build system.

Mini-library called libbpf.h in samples is renamed to bpf_insn.h,
using linux/filter.h seems not completely trivial since some samples
get upset when order on include search path in changed.  We do have
to rename libbpf.h, however, because otherwise it's hard to reliably
get to libbpf's header in out-of-tree builds.

v2:
 - fix the build error harder (patch 3);
 - add patch 5 (make clang less noisy).
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Building samples with clang ignores the $(Q) setting, always
printing full command to the output.  Make it less verbose.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Make complains that it doesn't know how to make libbpf.a:

scripts/Makefile.host:106: target 'samples/bpf/../../tools/lib/bpf/libbpf.a' doesn't match the target pattern

Now that we have it as a dependency of the sources simply add libbpf.a
to libraries not objects.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There are many ways users may compile samples, some of them got
broken by commit 5f938057 ("samples: bpf: compile and link
against full libbpf").  Improve path resolution and make libbpf
building a dependency of source files to force its build.

Samples should now again build with any of:
 cd samples/bpf; make
 make samples/bpf/
 make -C samples/bpf
 cd samples/bpf; make O=builddir
 make samples/bpf/ O=builddir
 make -C samples/bpf O=builddir
 export KBUILD_OUTPUT=builddir
 make samples/bpf/
 make -C samples/bpf

Fixes: 5f938057

 ("samples: bpf: compile and link against full libbpf")
Reported-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The libbpf.h file in samples is clashing with libbpf's header.
Since it only includes a subset of filter.h instruction helpers
rename it to bpf_insn.h.  Drop the unnecessary include of bpf/bpf.h.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There are two files in the tree called libbpf.h which is becoming
problematic.  Most samples don't actually need the local libbpf.h
they simply include it to get to bpf/bpf.h.  Include bpf/bpf.h
directly instead.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
This series follows up mostly with with some minor cleanups on top
of 'Move ld_abs/ld_ind to native BPF' as well as implements better
32/64 bit immediate load into register and saves tail call init on
cBPF for the arm64 JIT. Last but not least we add a couple of test
cases. For details please see individual patches. Thanks!

v1 -> v2:
  - Minor fix in i64_i16_blocks() to remove 24 shift.
  - Added last two patches.
  - Added Acks from prior round.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add test cases where we combine semi-random imm values, mainly for testing
JITs when they have different encoding options for 64 bit immediates in
order to reduce resulting image size.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We can trivially save 4 bytes in prologue for cBPF since tail calls
can never be used from there. The register push/pop is pairwise,
here, x25 (fp) and x26 (tcc), so no point in changing that, only
reset to zero is not needed.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Improve the JIT to emit 64 and 32 bit immediates, the current
algorithm is not optimal and we often emit more instructions
than actually needed. arm64 has movz, movn, movk variants but
for the current 64 bit immediates we only use movz with a
series of movk when needed.

For example loading ffffffffffffabab emits the following 4
instructions in the JIT today:

  * movz: abab, shift:  0, result: 000000000000abab
  * movk: ffff, shift: 16, result: 00000000ffffabab
  * movk: ffff, shift: 32, result: 0000ffffffffabab
  * movk: ffff, shift: 48, result: ffffffffffffabab

Whereas after the patch the same load only needs a single
instruction:

  * movn: 5454, shift:  0, result: ffffffffffffabab

Another example where two extra instructions can be saved:

  * movz: abab, shift:  0, result: 000000000000abab
  * movk: 1f2f, shift: 16, result: 000000001f2fabab
  * movk: ffff, shift: 32, result: 0000ffff1f2fabab
  * movk: ffff, shift: 48, result: ffffffff1f2fabab

After the patch:

  * movn: e0d0, shift: 16, result: ffffffff1f2fffff
  * movk: abab, shift:  0, result: ffffffff1f2fabab

Another example with movz, before:

  * movz: 0000, shift:  0, result: 0000000000000000
  * movk: fea0, shift: 32, result: 0000fea000000000

After:

  * movz: fea0, shift: 32, result: 0000fea000000000

Moreover, reuse emit_a64_mov_i() for 32 bit immediates that
are loaded via emit_a64_mov_i64() which is a similar optimization
as done in 6fe8b9c1

 ("bpf, x64: save several bytes by using
mov over movabsq when possible"). On arm64, the latter allows to
use a single instruction with movn due to zero extension where
otherwise two would be needed. And last but not least add a
missing optimization in emit_a64_mov_i() where movn is used but
the subsequent movk not needed. With some of the Cilium programs
in use, this shrinks the needed instructions by about three
percent. Tested on Cavium ThunderX CN8890.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Follow-up to 816d9ef3

 ("bpf, arm64: remove ld_abs/ld_ind") in
that the extra 4 byte JIT scratchpad is not needed anymore since it
was in ld_abs/ld_ind as stack buffer for bpf_load_pointer().

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The extra skb_copy_bits() buffer is not used anymore, therefore
remove the extra 4 byte stack space requirement.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Make the RETPOLINE_{RA,ED}X_BPF_JIT() a bit more readable by
cleaning up the macro, aligning comments and spacing.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since fe83963b

 ("bpf, sparc64: remove ld_abs/ld_ind") it's not
used anymore therefore remove it.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The ool_skb_header_pointer() and size_to_len() is unused same as
tmp_offset, therefore remove all of them.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Updated optstring parameter for getopt_long() to accept short options.
Also updated usage() function.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Song Liu says:
====================
Changes v2 -> v3:
  Improve syntax based on suggestion by Tobin C. Harding.

Changes v1 -> v2:
  1. Rename some variables to (hopefully) reduce confusion;
  2. Check irq_work status with IRQ_WORK_BUSY (instead of work->sem);
  3. In Kconfig, let BPF_SYSCALL select IRQ_WORK;
  4. Add static to DEFINE_PER_CPU();
   5. Remove pr_info() in stack_map_init().
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This new test captures stackmap with build_id with hardware event
PERF_COUNT_HW_CPU_CYCLES.

Because we only support one ips-to-build_id lookup per cpu in NMI
context, stack_amap will not be able to do the lookup in this test.
Therefore, we didn't do compare_stack_ips(), as it will alwasy fail.

urandom_read.c is extended to run configurable cycles so that it can be
caught by the perf event.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, we cannot parse build_id in nmi context because of
up_read(&current->mm->mmap_sem), this makes stackmap with build_id
less useful. This patch enables parsing build_id in nmi by putting
the up_read() call in irq_work. To avoid memory allocation in nmi
context, we use per cpu variable for the irq_work. As a result, only
one irq_work per cpu is allowed. If the irq_work is in-use, we
fallback to only report ips.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
This series started out as a follow up to the bpftool perf event dumping
patches.

As suggested by Daniel patch 1 makes use of PERF_SAMPLE_TIME to simplify
code and improve accuracy of timestamps.

Remaining patches are trying to move perf event loop into libbpf as
suggested by Alexei.  One user for this new function is bpftool which
links with libbpf nicely, the other, unfortunately, is in samples/bpf.
Remaining patches make samples/bpf link against full libbpf.a (not just
a handful of objects).  Once we have full power of libbpf at our disposal
we can convert some of XDP samples to use libbpf loader instead of
bpf_load.c.  My understanding is that this is the desired direction,
at least for networking code.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers.  This way newcomers will be exposed to the
recommended library from the start.

Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

BPF programs only have to specify the target kernel version for
tracing related hooks, in networking world that requirement does
not really apply.  Loosen the checks in libbpf to reflect that.

bpf_object__open() users will continue to see the error for backward
compatibility (and because prog_type is not available there).

Error code for NULL file name is changed from ENOENT to EINVAL,
as it seems more appropriate, hopefully, that's an OK change.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix spelling mistakes, improve and clarify the language of comments
in libbpf.h.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There are two copies of event reading loop - in bpftool and
trace_helpers "library".  Consolidate them and move the code
to libbpf.  Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

samples/bpf currently cherry-picks object files from tools/lib/bpf
to link against.  Just compile the full library and link statically
against it.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Both tools/lib/bpf/libbpf.h and samples/bpf/bpf_load.h define their
own version of struct bpf_map_def.  The version in bpf_load.h has
more fields.  libbpf does not support inner maps and its definition
of struct bpf_map_def lacks the related fields.  Rename the definition
in bpf_load.h (samples/bpf) to avoid conflicts.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Ask the kernel to include sample time in each even instead of
reading the clock.  This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sync the header from include/uapi/linux/bpf.h which was updated to add
fib lookup helper function. This fixes selftests/bpf build failure.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

'|& ...' is a bash 4.0+ construct which is not guaranteed to be available
when using '$(shell ...)' in a Makefile. Fall back to the more portable
'2>&1 | ...'.

Fixes the following warning during compilation:

	/bin/sh: 1: Syntax error: "&" unexpected

Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

David Ahern says:

====================
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet is expected to continue up the stack
for full processing.

The response from a FIB and neighbor lookup is either the egress index
with the bpf_fib_lookup struct filled in with dmac and gateway or
0 meaning the packet should continue up the stack. In time we can
revisit this to return the FIB lookup result errno if it is one of the
special RTN_'s such as RTN_BLACKHOLE (-EINVAL) so that the XDP
programs can do an early drop if desired.

Patches 1-6 do some more refactoring to IPv6 with the end goal of
extracting a FIB lookup function that aligns with fib_lookup for IPv4,
basically returning a fib6_info without creating a dst based entry.

Patch 7 adds lookup functions to the ipv6 stub. These are needed since
bpf is built into the kernel and ipv6 may not be built or loaded.

Patch 8 adds the bpf helper and 9 adds a sample program.

v3
- remove ETH_ALEN and in6_addr from uapi header

v2
- removed pkt_access from bpf_func_proto as noticed by Daniel
- added check in that IPv6 forwarding is enabled
- added DaveM's ack on patches 1-7 and 9 based on v1 response and
  fact that no changes were made to them in v2

v1
- updated commit messages and cover letter
- added comment to sample program noting lack of verification on
  egress device supporting XDP

RFC v2
- fixed use of foward helper from cls_act as noted by Daniel
- in patch 1 rename fib6_lookup_1 as well for consistency
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.

Take this only as a simple example of fast-path forwarding.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet continues up the stack.

If it is to be forwarded, the forwarding can be done directly if the
neighbor is already known. If the neighbor does not exist, the first
few packets go up the stack for neighbor resolution. Once resolved, the
xdp program provides the fast path.

On successful lookup the nexthop dmac, current device smac and egress
device index are returned.

The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
are implemented in this patch. The API includes layer 4 parameters if
the XDP program chooses to do deep packet inspection to allow compare
against ACLs implemented as FIB rules.

Header rewrite is left to the XDP program.

The lookup takes 2 flags:
- BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
  straight to the table associated with the device (expert setting for
  those looking to maximize throughput)

- BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
  Default is an ingress lookup.

Initial performance numbers collected by Jesper, forwarded packets/sec:

       Full stack    XDP FIB lookup    XDP Direct lookup
IPv4   1,947,969       7,074,156          7,415,333
IPv6   1,728,000       6,165,504          7,262,720

These number are single CPU core forwarding on a Broadwell
E5-1650 v4 @ 3.60GHz.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>