- Nov 22, 2022
-
-
Wang ShaoBo authored
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI memory, because we need to track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree(). Fixes: d38a648d ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg") Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jacob Keller authored
Commit 1229b339 ("ice: Add low latency Tx timestamp read") refactored PTP timestamping logic to use a threaded IRQ instead of a separate kthread. This implementation introduced ice_misc_intr_thread_fn and redefined the ice_ptp_process_ts function interface to return a value of whether or not the timestamp processing was complete. ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts and convert it into either IRQ_HANDLED if there were no more timestamps to be processed, or IRQ_WAKE_THREAD if the thread should continue processing. This is not correct, as the kernel does not re-schedule threaded IRQ functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ function. This results in the ice_ptp_process_ts function (and in turn the ice_ptp_tx_tstamp function) from only being called exactly once per interrupt. If an application sends a burst of Tx timestamps without waiting for a response, the interrupt will trigger for the first timestamp. However, later timestamps may not have arrived yet. This can result in dropped or discarded timestamps. Worse, on E822 hardware this results in the interrupt logic getting stuck such that no future interrupts will be triggered. The result is complete loss of Tx timestamp functionality. Fix this by modifying the ice_misc_intr_thread_fn to perform its own polling of the ice_ptp_process_ts function. We sleep for a few microseconds between attempts to avoid wasting significant CPU time. The value was chosen to allow time for the Tx timestamps to complete without wasting so much time that we overrun application wait budgets in the worst case. The ice_ptp_process_ts function also currently returns false in the event that the Tx tracker is not initialized. This would result in the threaded IRQ handler never exiting if it gets started while the tracker is not initialized. Fix the function to appropriately return true when the tracker is not initialized. Note that this will not reproduce with default ptp4l behavior, as the program always synchronously waits for a timestamp response before sending another timestamp request. Reported-by:
Siddaraju DH <siddaraju.dh@intel.com> Fixes: 1229b339 ("ice: Add low latency Tx timestamp read") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
YueHaibing authored
If skb_linearize() fails in tipc_disc_rcv(), we need to free the skb instead of handle it. Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20221119072832.7896-1-yuehaibing@huawei.com Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-18 (iavf) Ivan Vecera resolves issues related to reset by adding back call to netif_tx_stop_all_queues() and adding calls to dev_close() to ensure device is properly closed during reset. Stefan Assmann removes waiting for setting of MAC address as this breaks ARP. Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock between remove and shutdown. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix race condition between iavf_shutdown and iavf_remove iavf: remove INITIAL_MAC_SET to allow gARP to work properly iavf: Do not restart Tx queues after reset task failure iavf: Fix a crash during reset task ==================== Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.com Signed-off-by:
-
Jakub Kicinski authored
Xin Long says: ==================== tipc: fix two race issues in tipc_conn_alloc The race exists beteen tipc_topsrv_accept() and tipc_conn_close(), one is allocating the con while the other is freeing it and there is no proper lock protecting it. Therefore, a null-pointer-defer and a use-after-free may be triggered, see details on each patch. ==================== Link: https://lore.kernel.org/r/cover.1668807842.git.lucien.xin@gmail.com Signed-off-by:
-
Xin Long authored
One extra conn_get() is needed in tipc_conn_alloc(), as after tipc_conn_alloc() is called, tipc_conn_close() may free this con before deferencing it in tipc_topsrv_accept(): tipc_conn_alloc(); newsk = newsock->sk; <---- tipc_conn_close(); write_lock_bh(&sk->sk_callback_lock); newsk->sk_data_ready = tipc_conn_data_ready; Then an uaf issue can be triggered: BUG: KASAN: use-after-free in tipc_topsrv_accept+0x1e7/0x370 [tipc] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x178/0x4b0 kasan_report+0x8c/0x100 kasan_check_range+0x179/0x1e0 tipc_topsrv_accept+0x1e7/0x370 [tipc] process_one_work+0x6a3/0x1030 worker_thread+0x8a/0xdf0 This patch fixes it by holding it in tipc_conn_alloc(), then after all accessing in tipc_topsrv_accept() releasing it. Note when does this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns 0 or -1 only, we don't need to check for "> 0". Fixes: c5fa7b3c ("tipc: introduce new TIPC server infrastructure") Signed-off-by:Xin Long <lucien.xin@gmail.com> Acked-by:
-
Xin Long authored
A crash was reported by Wei Chen: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:tipc_conn_close+0x12/0x100 Call Trace: tipc_topsrv_exit_net+0x139/0x320 ops_exit_list.isra.9+0x49/0x80 cleanup_net+0x31a/0x540 process_one_work+0x3fa/0x9f0 worker_thread+0x42/0x5c0 It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(), con is allocated in conn_idr then its sock is set: con = tipc_conn_alloc(); ... <----[1] con->sock = newsock; If tipc_conn_close() is called in anytime of [1], the null-pointer-def is triggered by con->sock->sk due to con->sock is not yet set. This patch fixes it by moving the con->sock setting to tipc_conn_alloc() under s->idr_lock. So that con->sock can never be NULL when getting the con from s->conn_idr. It will be also safer to move con->server and flag CF_CONNECTED setting under s->idr_lock, as they should all be set before tipc_conn_alloc() is called. Fixes: c5fa7b3c ("tipc: introduce new TIPC server infrastructure") Reported-by:
Wei Chen <harperchen1110@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the ccr read error handling case instead of 0, as done elsewhere in this function. Fixes: 3265f421 ("net: phy: at803x: add fiber support") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com Signed-off-by:
-
- Nov 21, 2022
-
-
Dan Carpenter authored
This code accidentally uses the RX macro twice instead of the RX and TX. Fixes: 6c635f78 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member in struct key_vector. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Daniel Díaz authored
The `nettest` binary, built from `selftests/net/nettest.c`, was expected to be found in the path during test execution of `fcnal-test.sh` and `pmtu.sh`, leading to tests getting skipped when the binary is not installed in the system, as can be seen in these logs found in the wild [1]: # TEST: vti4: PMTU exceptions [SKIP] [ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm6udp not supported # TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP] [ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm4udp not supported The `unicast_extensions.sh` tests also rely on `nettest`, but it runs fine there because it looks for the binary in the current working directory [2]: The same mechanism that works for the Unicast extensions tests is here copied over to the PMTU and functional tests. [1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221 [2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958 Signed-off-by:
Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains late Netfilter fixes for net: 1) Use READ_ONCE()/WRITE_ONCE() to update ct->mark, from Daniel Xu. Not reported by syzbot, but I presume KASAN would trigger post a splat on this. This is a rather old issue, predating git history. 2) Do not set up extensions for set element with end interval flag set on. This leads to bogusly skipping this elements as expired when listing the set/map to userspace as well as increasing memory consumpton when stateful expressions are used. This issue has been present since 4.18, when timeout support for rbtree set was added. ==================== Signed-off-by: -
Lu Wei authored
Function sparx5_tc_setup_qdisc_ets() always returns negative value because it return -EOPNOTSUPP in the end. This patch returns the rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly. Fixes: 21122542 ("net: microchip: sparx5: add support for offloading ets qdisc") Signed-off-by:
Lu Wei <luwei32@huawei.com> Reviewed-by:
Daniel Machon <daniel.machon@microchip.com> Signed-off-by:
-
David S. Miller authored
Shang XiaoJing says: ==================== nfc: Fix potential memory leak of skb There are still somewhere maybe leak the skb, fix the memleaks by adding fail path. ==================== Signed-off-by: -
Shang XiaoJing authored
s3fwrn5_nci_send() won't free the skb when it failed for the check before s3fwrn5_write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: c04c674f ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
Shang XiaoJing authored
nxp_nci_send() won't free the skb when it failed for the check before write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: dece4585 ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by:
-
Shang XiaoJing authored
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() won't free the skb when it failed for the test_bit(). Free the skb when test_bit() failed. Fixes: b5b3e23e ("NFC: nfcmrvl: add i2c driver") Signed-off-by:
-
- Nov 19, 2022
-
-
YueHaibing authored
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by:
Saeed Mahameed <saeed@kernel.org> Reviewed-by:
Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by:
-
Hangbin Liu authored
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by:
Liang Li <liali@redhat.com> Fixes: 4e24be01 ("bonding: add new parameter ns_targets") Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by:
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: fixes for v6.1 - Ensure that information displayed by "devlink port show" reflects the number of lanes available to be split. - Avoid NULL dereference in ethtool test code. ==================== Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.com Signed-off-by: -
Jaco Coetzee authored
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by:
Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Diana Wang authored
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b54 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by:
Diana Wang <na.wang@corigine.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
-
Yang Yingliang authored
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com Signed-off-by:
-
Yang Yingliang authored
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52deb ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb3730 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by:
-
Zhang Changzhong authored
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by:
-
Hui Tang authored
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e0 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by:
Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.com Signed-off-by:
-
Peter Kosyh authored
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1 ("net/mlx4: Add A0 hybrid steering") Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru Signed-off-by:
-
Liu Jian authored
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.com Signed-off-by:
-
Slawomir Laba authored
Fix a deadlock introduced by commit 97457801 ("iavf: Add waiting so the port is initialized in remove") due to race condition between iavf_shutdown and iavf_remove, where iavf_remove stucks forever in while loop since iavf_shutdown already set __IAVF_REMOVE adapter state. Fix this by checking if the __IAVF_IN_REMOVE_TASK has already been set and return if so. Fixes: 97457801 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by:
Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Marek Szlosek <marek.szlosek@intel.com> Signed-off-by:
-
Stefan Assmann authored
IAVF_FLAG_INITIAL_MAC_SET prevents waiting on iavf_is_mac_set_handled() the first time the MAC is set. This breaks gratuitous ARP because the MAC address has not been updated yet when the gARP packet is sent out. Current behaviour: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: ee:04:19:14:ec:ea $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:23:41.676611 ee:04:19:14:ec:ea > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 With IAVF_FLAG_INITIAL_MAC_SET removed: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: 3e:8a:16:a2:37:6d $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:28:01.836608 00:11:22:33:44:55 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 Fixes: 35a2443d ("iavf: Add waiting for response from PF in set mac") Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Ivan Vecera authored
After commit aa626da9 ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Tested-by:
-
Ivan Vecera authored
Recent commit aa626da9 ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by:
-
- Nov 18, 2022
-
-
Pablo Neira Ayuso authored
Elements with an end interval flag set on do not store extensions. The global set definition is currently setting on the timeout and stateful expression for end interval elements. This leads to skipping end interval elements from the set->ops->walk() path as the expired check bogusly reports true. Moreover, do not set up stateful expressions for elements with end interval flag set on since this is never used. Fixes: 65038428 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Daniel Xu authored
nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Daniel Xu <dxu@dxuuu.xyz> Signed-off-by:
-
Wang Hai authored
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee7 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Lin Ma authored
Previously we leverage NCI_UNREG and the lock inside nci_close_device to prevent the race condition between opening a device and closing a device. However, it still has problem because a failed opening command will erase the NCI_UNREG flag and allow another opening command to bypass the status checking. This fix corrects that by making sure the NCI_UNREG is held. Reported-by:
<syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com> Fixes: 48b71a9e ("NFC: add NCI_UNREG flag to eliminate the race") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Vladimir Oltean authored
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f0974 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
David Howells authored
After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d8 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by:David Howells <dhowells@redhat.com> Tested-by:
<zdi-disclosures@trendmicro.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by:
-
Wang Yufen authored
After commit afef88e6 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e6 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Cc: Daniel Müller <deso@posteo.net> Signed-off-by:
-
Mahesh Bandewar authored
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
