- Oct 06, 2022
-
-
Bjorn Helgaas authored
- List platforms that use a single MSI host interrupt in qcom DT (Johan Hovold) - Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold) - Make all optional clocks truly optional in the driver (Johan Hovold) - Rename per-IP structs to reflect the IP version (Johan Hovold) - Sort device ID match table by compatible string (Johan Hovold) - Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov) - Drop the unused .post_deinit() callback (Johan Hovold) - Rely on DT for clock information instead of hard-coding it in the driver (Manivannan Sadhasivam) - Disable IRQs when removing driver to avoid spurious IRQs later (Manivannan Sadhasivam) - Expose link transition counts via debugfs to help debug issues with low-power states (Manivannan Sadhasivam) - Gate Master AXI clock to the MHI bus while in L1 substates to save power (Manivannan Sadhasivam) - Disable Master AXI clock to save power when there is no traffic on PCIe (Manivannan Sadhasivam) - Make the "PERST separation" debug feature optional in the DT and the driver (Manivannan Sadhasivam) - Define clocks to be per-platform in DT to prepare for future SoCs (Manivannan Sadhasivam) - Add SM8450 SoC support (Manivannan Sadhasivam) - Check for platform_get_resource_byname() to avoid a NULL pointer dereference (Yang Yingliang) * pci/qcom: PCI: qcom-ep: Check platform_get_resource_byname() return value PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Define clocks per platform PCI: qcom-ep: Make PERST separation optional dt-bindings: PCI: qcom-ep: Make PERST separation optional PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS PCI: qcom-ep: Expose link transition counts via debugfs PCI: qcom-ep: Disable IRQs during driver remove PCI: qcom-ep: Make use of the cached dev pointer PCI: qcom-ep: Rely on the clocks supplied by devicetree PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure PCI: qcom: Rename host-init error label PCI: qcom: Drop unused post_deinit callback PCI: qcom-ep: Add MODULE_DEVICE_TABLE PCI: qcom: Sort device-id table PCI: qcom: Clean up IP configurations PCI: qcom: Make all optional clocks optional PCI: qcom: Add support for SA8540P PCI: qcom: Add support for SC8280XP dt-bindings: PCI: qcom: Add SA8540P to binding dt-bindings: PCI: qcom: Add SC8280XP to binding dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
-
Bjorn Helgaas authored
- Fix endianness of emulated bridge iolimitupper, iobaseupper, memlimit and membase members (Pali Rohár) * remotes/lorenzo/pci/mvebu: PCI: mvebu: Fix endianness when accessing PCI emul bridge members
-
Bjorn Helgaas authored
- Rename the pcie-mediatek-gen3 driver from 'mtk-pcie' to 'mtk-pcie-gen3' so it can coexist with the pcie-mediatek driver, which also uses 'mtk-pcie' (Felix Fietkau) * remotes/lorenzo/pci/mediatek: PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
-
Bjorn Helgaas authored
- Use dmam_alloc_coherent() instead of dma_map_page() to allocate the MSI target page, which means dwc drivers will work even when ZONE_DMA32 is disabled (Will McVicker) - If we can't allocate an MSI target page with a 32-bit address, try allocating one with a 64-bit address (Will McVicker) - Switch from of_gpio_named_count() to generic gpiod_count() (Andy Shevchenko) - Add support for i.MX8MP PCIe (Richard Zhu) - Fix the Freescale i.MX8 PHY driver, which had interchanged the phy_init() and phy_power_on() interfaces (Richard Zhu) * remotes/lorenzo/pci/dwc: phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() PCI: imx6: Add i.MX8MP PCIe support PCI: dwc: Replace of_gpio_named_count() by gpiod_count() PCI: dwc: Drop dependency on ZONE_DMA32
-
Bjorn Helgaas authored
- Add MT8188 and MT8195 to mediatek-gen3 DT binding (Jianjun Wang) - Add 'clock-names' back to fu740 DT binding (Conor Dooley) - Add 'clocks', 'clock-names', 'dma-ranges' to microchip DT binding (Conor Dooley) - Add 'aggre0' and 'aggre1' clocks to qcom DT binding (Krishna chaitanya chundru) * remotes/lorenzo/pci/dt: dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks dt-bindings: PCI: microchip,pcie-host: fix missing dma-ranges dt-bindings: PCI: microchip,pcie-host: fix missing clocks properties dt-bindings: PCI: fu740-pci: fix missing clock-names dt-bindings: PCI: mediatek-gen3: Add support for MT8188 and MT8195
-
Bjorn Helgaas authored
- In an emulated PCI bridge, set Capability offsets so they match the hardware offsets shown by U-Boot (Pali Rohár) * remotes/lorenzo/pci/bridge-emul: PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
-
Bjorn Helgaas authored
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry Torokhov) * remotes/lorenzo/pci/apple: PCI: apple: Do not leak reset GPIO on unbind/unload/error
-
Bjorn Helgaas authored
- Emulate the PCI Bridge Subsystem Vendor ID (Pali Rohár) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge
-
Bjorn Helgaas authored
- Distribute resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work (Mika Westerberg) - Fix the "revert to firmware assignment" code so we do the revert only if the address is actually reachable. Previously we sometimes assigned addresses that could not be reached via upstream bridges (Maciej W. Rozycki) * pci/resource: PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge PCI: Fix typo in pci_scan_child_bus_extend() PCI: Fix whitespace and indentation PCI: Distribute available resources for root buses, too PCI: Move pci_assign_unassigned_root_bus_resources() PCI: Pass available buses even if the bridge is already configured PCI: Fix used_buses calculation in pci_scan_child_bus_extend()
-
Bjorn Helgaas authored
- Expose a sysfs interface for configuring Resizable BARs so we can resize BARs before assigning devices to a VM through VFIO (Alex Williamson) * pci/rebar: PCI: Expose PCIe Resizable BAR support via sysfs
-
Bjorn Helgaas authored
- Cache the PTM capability offset instead of searching for it every time (Bjorn Helgaas) - Separate PTM configuration from PTM enable (Bjorn Helgaas) - Add pci_suspend_ptm() and pci_resume_ptm() to disable and re-enable PTM on suspend/resume so some Root Ports can safely enter a lower-power PM state (Bjorn Helgaas) - Disable PTM for all devices during suspend; previously we only did this for Root Ports and even then only in certain cases (Bjorn Helgaas) - Simplify pci_pm_suspend_noirq() (Rajvi Jingar) - Reduce the delay after transitions to/from D3hot by using usleep_range() instead of msleep(), which reduces the typical delay from 19ms to 10ms (Sajid Dalvi, Will McVicker) * pci/pm: PCI/PM: Reduce D3hot delay with usleep_range() PCI/PM: Simplify pci_pm_suspend_noirq() PCI/PM: Always disable PTM for all devices during suspend PCI/PTM: Consolidate PTM interface declarations PCI/PTM: Reorder functions in logical order PCI/PTM: Preserve RsvdP bits in PTM Con...
-
Bjorn Helgaas authored
- Correct a typo in 71020a3c ('PCI/MSI: Use msi_add_msi_desc()') that reversed the sense of 'can_mask' in msi_add_msi_desc() (Josef Johansson) * pci/msi: PCI/MSI: Correct 'can_mask' test in msi_add_msi_desc()
-
Bjorn Helgaas authored
- Work around a BIOS defect that makes some Intel Root Ports report an RP PIO log size of zero (Mika Westerberg) * pci/dpc: PCI/DPC: Quirk PIO log size for certain Intel Root Ports
-
Bjorn Helgaas authored
- Save L1 PM Substates Capability across suspend/resume so L1SS keeps working after resume (Vidya Sagar) - If device lacks L1 PM Substates Capability, don't read junk and treat it as such a Capability (Bjorn Helgaas) - Fix the LTR_L1.2_THRESHOLD computation, which previously configured the threshold for entering L1.2 to be lower than intended, so L1.2 could be used when it shouldn't be (Bjorn Helgaas) * pci/aspm: PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation PCI/ASPM: Ignore L1 PM Substates if device lacks capability PCI/ASPM: Factor out L1 PM Substates configuration PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI/ASPM: Refactor L1 PM Substates Control Register programming
-
Yang Yingliang authored
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL pointer, which causes a NULL pointer dereference when it is used in qcom_pcie_perst_deassert(). Check the return value to prevent it. Link: https://lore.kernel.org/r/20220429080740.1294797-1-yangyingliang@huawei.com Fixes: f55fee56 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com>
-
Manivannan Sadhasivam authored
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller driver. The driver uses the same config as the existing SDX55 chipset, so additional settings are not required. Link: https://lore.kernel.org/r/20220914075350.7992-13-manivannan.sadhasivam@linaro.org Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Manivannan Sadhasivam authored
Add devicetree bindings support for SM8450 SoC. Only the clocks are different on this platform, rest is same as SDX55. Link: https://lore.kernel.org/r/20220914075350.7992-12-manivannan.sadhasivam@linaro.org Signed-off-by:
Rob Herring <robh@kernel.org>
-
Manivannan Sadhasivam authored
In preparation for adding the bindings for future SoCs, define the clocks per platform. Link: https://lore.kernel.org/r/20220914075350.7992-11-manivannan.sadhasivam@linaro.org Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-
Manivannan Sadhasivam authored
PERST separation is an optional debug feature used to collect the crash dump from the PCIe endpoint devices by the PCIe host when the endpoint crashes. This feature keeps the PCIe link up by separating the PCIe IP block from the SoC reset logic. Make the property optional in the driver. Link: https://lore.kernel.org/r/20220914075350.7992-10-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
PERST separation is an optional debug feature used to collect the crash dump from the PCIe endpoint devices by the PCIe host when the endpoint crashes. This feature keeps the PCIe link up by separating the PCIe IP block from the SoC reset logic. Remove the corresponding property "qcom,perst-regs" from the required properties list. Link: https://lore.kernel.org/r/20220914075350.7992-9-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
The Master AXI clock can be disabled when it is not used i.e., when there is no traffic on the PCIe bus. This helps to save power during idle state. [bhelgaas: tidy and wrap comment] Link: https://lore.kernel.org/r/20220914075350.7992-8-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Alex Williamson authored
Add a simple sysfs interface to Resizable BAR support, largely for the purposes of assigning such devices to a VM through VFIO. Resizable BARs present a difficult feature to expose to a VM through emulation, as resizing a BAR is done on the host. It can fail, and often does, but we have no means via emulation of a PCIe REBAR capability to handle the error cases. A vfio-pci specific ioctl interface is also cumbersome as there are often multiple devices within the same bridge aperture and handling them is a challenge. In the interface proposed here, expanding a BAR potentially requires such devices to be soft-removed during the resize operation and rescanned after, in order for all the necessary resources to be released. A pci-sysfs interface is also more universal than a vfio specific interface. Please see the ABI documentation update for usage. Link: https://lore.kernel.org/r/166336088796.3597940.14973499936692558556.stgit@omen Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: Krzysztof Wilczyński <kw@linux.com>
-
Bjorn Helgaas authored
80d7d7a9 ("PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics") replaced a fixed value (163840ns) with one computed from T_POWER_OFF, Common_Mode_Restore_Time, etc., but it encoded the LTR_L1.2_THRESHOLD value incorrectly. This is especially a problem for small thresholds, e.g., 63ns fell into the "threshold_ns < 1024" case and was encoded as 32ns: LTR_L1.2_THRESHOLD_Scale = 1 (multiplier is 32ns) LTR_L1.2_THRESHOLD_Value = 63 >> 5 = 1 LTR_L1.2_THRESHOLD = multiplier * value = 32ns * 1 = 32ns Correct the algorithm to encode all times of 1023ns (0x3ff) or smaller exactly and larger times conservatively (the encoded threshold is never smaller than was requested). This reduces the chance of entering L1.2 when the device can't tolerate the exit latency. Fixes: 80d7d7a9 ("PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics") Link: https://lore.kernel.org/r/20221005025809.2247547-4-helgaas@kernel.org Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
-
Bjorn Helgaas authored
187f91db ("PCI/ASPM: Remove struct aspm_register_info.l1ss_cap") inadvertently removed a check for existence of the L1 PM Substates (L1SS) Capability before reading it. If there is no L1SS Capability, this means we mistakenly read PCI_COMMAND and PCI_STATUS (config address 0x04) and interpret that as the PCI_L1SS_CAP register, so we may incorrectly configure L1SS. Make sure the L1SS Capability exists before trying to read it. Fixes: 187f91db ("PCI/ASPM: Remove struct aspm_register_info.l1ss_cap") Link: https://lore.kernel.org/r/20221005025809.2247547-3-helgaas@kernel.org Signed-off-by:
-
Bjorn Helgaas authored
Move L1 PM Substates configuration from pcie_aspm_cap_init() to a new aspm_l1ss_init() function. No functional change intended. Link: https://lore.kernel.org/r/20221005025809.2247547-2-helgaas@kernel.org Signed-off-by:
-
- Oct 05, 2022
-
-
Manivannan Sadhasivam authored
During L1SS, gate the Master clock supplied to the MHI bus to save power. Link: https://lore.kernel.org/r/20220914075350.7992-7-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
Qualcomm PCIe controllers have debug registers in the MMIO region that count PCIe link transitions. Expose them over debugfs to userspace to help debug the low power issues. Link: https://lore.kernel.org/r/20220914075350.7992-6-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
Disable the Global and PERST IRQs during driver remove to avoid getting spurious IRQs after resource deallocation. Link: https://lore.kernel.org/r/20220914075350.7992-5-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Vidya Sagar authored
Previously the L1 PM Substates Control Registers (CTL1 and CTL2) weren't saved and restored during suspend/resume leading to the L1 PM Substates configuration being lost post-resume. Save the L1 PM Substates Control Registers so that the configuration is retained post-resume. [bhelgaas: drop pci_is_pcie() testing; we can rely on pci_configure_ltr() having already done that] Link: https://lore.kernel.org/r/20220913131822.16557-3-vidyas@nvidia.com Signed-off-by:
Vidya Sagar <vidyas@nvidia.com> Signed-off-by:
-
Vidya Sagar authored
Refactor the code to extract the common code to program Control Registers 1 and 2 of the L1 PM Substates capability to a new function aspm_program_l1ss() and call it for both parent and child devices. [bhelgaas: squash in update to preserve fields we're not updating from https://lore.kernel.org/r/36fa13c5-e0f8-022f-77f7-7908e4df98b8@nvidia.com] Link: https://lore.kernel.org/r/20220913131822.16557-2-vidyas@nvidia.com Signed-off-by:
-
- Oct 03, 2022
-
-
Manivannan Sadhasivam authored
In the qcom_pcie_ep_get_resources() function, dev pointer is already cached in a local variable. So let's make use of it instead of getting the dev pointer again from pdev struct. Link: https://lore.kernel.org/r/20220914075350.7992-4-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
Generally, device drivers should just rely on the platform data like devicetree to supply the clocks required for the functioning of the peripheral. There is no need to hardcode the clk info in the driver. So get rid of the static clk info and obtain the platform supplied clks. The total number of clocks supplied is obtained using the devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs. Link: https://lore.kernel.org/r/20220914075350.7992-3-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Manivannan Sadhasivam authored
Add kernel-doc for qcom_pcie_ep structure. Link: https://lore.kernel.org/r/20220914075350.7992-2-manivannan.sadhasivam@linaro.org Signed-off-by:
-
Richard Zhu authored
Refer to phy_core driver, phy_init() must be called before phy_power_on(). Fix the wrong order of phy_init() and phy_power_on() here. Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com Fixes: 1aa97b00 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Tested-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Acked-by:
-
Richard Zhu authored
Add i.MX8MP PCIe support. To avoid codes duplication when find the syscon regmap, add the iomux gpr syscon compatible into drvdata. Link: https://lore.kernel.org/r/1662109086-15881-8-git-send-email-hongxing.zhu@nxp.com Tested-by:
Marek Vasut <marex@denx.de> Tested-by:
Richard Leitner <richard.leitner@skidata.com> Tested-by:
Lucas Stach <l.stach@pengutronix.de>
-
Andy Shevchenko authored
As a preparation to unexport of_gpio_named_count(), convert the driver to use gpiod_count() instead. Link: https://lore.kernel.org/r/20220830183310.48541-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- Sep 30, 2022
-
-
Sajid Dalvi authored
PCIe r6.0, sec 5.9, requires a 10ms delay between programming a device to change to or from D3hot and the time the device is next accessed (unless Readiness Notifications are used). The 10ms value (PCI_PM_D3HOT_WAIT) doesn't appear directly here because some chipsets require 120ms for devices *below* them (pci_pm_d3hot_delay) and some devices require more or less than 10ms (dev->d3hot_delay). But msleep(10) typically waits about *20*ms, which is more than we need. Switch to usleep_range() to improve the delay accuracy. Based on a commit from Sajid in the Pixel 6 kernel tree [1]. On a Pixel 6, the 10ms delay for the Exynos PCIe device delayed for an average of 19ms. Switching to usleep_range() decreased the resume time by about 9ms. [1] https://android.googlesource.com/kernel/gs/+/18a8cad68d8e6d50f339a716a18295e6d987cee3 [bhelgaas commit log, add timers-howto.rst link] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/timers/timers-howto.rst?id=v5.19#n73 Link: https://lore.kernel.org/r/20220921212735.2131588-1-willmcvicker@google.com Signed-off-by:
Sajid Dalvi <sdalvi@google.com> Signed-off-by:
Will McVicker <willmcvicker@google.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org>
-
- Sep 29, 2022
-
-
Johan Hovold authored
Use a more descriptive name for the reset host-init error label for consistency. Link: https://lore.kernel.org/r/20220928155421.21660-3-johan+linaro@kernel.org Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
-
Johan Hovold authored
Drop the unused and confusingly named post_deinit callback that was added for the now removed pipe clock handling. If ever needed we can add back a callback named pre_deinit (or perhaps rather pre_phy_power_off) instead. Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org Signed-off-by:
-
- Sep 28, 2022
-
-
Mika Westerberg authored
Some Root Ports on Intel Tiger Lake and Alder Lake systems support the RP Extensions for DPC and the RP PIO Log registers but incorrectly advertise an RP PIO Log Size of zero. This means the kernel complains that: DPC: RP PIO log size 0 is invalid and if DPC is triggered, the DPC driver will not dump the RP PIO Log registers when it should. This is caused by a BIOS bug and should be fixed the BIOS for future CPUs. Add a quirk to set the correct RP PIO Log size for the affected Root Ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=209943 Link: https://lore.kernel.org/r/20220816102042.69125-1-mika.westerberg@linux.intel.com Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
