The IRQ output of the bcm bt-device is really a level IRQ signal, which
signals a logical high as long as the device's buffer contains data. Since
the draining in the buffer is done in the tty driver, we cannot (easily)
wait in a threaded interrupt handler for the draining, after which the
IRQ should go low again.

So instead we treat the IRQ as an edge interrupt. This opens the window
for a theoretical race where we wakeup, read some data and then autosuspend
*before* the IRQ has gone (logical) low, followed by the device just at
that moment receiving more data, causing the IRQ to stay high and we never
see an edge.

Since we call pm_runtime_mark_last_busy() on every received byte, there
should be plenty time for the IRQ to go (logical) low before we ever
suspend, so this should never happen, but after commit 43fff768


("Bluetooth: hci_bcm: Streamline runtime PM code"), which has been reverted
since, this was actually happening causing the device to get stuck in
runtime suspend.

The bcm bt-device actually has a workaround for this, if we set the
pulsed_host_wake flag in the sleep parameters, then the device monitors
if the host is draining the buffer and if not then after a timeout the
device will pulse the IRQ line, causing us to see an edge, fixing the
stuck in suspend condition.

This commit sets the pulsed_host_wake flag to fix the (mostly theoretical)
race caused by us treating the IRQ as an edge IRQ.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This reverts commit 43fff768

 ("Bluetooth: hci_bcm: Streamline runtime
PM code"). The commit msg for this commit states "No functional change
intended.", but replacing:

 pm_runtime_get();
 pm_runtime_mark_last_busy();
 pm_runtime_put_autosuspend();

with:

 pm_request_resume();

Does result in a functional change, pm_request_resume() only calls
pm_runtime_mark_last_busy() if the device was suspended before the call.

This results in the following happening:

1) Device is runtime suspended
2) Device drives host_wake IRQ logically high as it starts receiving data
3) bcm_host_wake() gets called, causes the device to runtime-resume,
   current time gets marked as last_busy time
4) After 5 seconds the autosuspend timer expires and the dev autosuspends
   as no one has been calling pm_runtime_mark_last_busy(), the device was
   resumed during those 5 seconds, so all the pm_request_resume() calls
   while receiving data and/or bcm_host_wake() calls were nops
5) If 4) happens while the device has (just received) data in its buffer to
   be read by the host the IRQ line is *already* / still logically high
   when we autosuspend and since we use an edge triggered IRQ, the IRQ
   will never trigger, causing the device to get stuck in suspend

Therefor this commit has to be reverted, so that we avoid the device
getting stuck in suspend.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The Atheros 1525/QCA6174 BT doesn't seem working properly on the
recent kernels, as it tries to load a wrong firmware
ar3k/AthrBT_0x00000200.dfu and it fails.

This seems to have been a problem for some time, and the known
workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012.

The device in question is:

T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P: Vendor=0cf3 ProdID=3004 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504


Reported-by: Ivan Levshin <ivan.levshin@microfocus.com>
Tested-by: Ivan Levshin <ivan.levshin@microfocus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Closing of a listen socket wakes up kernel_accept() of
smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker()
gives up the internal clcsock. The wait logic introduced with
commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker")
might wait longer than necessary. This patch implements the idea to
implement the wait just with flush_work(), and gets rid of the extra
smc_close_wait_listen_clcsock() function.

Fixes: 127f4970

 ("net/smc: release clcsock from tcp_listen_worker")
Reported-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the
sunvnet driver does not support GSO for sctp.  Here we remove the
NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO
instead.

Signed-off-by: Cathy Zhou <Cathy.Zhou@Oracle.COM>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.16-20180314' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can



Marc Kleine-Budde says:

====================
pull-request: can 2018-03-14

this is a pull request of two patches for net/master.

Both patches are by Andri Yngvason and fix problems in the cc770 driver,
that show up quite fast on RT systems, but also on non RT setups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The problem was introduced in commit
506b0a39 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs
because tp->lock spinlock is held which is obtained in tg3_start
by way of tg3_full_lock(), line 11571. The documentation for usleep_range()
specifically states it cannot be used inside a spinlock.

Fixes: 506b0a39

 ("[netdrv] tg3: APE heartbeat changes")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to the rework of PMTU information storage in commit
2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.

Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.

This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().

One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.

Fixes: 2c8cec5c

 ("ipv4: Cache learned PMTU information in inetpeer.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin Bucur says:

====================
DPAA Ethernet fixes

This patch set is addressing several issues in the DPAA Ethernet
driver suite:

 - module unload crash caused by wrong reference to device being left
   in the cleanup code after the DSA related changes
 - scheduling wile atomic bug in QMan code revealed during dpaa_eth
   module unload
 - a couple of error counter fixes, a duplicated init in dpaa_eth.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The tx_errors counter is incremented by the dpaa_xmit caller.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fd_format has already been initialized at this point.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent changes that make the driver probing compatible with DSA
were not propagated in the dpa_remove() function, breaking the
module unload function. Using the proper device to address the issue.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()

Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()

Also add the const qualifier to sock_cgroup_classid() for consistency.

Fixes: ca6fb065

 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While waiting for the TX object to send an RTR, an external message with a
matching id can overwrite the TX data. In this case we must call the rx
routine and then try transmitting the message that was overwritten again.

The queue was being stalled because the RX event did not generate an
interrupt to wake up the queue again and the TX event did not happen
because the TXRQST flag is reset by the chip when new data is received.

According to the CC770 datasheet the id of a message object should not be
changed while the MSGVAL bit is set. This has been fixed by resetting the
MSGVAL bit before modifying the object in the transmit function and setting
it after. It is not enough to set & reset CPUUPD.

It is important to keep the MSGVAL bit reset while the message object is
being modified. Otherwise, during RTR transmission, a frame with matching
id could trigger an rx-interrupt, which would cause a race condition
between the interrupt routine and the transmit function.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Tested-by: Richard Weinberger <richard@nod.at>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This has been reported to cause stalls on rt-linux.

Suggested-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line
before in qed_rdma_resc_free(p_hwfn).

Fixes: 9de506a5

 ("qed: Free RoCE ILT Memory on rmmod qedr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2018-03-13

1) Refuse to insert 32 bit userspace socket policies on 64
   bit systems like we do it for standard policies. We don't
   have a compat layer, so inserting socket policies from
   32 bit userspace will lead to a broken configuration.

2) Make the policy hold queue work without the flowcache.
   Dummy bundles are not chached anymore, so we need to
   generate a new one on each lookup as long as the SAs
   are not yet in place.

3) Fix the validation of the esn replay attribute. The
   The sanity check in verify_replay() is bypassed if
   the XFRM_STATE_ESN flag is not set. Fix this by doing
   the sanity check uncoditionally.
   From Florian Westphal.

4) After most of the dst_entry garbage collection code
   is removed, we may leak xfrm_dst entries as they are
   neither cached nor tracked somewhere. Fix this by
   reusing the 'uncached_list' to track xfrm_dst entries
   too. From Xin Long.

5) Fix a rcu_read_lock/rcu_read_unlock imbalance in
   xfrm_get_tos() From Xin Long.

6) Fix an infinite loop in xfrm_get_dst_nexthop. On
   transport mode we fetch the child dst_entry after
   we continue, so this pointer is never updated.
   Fix this by fetching it before we continue.

7) Fix ESN sequence number gap after IPsec GSO packets.
    We accidentally increment the sequence number counter
    on the xfrm_state by one packet too much in the ESN
    case. Fix this by setting the sequence number to the
    correct value.

8) Reset the ethernet protocol after decapsulation only if a
   mac header was set. Otherwise it breaks configurations
   with TUN devices. From Yossi Kuperman.

9) Fix __this_cpu_read() usage in preemptible code. Use
   this_cpu_read() instead in ipcomp_alloc_tfms().
   From Greg Hackmann.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

f7c83bcb ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().

At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues.  3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context.  On 3.15 and later, we
need to use this_cpu_read() instead.

syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:

BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101
caller is ipcomp_init_state+0x185/0x990
CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779 #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 dump_stack+0xb9/0x115
 check_preemption_disabled+0x1cb/0x1f0
 ipcomp_init_state+0x185/0x990
 ? __xfrm_init_state+0x876/0xc20
 ? lock_downgrade+0x5e0...

During the conversion to dsa_is_user_port(), a condition ended up being
reversed, which would prevent the creation of any user port when using
the legacy binding and/or platform data, fix that.

Fixes: 4a5b85ff

 ("net: dsa: use dsa_is_user_port everywhere")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-03-12

This series contains fixes to e1000e only.

Benjamin Poirier provides two fixes, first reverts commits that changed
what happens to the link status when there is an error.  These commits
were to resolve a race condition, but in the process of fixing the race
condition, they changed the behavior when an error occurred.  Second fix
resolves a race condition by not setting "get_link_status" to false
after checking the link.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
l2tp: fix races with ipv4-mapped ipv6 addresses

The syzbot reported an l2tp oops that uncovered some races in the l2tp xmit
path and a partially related issue in the generic ipv6 code.

We need to address them separately.

v1 -> v2:
 - add missing fixes tag in patch 1
 - fix several issues in patch 2

v2 -> v3:
 - dropped some unneeded chunks in patch 2
====================

Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.

If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:

BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448

CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x24d lib/dump_stack.c:53
  print_address_description+0x73/0x250 mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report+0x23c/0x360 mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  ip6_dst_idev include/net/ip6_fib.h:192 [inline]
  ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline]
  l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148
  pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046
  __sys_sendmsg+0xe5/0x210 net/socket.c:2080
  SYSC_sendmsg net/socket.c:2091 [inline]
  SyS_sendmsg+0x2d/0x50 net/socket.c:2087
  do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x453e69
RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69
RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000

This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
  explicitly invoking ipv6_addr_v4mapped() instead

The issue is apparently there since ancient times.

v1 -> v2: (many thanks to Guillaume)
 - with csum issue introduced in v1
 - replace pr_err with pr_debug
 - fix build issue with IPV6 disabled
 - move l2tp_sk_is_v4mapped in l2tp_core.c

v2 -> v3:
 - don't update inet_daddr for v4mapped address, unneeded
 - drop rendundant check at creation time

Reported-and-tested-by:  <syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com>
Fixes: 3557baab

 ("[L2TP]: PPP over L2TP driver core")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.

If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.

Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.

v1 -> v2:
 - added missing Fixes tag

Fixes: 85cb73ff

 ("net: ipv6: reset daddr and dport in sk if connect() fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex reported the following race condition:

/* link goes up... interrupt... schedule watchdog */
\ e1000_watchdog_task
	\ e1000e_has_link
		\ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link
			\ e1000e_phy_has_link_generic(..., &link)
				link = true

					 /* link goes down... interrupt */
					 \ e1000_msix_other
						 hw->mac.get_link_status = true

			/* link is up */
			mac->get_link_status = false

		link_active = true
		/* link_active is true, wrongly, and stays so because
		 * get_link_status is false */

Avoid this problem by making sure that we don't set get_link_status = false
after having checked the link.

It seems this problem has been present since the introduction of e1000e.

Link: https://lkml.org/lkml/2018/1/29/338


Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This reverts commit 19110cfb.
This reverts commit 4110e02e.
This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98.

Commit 19110cfb ("e1000e: Separate signaling for link check/link up")
changed what happens to the link status when there is an error which
happens after "get_link_status = false" in the copper check_for_link
callbacks. Previously, such an error would be ignored and the link
considered up. After that commit, any error implies that the link is down.

Revert commit 19110cfb ("e1000e: Separate signaling for link check/link
up") and its followups. After reverting, the race condition described in
the log of commit 19110cfb is reintroduced. It may still be triggered
by LSC events but this should keep the link down in case the link is
electrically unstable, as discussed. The race may no longer be
triggered by RXO events because commit 4aea7a5c ("e1000e: Avoid
receiver overrun interrupt bursts") restored reading icr in the Other
handler.

Link: https://lkml.org/lkml/2018/3/1/789


Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree, they are:

1) Fixed hashtable representation doesn't support timeout flag, skip it
   otherwise rules to add elements from the packet fail bogusly fail with
   EOPNOTSUPP.

2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel,
   patch from Florian Westphal.

3) Sanitize proc names in several x_tables extensions, also from Florian.

4) Add sanitization to ebt_among wormhash logic, from Florian.

5) Missing release of hook array in flowtable.
====================

Merge tag 'linux-can-fixes-for-4.16-20180312' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can



Marc Kleine-Budde says:

====================
pull-request: can 2018-03-12

this is a pull reqeust of 6 patches for net/master.

The first patch is by Wolfram Sang and fixes a bitshift vs. comparison mistake
in the m_can driver. Two patches of Marek Vasut repair the error handling in
the ifi driver. The two patches by Stephane Grosjean fix a "echo_skb is
occupied!" bug in the peak/pcie_fd driver. Bich HEMON's patch adds pinctrl
select state calls to the m_can's driver to further improve power saving during
suspend.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Now when using 'ss' in iproute, kernel would try to load all _diag
modules, which also causes corresponding family and proto modules
to be loaded as well due to module dependencies.

Like after running 'ss', sctp, dccp, af_packet (if it works as a module)
would be loaded.

For example:

  $ lsmod|grep sctp
  $ ss
  $ lsmod|grep sctp
  sctp_diag              16384  0
  sctp                  323584  5 sctp_diag
  inet_diag              24576  4 raw_diag,tcp_diag,sctp_diag,udp_diag
  libcrc32c              16384  3 nf_conntrack,nf_nat,sctp

As these family and proto modules are loaded unintentionally, it
could cause some problems, like:

- Some debug tools use 'ss' to collect the socket info, which loads all
  those diag and family and protocol modules. It's noisy for identifying
  issues.

- Users usually expect to drop sctp init packet silently when they
  have no sense of sctp protocol instead of sending abort back.

- It wastes resources (especially with multiple netns), and SCTP module
  can't be unloaded once it's loaded.

...

In short, it's really inappropriate to have these family and proto
modules loaded unexpectedly when just doing debugging with inet_diag.

This patch is to introduce sock_load_diag_module() where it loads
the _diag module only when it's corresponding family or proto has
been already registered.

Note that we can't just load _diag module without the family or
proto loaded, as some symbols used in _diag module are from the
family or proto module.

v1->v2:
  - move inet proto check to inet_diag to avoid a compiling err.
v2->v3:
  - define sock_load_diag_module in sock.c and export one symbol
    only.
  - improve the changelog.

Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

There are 3 bug fixes in this series to fix regressions recently
introduced when adding the new ring reservations scheme.  2 minor
fixes in the TC Flower code to return standard errno values and
to elide some unnecessary warning dmesg.  One Fixes the VLAN TCI
value passed to the stack by including the entire 16-bit VLAN TCI,
and the last fix is to check for valid VNIC ID before setting up or
shutting down LRO/GRO.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

During initialization, if we encounter errors, there is a code path that
calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID.  This may cause a
warning in firmware logs.

Fixes: c0c050c5

 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_restore_pf_fw_resources routine frees PF resources by calling
close_nic and allocates the resources back, by doing open_nic. However,
this is not needed, if the PF is already in closed state.

This bug causes the driver to call open the device and call request_irq()
when it is not needed.  Ultimately, pci_disable_msix() will crash
when bnxt_en is unloaded.

This patch fixes the problem by skipping __bnxt_close_nic and
__bnxt_open_nic inside bnxt_restore_pf_fw_resources routine, if the
interface is not running.

Fixes: 80fcaf46

 ("bnxt_en: Restore MSIX after disabling SRIOV.")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, internal error value is returned by the driver, when
hwrm_cfa_flow_alloc() fails due lack of resources.  We should be returning
Linux errno value -ENOSPC instead.

This patch also converts other similar command errors to standard Linux errno
code (-EIO) in bnxt_tc.c

Fixes: db1d36a2

 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent changes added the bnxt_init_int_mode() call in the driver's open
path whenever ring reservations are changed.  This call was previously
only called in the probe path.  In the open path, if MQPRIO TC has been
setup, the bnxt_init_int_mode() call would reset and mess up the MQPRIO
per TC rings.

Fix it by not re-initilizing bp->tx_nr_rings_per_tc in
bnxt_init_int_mode().  Instead, initialize it in the probe path only
after the bnxt_init_int_mode() call.

Fixes: 674f50a5

 ("bnxt_en: Implement new method to reserve rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving a packet with VLAN tag, pass the entire 16-bit TCI to the
stack when calling __vlan_hwaccel_put_tag().  The current code is only
passing the 12-bit tag and it is missing the priority bits.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some conditions when the driver fails to add a flow in HW and returns
an error back to the stack, the stack continues to invoke get_flow_stats()
and/or del_flow() on it. The driver fails these APIs with an error message
"no flow_node for cookie". The message gets logged repeatedly as long as
the stack keeps invoking these functions.

Fix this by removing the corresponding netdev_info() calls from these
functions.

Fixes: d7bc7305

 ("bnxt_en: add code to query TC flower offload stats")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of vnics to check must be determined ahead of time because
only standard RX rings require vnics to support RFS.  The logic is
similar to the ring reservation logic and we can now use the
refactored common functions to do most of the work in setting up
the firmware message.

Fixes: 8f23d638

 ("bnxt_en: Expand bnxt_check_rings() to check all resources.")
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bnxt_hwrm_reserve_{pf|vf}_rings() functions are very similar to
the bnxt_hwrm_check_{pf|vf}_rings() functions.  Refactor the former
so that the latter can make use of common code in the next patch.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 664fcf12

 (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.

With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>