- Apr 02, 2006
-
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- removed redundant Video For Linux API help text - fixed dependency / selection for USB_W9968CF Signed-off-by:
-
Hartmut Hackmann authored
There seem to be many variants of this cards with different feature sets. This entry supports analog TV, CVBS and s-video input, FM radio and DVB-T if they are supported by the hardware. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
The .vmux entry needs to be 1 instead of 0 Signed-off-by:
-
Hartmut Hackmann authored
Added ID entries for the Genius VideoWonder DVB-T and the LifeView FlyTV Platinum Gold Signed-off-by:
-
Mauro Carvalho Chehab authored
Default values were wrong. Fixing it. Signed-off-by: -
Mike Isely authored
The FWSEND parameter controls the size of the firmware chunks sent down the I2C bus to the chip. Previously this had been set to 1024 but unfortunately some I2C implementations can't transfer data in such big gulps. Specifically, the pvrusb2 driver has a hard limit of around 60 bytes, due to the encapsulation there of I2C traffic into USB messages. So we have to significantly reduce this parameter. Acked-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
Thanks to: Andrew Cohen <cohen@andy.bu.edu> Signed-off-by:
-
Ricardo Cerqueira authored
After the recent video-buf "generic" adaptation, the PCI wrappers got completely broken, and all of the DMA sound modules stopped working (and failed with an oops) Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Michael Krufky authored
- Added keycodes for the DViCO FusionHDTV portable remote control. - Enabled the remote control for both versions of FusionHDTV DVB-T USB and the FusionHDTV 5 USB Gold (ATSC) Signed-off-by:
-
maximilian attems authored
The bt8xx drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by:
maximilian attems <maks@sternwelten.at> Signed-off-by:
-
Randy Dunlap authored
one printk needs a newline at end; better MODULE_PARM_DESC text formatting; don't need to init static data to 0; Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
maximilian attems authored
The saa7134 drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- Add missing class check to tveeprom_attach_adapter. - Add CX2341X specific IR probe address list. Signed-off-by:
-
- Apr 01, 2006
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabled
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected [MMC] Add OMAP MMC host driver
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change [ARM] 3434/1: pxa i2s amsl define [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h [ARM] Allow un-muxed syscalls to be available for everyone [ARM] 3420/1: Missing clobber in example code [ARM] nommu: fixups for the exception vectors [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile [ARM] nommu: start-up code [ARM] nommu: MPU support in boot/compressed/head.S
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Avoid "u64 foo : 32;" for gcc3 vs. gcc4 compatibility [IA64] Export cpu cache info by sysfs
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix typo in earlier cifs_unlink change and protect one [CIFS] Incorrect signature sent on SMB Read [CIFS] Fix unlink oops when indirectly called in rename error path [CIFS] Fix two remaining coverity scan tool warnings. [CIFS] Set correct lock type on new posix unlock call [CIFS] Upate cifs change log [CIFS] Fix slow oplock break response when mounts to different [CIFS] Workaround various server bugs found in testing at connectathon [CIFS] Allow fallback for setting file size to Procom SMB server when [CIFS] Make POSIX CIFS Extensions SetFSInfo match exactly what we want [CIFS] Move noisy debug message (triggerred by some older servers) from [CIFS] Use correct pid on new cifs posix byte range lock call [CIFS] Add posix (advisory) byte range locking support to cifs client [CIFS] CIFS readdir perf optimizations part 1 [CIFS] Free small buffers earlier so we exceed the cifs [CIFS] Fix large (ie over 64K for MaxCIFSBufSize) buffer case for wrapping [CIFS] Convert remaining places in fs/cifs from [CIFS] SessionSetup cleanup part 2 [CIFS] fix compile error (typo) and warning in cifssmb.c [CIFS] Cleanup NTLMSSP session setup handling
-
Steve French authored
extra path. Since cifs_unlink can also be called from rename path and there was one report of oops am making the extra check for null inode. Signed-off-by:Steve French <sfrench@us.ibm.com>
-
Steve French authored
Fixes Samba bug 3621 and kernel.org bug 6147 For servers which require SMB/CIFS packet signing, we were sending the wrong signature (all zeros) on SMB Read request. The new cifs routine to do signatures across an iovec was not complete - and SMB Read, unlike the new SMBWrite2, did not fall back to the older routine (ie use SendReceive vs. the more efficient SendReceive2 ie used the older cifs_sign_smb vs. the disabled cifs_sign_smb2) for calculating signatures. This finishes up cifs_sign_smb2/cifs_calc_signature2 so that the callers of SendReceive2 can get SMB/CIFS packet signatures. Now that cifs_sign_smb2 is supported, we could start using it in the write path but this smaller fix does not include the change to use SMBWrite2 when signatures are required (which when enabled will make more Writes more efficient and alloc less memory). Currently Write2 is only used when signatures are not required at the moment but after more testing we will enable that as well). Thanks to James Slepicka and Sam Flory for initial investigation. Signed-off-by: -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Allow skb headroom to be overridden [TCP]: Kill unused extern decl for tcp_v4_hash_connecting() [NET]: add SO_RCVBUF comment [NET]: Deinline some larger functions from netdevice.h [DCCP]: Use NULL for pointers, comfort sparse. [DECNET]: Fix refcount
-
Jes Sorensen authored
Commit 70674f95 : [PATCH] Optimize select/poll by putting small data sets on the stack resulted in the poll stack being 4-byte aligned on 64-bit architectures, causing misaligned accesses to elements in the array. This patch fixes it by declaring the stack in terms of 'long' instead of 'char'. Force alignment of poll and select stacks to long to avoid unaligned access on 64 bit architectures. Signed-off-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: fix ata_xfer_tbl termination [PATCH] libata: make ata_qc_issue complete failed qcs [PATCH] libata: fix ata_qc_issue failure path [PATCH] ata_piix: fix ich6/m_map_db [libata] ahci: add ATI SB600 PCI IDs
-
David Howells authored
The attached patch documents the Linux kernel's memory barriers. I've updated it from the comments I've been given. The per-arch notes sections are gone because it's clear that there are so many exceptions, that it's not worth having them. I've added a list of references to other documents. I've tried to get rid of the concept of memory accesses appearing on the bus; what matters is apparent behaviour with respect to other observers in the system. Interrupts barrier effects are now considered to be non-existent. They may be there, but you may not rely on them. I've added a couple of definition sections at the top of the document: one to specify the minimum execution model that may be assumed, the other to specify what this document refers to by the term "memory". I've made greater mention of the use of mmiowb(). I've adjusted the way in which caches are described, and described the fun that can be had with cache coherence maintenance being unordered and data dependency not being necessarily implicit. I've described (smp_)read_barrier_depends(). I've rearranged the order of the sections, so that memory barriers are discussed in abstract first, and then described the memory barrier facilities available on Linux, before going on to more real-world discussions and examples. I've added information about the lack of memory barriering effects with atomic ops and bitops. I've added information about control dependencies. I've added more diagrams to illustrate caching interactions between CPUs. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Kirill Korotaev authored
Wrong error path in dup_fd() - it should return NULL on error, not an address of already freed memory :/ Triggered by OpenVZ stress test suite. What is interesting is that it was causing different oopses in RCU like below: Call Trace: [<c013492c>] rcu_do_batch+0x2c/0x80 [<c0134bdd>] rcu_process_callbacks+0x3d/0x70 [<c0126cf3>] tasklet_action+0x73/0xe0 [<c01269aa>] __do_softirq+0x10a/0x130 [<c01058ff>] do_softirq+0x4f/0x60 ======================= [<c0113817>] smp_apic_timer_interrupt+0x77/0x110 [<c0103b54>] apic_timer_interrupt+0x1c/0x24 Code: Bad EIP value. <0>Kernel panic - not syncing: Fatal exception in interrupt Signed-Off-By:
Pavel Emelianov <xemul@sw.ru> Signed-Off-By:
Dmitry Mishin <dim@openvz.org> Signed-Off-By:
Kirill Korotaev <dev@openvz.org> Signed-Off-By:
-
Nicolas Pitre authored
Turn some macros into inline functions and add proper type checking as well as being more readable. Also a minor comment adjustment. Signed-off-by:
Nicolas Pitre <nico@cam.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Jesper Juhl authored
Decrease the number of pointer derefs in drivers/serial/jsm/jsm_tty.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
"V. ANANDA KRISHNAN" <mansarov@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
As announced, lookup_hash() can now become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Adrian Bunk authored
The only user of get_wchan is the proc fs - and proc can't be built modular. Signed-off-by:
-
NeilBrown authored
Signed-off-by:
Brad Campbell <brad@wasp.net.au> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
And remove the comments that were put in inplace of a fix too.... Signed-off-by:
-
NeilBrown authored
Currently a device failure during recovery leaves bits set in the bitmap. This normally isn't a problem as the offending device will be rejected because of errors. However if device re-adding is being used with non-persistent bitmaps, this can be a problem. Signed-off-by:
-
