Add netif_addr_{lock,unlock}{,_bh}() helpers.

Use them to protect operations that operate on or read
the network device unicast and multicast address lists.

Also use them in cases where the code simply wants to
block calls into the driver's ->set_rx_mode() and
->set_multicast_list() methods.

Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used to protect the per-device unicast and multicast
address lists, as well as the callbacks into the drivers which
configure such state such as ->set_rx_mode() and ->set_multicast_list().

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are ICMP_XXX_STATS that are not used in the kernel, so I remove
them, not to "just patch" them later. But if there's some sense in
keeping them, kick me - I will remake this set keeping them.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some places, that deal with ICMP statistics already have where
to get a struct net from, but use it directly, without declaring
a separate variable on the stack.

Since I will need this net soon, I declare a struct net on the
stack and use it in the existing places in a separate patch not
to spoil the future ones.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This routine deals with ICMP statistics, but doesn't have a
struct net at hands, so add one.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove excessive comments and debugging, use NETDEV_TX codes,
remove some empty lines.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove some debugging and excessive comments, merge the two
dev_hard_header calls into one.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow to query LRO settings of underlying device when VLAN RX
acceleration is used.

Suggested by Ben Hutchings <bhutchings@solarflare.com>.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store the VLAN tag in the auxillary data/tpacket2_hdr so userspace can
properly deal with hardware VLAN tagging/stripping.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tpacket_hdr is not 64 bit clean due to use of an unsigned long
and can't be extended because the following struct sockaddr_ll needs
to be at a fixed offset.

Add support for a version 2 tpacket protocol that removes these
limitations.

Userspace can query the header size through a new getsockopt option
and change the protocol version through a setsockopt option. The
changes needed to switch to the new protocol version are:

1. replace struct tpacket_hdr by struct tpacket2_hdr
2. query header len and save
3. set protocol version to 2
 - set up ring as usual
4. for getting the sockaddr_ll, use (void *)hdr + TPACKET_ALIGN(hdrlen)
   instead of (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr))

Steps 2 and 4 can be omitted if the struct sockaddr_ll isn't needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When VLAN header stripping is used, packets currently bypass packet
sockets (and other network taps) completely. For locally existing
VLANs, they appear directly on the VLAN device, for unknown VLANs
they are silently dropped.

Add a new function netif_nit_deliver() to deliver incoming packets
to all network interface taps and use it in __vlan_hwaccel_rx() to
make VLAN packets visible on the underlying device.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a real skb member to store the skb to avoid clashes with qdiscs,
which are allowed to use the cb area themselves. As currently only real
devices that consume the skb set the NETIF_F_HW_VLAN_TX flag, no explicit
invalidation is neccessary.

The new member fills a hole on 64 bit, the skb layout changes from:

        __u32                      mark;                 /*   172     4 */
        sk_buff_data_t             transport_header;     /*   176     4 */
        sk_buff_data_t             network_header;       /*   180     4 */
        sk_buff_data_t             mac_header;           /*   184     4 */
        sk_buff_data_t             tail;                 /*   188     4 */
        /* --- cacheline 3 boundary (192 bytes) --- */
        sk_buff_data_t             end;                  /*   192     4 */

        /* XXX 4 bytes hole, try to pack */

to

        __u32                      mark;                 /*   172     4 */
        __u16                      vlan_tci;             /*   176     2 */

        /* XXX 2 bytes hole, try to pack */

        sk_buff_data_t             transport_header;     /*   180     4 */
        sk_buff_data_t             network_header;       /*   184     4 */

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch simplifies and speeds up TIPC's algorithm for identifying
on-node and off-node destinations that overlap a multicast name
sequence range.  Rather than traversing the list of all known name
publications within the cluster, it now traverses the (potentially
much shorter) list of name publications made by the node itself, and
determines if any off-node destinations exist by comparing the sizes
of the two lists.  (Since the node list must be a subset of the
cluster list, a difference in sizes means that at least one off-node
destination must exist.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensures that TIPC configuration commands that display info
about neighboring nodes and their links take the spinlocks that
protect the node list and link lists from changing while the lists
are being traversed.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensures that TIPC's multicast message name lookup
algorithm does individualized scope checking for each published
name it examines.  Previously, scope checking was only done for
the first name in a name table publication list, which could
result in incoming multicast messages being delivered to ports
publishing names with "node" scope, or not being delivered to
ports publishing names with "cluster" or "zone" scope.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch corrects many places where TIPC routines indicated
successful completion by returning TIPC_OK instead of 0.
(The TIPC_OK symbol has the value 0, but it should only be used
in contexts that deal with the error code field of a TIPC
message header.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch ensurs that accept() returns successfully even when
the newly created socket is immediately disconnected by its peer.
Previously, accept() would fail if it was unable to pass back
the optional address info for the socket's peer before the
socket became disconnected; TIPC now allows accept() to gather
peer address information after disconnection.  As a bonus, the
revised code accesses the socket's port more efficiently, without
the overhead incurred by a reference table lookup.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch eliminates an unnecessary pointer dereference when
accessing a stream-based socket's receive queue.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch eliminates an unneeded parameter when creating a low-level
TIPC port object.  Instead of returning both the pointer to the port
structure and the port's reference ID, it now returns only the pointer
since the port structure contains the reference ID as one of its fields.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@braodcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring secondary unicast addresses.  There
are 4 additional perfect match filters which can be used for
secondary unicast address support.

  *  Modified bnx2_set_mac_addr() to be more generic in handling
     the setting of the perfect match filters
  *  Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Negotiate with boot code and ASF firmware to see if it can
support keeping VLAN tags in the RX packets.  If supported
by firmware, the VLAN tag will be kept in the RX packet
unless VLAN acceleration is registered.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ack=1 means wait for firmware acknowledgement, and ack=0
means don't wait.  All current callers will set it to 1.

In the next patch, new calls will set ack=0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <Benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device may be in D3-hot state and may crash if we try to
configure the speed settings by accessing the registers.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we are trying to place the information from the kernel to
1, 2, 3 and 4 pages sequentially. These pages are allocated via slab.
Though, from the slab point of view steps 3 and 4 are equivalent on
most architectures. So, lets skip 3 pages attempt.

By the way, should we switch from .doit to .dumpit interface here?
The amount of data seems quite big for me.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes references in drivers/net/wan/Kconfig and
net/wanrouter/Kconfig to Documentation/networking/wan-router.txt
which was removed in commit 99971e70


("[WANPIPE]: Forgotten bits of Sangoma drivers removal.").

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Please see the following thread to get some context on this
	http://marc.info/?l=linux-netdev&m=121564433018903&w=2



Basically the issue is that current multi-cast filtering stuff in
the TUN/TAP driver is seriously broken.
Original patch went in without proper review and ACK. It was broken and
confusing to start with and subsequent patches broke it completely.
To give you an idea of what's broken here are some of the issues:

- Very confusing comments throughout the code that imply that the
character device is a network interface in its own right, and that packets
are passed between the two nics. Which is completely wrong.

- Wrong set of ioctls is used for setting up filters. They look like
shortcuts for manipulating state of the tun/tap network interface but
in reality manipulate the state of the TX filter.

- ioctls that were originally used for setting address of the the TX filter
got "fixed" and now set the address of the network interface itself. Which
made filter totaly useless.

- Filtering is done too late. Instead of filtering early on, to avoid
unnecessary wakeups, filtering is done in the read() call.

The list goes on and on :)

So the patch cleans all that up. It introduces simple and clean interface for
setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering
before enqueuing the packets.

TX filtering is useful in the scenarios where TAP is part of a bridge, in
which case it gets all broadcast, multicast and potentially other packets when
the bridge is learning. So for example Ethernet tunnelling app may want to
setup TX filters to avoid tunnelling multicast traffic. QEMU and other
hypervisors can push RX filtering that is currently done in the guest into the
host context therefore saving wakeups and unnecessary data transfer.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check all positive increment for promiscuity and allmulti
to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

An oops happens during device unregister.

The following oops happened when I add two tunnels, which
use a same device, and then delete one tunnel.
Obviously deleting tunnel "A" causes device unregister, which
send a notification, and after receiving notification, ipmr do
unregister again for tunnel "B" which also use same device.
That is wrong.
After receiving notification, ipmr only needs to decrease reference
count and don't do duplicated unregister.
Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean.

This patch fixs:
- unregister device oops
- using after dev_put()

Here is the oops:
===
Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------
Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651!
Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1] 
Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Jul 11 15:39:29 wangchen kernel: 
Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69)
Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0
Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3
Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff
Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c
Jul 11 15:39:29 wangchen kernel:  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000)
Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360 
Jul 11 15:39:29 wangchen kernel:        c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000 
Jul 11 15:39:29 wangchen kernel:        00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000 
Jul 11 15:39:29 wangchen kernel: Call Trace:
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0284e4c>] ipmr_device_event+0x1e/0x30
Jul 11 15:39:29 wangchen kernel:  [<c029a819>] notifier_call_chain+0x2a/0x47
Jul 11 15:39:29 wangchen kernel:  [<c012841b>] raw_notifier_call_chain+0x9/0xc
Jul 11 15:39:29 wangchen kernel:  [<c024639f>] rollback_registered+0x95/0xe3
Jul 11 15:39:29 wangchen kernel:  [<c024641c>] unregister_netdevice+0x2f/0x51
Jul 11 15:39:29 wangchen kernel:  [<c0284e1a>] vif_delete+0xaf/0xc3
Jul 11 15:39:29 wangchen kernel:  [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c01727c4>] __find_get_block_slow+0xda/0xe4
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<c0172a7f>] __find_get_block+0xf8/0x122
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<c0263501>] ip_setsockopt+0xa9/0x9ee
Jul 11 15:39:29 wangchen kernel:  [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c0116434>] __wake_up+0xf/0x15
Jul 11 15:39:29 wangchen kernel:  [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd]
Jul 11 15:39:29 wangchen kernel:  [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3]
Jul 11 15:39:29 wangchen kernel:  [<c014291e>] get_page_from_freelist+0x94/0x369
Jul 11 15:39:29 wangchen kernel:  [<c01408f2>] filemap_fault+0x1ac/0x2fe
Jul 11 15:39:29 wangchen kernel:  [<c01a605e>] security_sk_alloc+0xd/0xf
Jul 11 15:39:29 wangchen kernel:  [<c023edea>] sk_prot_alloc+0x36/0x78
Jul 11 15:39:29 wangchen kernel:  [<c0240037>] sk_alloc+0x3a/0x40
Jul 11 15:39:29 wangchen kernel:  [<c0276062>] raw_hash_sk+0x46/0x4e
Jul 11 15:39:29 wangchen kernel:  [<c0166aff>] d_alloc+0x1b/0x157
Jul 11 15:39:29 wangchen kernel:  [<c023e4d1>] sock_common_setsockopt+0x12/0x16
Jul 11 15:39:29 wangchen kernel:  [<c023cb1e>] sys_setsockopt+0x6f/0x8e
Jul 11 15:39:29 wangchen kernel:  [<c023e105>] sys_socketcall+0x15c/0x19e
Jul 11 15:39:29 wangchen kernel:  [<c0103611>] sysenter_past_esp+0x6a/0x99
Jul 11 15:39:29 wangchen kernel:  [<c0290000>] unix_poll+0x69/0x78
Jul 11 15:39:29 wangchen kernel:  =======================
Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0 
Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c
Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]---
===

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Patrick McHardy pointed it out.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

Here, we check the positive increment for allmulti to get error return.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>