This should help when reviewing issues regarding regulatory
domain on ath5k/ath9k/ar9170.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Handle error condition on copy_from_user() properly and
make sure a NUL terminated char[] is sent to strict_strtoul()
for proper conversion.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Which means removing all rfkill code since it only does
soft-kill which cfg80211 will now handle in exactly the
same way the driver did.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

To be easier on drivers and users, have cfg80211 register an
rfkill structure that drivers can access. When soft-killed,
simply take down all interfaces; when hard-killed the driver
needs to notify us and we will take down the interfaces
after the fact. While rfkilled, interfaces cannot be set UP.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Sometimes it is necessary to know how the state is,
and it is easier to query rfkill than keep track of
it somewhere else, so add a function for that. This
could later be expanded to return hard/soft block,
but so far that isn't necessary.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch introduces new cfg80211 API to set the TX power
via cfg80211, puts the wext code into cfg80211 and updates
mac80211 to use all that. The -ENETDOWN bits are a hack but
will go away soon.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The new code added by this patch will make rfkill create
a misc character device /dev/rfkill that userspace can use
to control rfkill soft blocks and get status of devices as
well as events when the status changes.

Using it is very simple -- when you open it you can read
a number of times to get the initial state, and every
further read blocks (you can poll) on getting the next
event from the kernel. The same structure you read is
also used when writing to it to change the soft block of
a given device, all devices of a given type, or all
devices.

This also makes CONFIG_RFKILL_INPUT selectable again in
order to be able to test without it present since its
functionality can now be replaced by userspace entirely
and distros and users may not want the input part of
rfkill interfering with their userspace code. We will
also write a userspace daemon to handle all that and
consequently add the input code to the feature removal
schedule.

In order to have rfkilld support both kernels with and
without CONFIG_RFKILL_INPUT (or new kernels after its
eventual removal) we also add an ioctl (that only exists
if rfkill-input is present) to disable rfkill-input.
It is not very efficient, but at least gives the correct
behaviour in all cases.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch completely rewrites the rfkill core to address
the following deficiencies:

 * all rfkill drivers need to implement polling where necessary
   rather than having one central implementation

 * updating the rfkill state cannot be done from arbitrary
   contexts, forcing drivers to use schedule_work and requiring
   lots of code

 * rfkill drivers need to keep track of soft/hard blocked
   internally -- the core should do this

 * the rfkill API has many unexpected quirks, for example being
   asymmetric wrt. alloc/free and register/unregister

 * rfkill can call back into a driver from within a function the
   driver called -- this is prone to deadlocks and generally
   should be avoided

 * rfkill-input pointlessly is a separate module

 * drivers need to #ifdef rfkill functions (unless they want to
   depend on or select RFKILL) -- rfkill should provide inlines
   that do nothing if it isn't compiled in

 * the rfkill structure is not opaque -- drivers need to initialise
   it correctly (lots of sanity checking code required) -- instead
   force drivers to pass the right variables to rfkill_alloc()

 * the documentation is hard to read because it always assumes the
   reader is completely clueless and contains way TOO MANY CAPS

 * the rfkill code needlessly uses a lot of locks and atomic
   operations in locked sections

 * fix LED trigger to actually change the LED when the radio state
   changes -- this wasn't done before

Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

nl80211_michael_mic_failure can be called in atomic context but
does a GFP_KERNEL allocation.  Fixes the error below:

[  126.793225] BUG: sleeping function called from invalid context at mm/slab.c:3055
[  126.793234] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
[  126.793241] 2 locks held by swapper/0:
[  126.793246]  #0:  (&sc->rxbuflock){+.-.+.}, at: [<f94e1b46>] ath5k_tasklet_rx+0x34/0x55e [ath5k]
[  126.793294]  #1:  (rcu_read_lock){.+.+.+}, at: [<f92872f3>] __ieee80211_rx+0x7e/0x563 [mac80211]
[  126.793342] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-wl #124
[  126.793347] Call Trace:
[  126.793361]  [<c014499d>] ? __debug_show_held_locks+0x1e/0x20
[  126.793380]  [<c011e9a3>] __might_sleep+0x100/0x107
[  126.793386]  [<c018ea99>] kmem_cache_alloc+0x35/0x170
[  126.793393]  [<c02e8bb1>] ? __alloc_skb+0x2e/0x117
[  126.793397]  [<c014517d>] ? mark_held_locks+0x43/0x5b
[  126.793402]  [<c02e8bb1>] __alloc_skb+0x2e/0x117
[  126.793419]  [<f851a836>] nl80211_michael_mic_failure+0x2a/0x1fa [cfg80211]
[  126.793425]  [<c01453b8>] ? trace_hardirqs_on_caller+0xf6/0x130
[  126.793430]  [<c01453fd>] ? trace_hardirqs_on+0xb/0xd
[  126.793444]  [<f851b2b8>] cfg80211_michael_mic_failure+0x30/0x38 [cfg80211]
[  126.793463]  [<f928bf69>] mac80211_ev_michael_mic_failure+0xfd/0x108 [mac80211]
[  126.793480]  [<f9279fbd>] ieee80211_rx_h_michael_mic_verify+0xd4/0x117 [mac80211]
[  126.793499]  [<f9285ef3>] ieee80211_invoke_rx_handlers+0xdde/0x1963 [mac80211]
[  126.793505]  [<c0107152>] ? sched_clock+0x3f/0x64
[  126.793511]  [<c0107152>] ? sched_clock+0x3f/0x64
[  126.793516]  [<c01445d7>] ? trace_hardirqs_off+0xb/0xd
[  126.793521]  [<c0107152>] ? sched_clock+0x3f/0x64
[  126.793526]  [<c0146454>] ? __lock_acquire+0x62c/0x1271
[  126.793545]  [<f9286fbb>] __ieee80211_rx_handle_packet+0x543/0x564 [mac80211]
[  126.793564]  [<f9287757>] __ieee80211_rx+0x4e2/0x563 [mac80211]
[  126.793577]  [<f94e1ff6>] ath5k_tasklet_rx+0x4e4/0x55e [ath5k]
[  126.793583]  [<c0102b54>] ? restore_nocheck_notrace+0x0/0xe
[  126.793589]  [<c0129aa2>] tasklet_action+0x92/0xe5
[  126.793594]  [<c0129f22>] __do_softirq+0xb1/0x182
[  126.793599]  [<c012a023>] do_softirq+0x30/0x48
[  126.793603]  [<c012a19b>] irq_exit+0x3d/0x74
[  126.793609]  [<c0358016>] do_IRQ+0x76/0x8c
[  126.793613]  [<c010312e>] common_interrupt+0x2e/0x34
[  126.793618]  [<c014007b>] ? timer_list_show+0x277/0x939
[  126.793630]  [<f88eb321>] ? acpi_idle_enter_bm+0x266/0x291 [processor]
[  126.793636]  [<c02d00f6>] cpuidle_idle_call+0x6a/0x9c
[  126.793640]  [<c0101cc8>] cpu_idle+0x53/0x87
[  126.793645]  [<c0344510>] rest_init+0x6c/0x6e
[  126.793651]  [<c04dd74d>] start_kernel+0x286/0x28b
[  126.793656]  [<c04dd037>] __init_begin+0x37/0x3c

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch is to incorporate Dan Williams' comments for commit:
"libertas: implement function init/shutdown commands for SD8688"

1. remove fn_init_required and fn_shutdown_required variables from
lbs_private structure. If required, __lbs_cmd() will be called
directly to send function init/shutdown command for SD8688 in
if_sdio_probe() or if_sdio_remove() callback.

2. add global variable "user_rmmod" to distinguish between the module
removal case and the card removal case. This flag will be checked in
if_sdio_remove() against SD8688 card to determine whether or not the
function shutdown command needs to be sent.

3. remove "card" from if_sdio_model structure as it cannot store
card pointers for multiple cards. Besides, it's no longer needed
to store the "card" pointer with changes #1 & #2 above.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We're going to remove the FIRMWARE_NAME_MAX definition in order to avoid any
firmware name length restriction.
This patch gets rid of the statically allocated p54usb firmware string, and
replaces them with const char pointers.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwmc3200wifi: trim down calibration firmware name

The patch trims down iwmc3200wifi calibration firmware name from
iwmc3200wifi-lmac-calib-sdio.bin to iwmc3200wifi-calib-sdio.bin. We can
shorten the firmware name because all calibration is done by LMAC.

Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

"[PATCH 3/4 v2] ar9170: fix LED power state handling" revealed
a bug which can cause a ugly crash.

The delayed worker is canceled before the LED class functions are
unregistered... So, if something manages to update the LEDs
while unregister routine is running the timer could fire _after_ the
module has been unloaded.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch contains a few more mostly random fixes for the USB front-end.

1. handle irq command response, instead of printing it to the console.

2. remove fixed FIXME.
    (real fix: "ar9170usb: reset device on resume". )

3. some more one-liner.
	- get rid of a useless "return;"
	- add a few branch prediction hints in hot-paths
	etc.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch takes care of Johannes' deadlock report by moving the
mutex_lock right after cancel_work_sync in ar9170_op_stop.

Besides, the janitor does not need to hold the mutex anymore,
so this extra lines can be removed as well.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes a minor visual bug in the led code, which
left the LED in the wrong power state when it was toggled
in a _unexpected_ way (e.g: enabling the LED twice).

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch removes a redundant flag.

.cap	=	IEEE80211_HT_CAP_MAX_AMSDU |	\
>		IEEE80211_HT_CAP_SM_PS |			\ <
		[...]									\
>		IEEE80211_HT_CAP_SM_PS,			\ <
		.ampdu_factor   = 3,					\

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes a bug in configure_filter's (sub-)routines.
We never really cleared the flags once we updated the hardware state,
so we wasted our resources by applying already active settings.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch introduces 3 new function which are used to update
the MAC state, whenever needed... e.g: after a band switch.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch replace a few constant magics which may affected
the device when operating in a 40MHz channel.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch only contains a few uncritical updates for the
hardware definition header.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes a simple copy & paste error that affected beacon
transmission in 802.11a mode.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This removes the use of the deprecated radio_enabled setting
and code associated with that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This fixes an incorrect assumption (BUG_ON) made in
cfg80211 when handling country IE regulatory requests.
The assumption was that we won't try to call_crda()
twice for the same event and therefore we will not
recieve two replies through nl80211 for the regulatory
request. As it turns out it is true we don't call_crda()
twice for the same event, however, kobject_uevent_env()
*might* send the udev event twice and/or userspace can
simply process the udev event twice. We remove the BUG_ON()
and simply ignore the duplicate request.

For details refer to this thread:

http://marc.info/?l=linux-wireless&m=124149987921337&w=2



Cc: stable@kernel.org
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

NETDEV_UP is called after the device is set UP, but sometimes
it is useful to be able to veto the device UP. Introduce a
new NETDEV_PRE_UP notifier that can be used for exactly this.
The first use case will be cfg80211 denying interfaces to be
set UP if the device is known to be rfkill'ed.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This adds:

USB 0x057C:0x8401       AVM FRITZ!WLAN USB Stick N
USB 0x057C:0x8402       AVM FRITZ!WLAN USB Stick N 2.4

These devices require the 1-stage firmware, if not present we
don't continue.

Cc: Peter Grabienski <Peter.Grabienski@Atheros.com>
Cc: Stephen Chen <Stephen.Chen@Atheros.com>
Cc: Michael Fortin <Michael.Fortin@Atheros.com>
Cc: Johnny Cheng <Johnny.Cheng@Atheros.com>
Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com>
Cc: Joerg Albert <jal2@gmx.de>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

You can get the stage 1 firmware from here:

http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/ar9170.fw

md5sum: 34feec4ec0eae3bb92c7c1ea2dfb4530
sha1sum: 6e5250498b815c2940d97242de31e054ae44e079

Its license:

http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/LICENSE



This is a new firmware, tested with WNDA3100.

Cc: Peter Grabienski <Peter.Grabienski@Atheros.com>
Cc: Stephen Chen <Stephen.Chen@Atheros.com>
Cc: Michael Fortin <Michael.Fortin@Atheros.com>
Cc: Johnny Cheng <Johnny.Cheng@Atheros.com>
Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com>
Cc: Joerg Albert <jal2@gmx.de>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

It looks like mac80211 can request the driver to start beaconing with
a beacon interval of zero in some cases (at least for mesh point). This
does not sound correct and something may need to be fixed in
mac80211. However, taken into account the unpleasantness of getting
stuck in an infinite busy loop with rtnl_lock held, let's add a quick
workaround in the driver to avoid the worst symptom while someone more
familiar with the mesh implementation can figure out what should be done
with mac80211 as far as beacon interval configuration is concerned.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211_conf->beacon_int was deprecated and removed in a cleanup
patch, however it was accidentally added back to ath5k in the change
"ath5k: Allow user/driver to set txpower."  Remove it once more,
fixing the following warning:

[13091.968902] WARNING: at drivers/net/wireless/ath/ath5k/base.c:2167 warn_slowpath_null+0x15/0x1a()
[13091.968906] Hardware name: MacBook1,1
[13091.968909] Modules linked in: usb_storage fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy hid_apple arc4 ecb snd_seq_oss snd_seq_midi_event usbhid snd_seq ath5k mac80211 appletouch snd_seq_device snd_pcm_oss snd_mixer_oss sky2 snd_pcm ath processor cfg80211 snd_timer sg ohci1394 snd uhci_hcd bitrev ieee1394 joydev ehci_hcd crc32 snd_page_alloc button ac thermal battery sr_mod applesmc cdrom evdev input_polldev unix [last unloaded: microcode]
[13091.968985] Pid: 2132, comm: phy0 Tainted: G        W  2.6.30-rc5-wl #118
[13091.968988] Call Trace:
[13091.968994]  [<c0125884>] warn_slowpath_fmt+0x77/0xa6
[13091.969003]  [<c03557d8>] ? _spin_unlock+0x2c/0x41
[13091.969008]  [<c0355a56>] ? _spin_lock_irqsave+0x15/0x69
[13091.969012]  [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d
[13091.969019]  [<c01445bb>] ? trace_hardirqs_off+0xb/0xd
[13091.969024]  [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d
[13091.969029]  [<c01445bb>] ? trace_hardirqs_off+0xb/0xd
[13091.969034]  [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d
[13091.969039]  [<c01258c8>] warn_slowpath_null+0x15/0x1a
[13091.969054]  [<f965846d>] ath5k_beacon_update_timers+0x44/0x27f [ath5k]
[13091.969059]  [<c0126370>] ? vprintk+0x2dd/0x312
[13091.969063]  [<c0125e50>] ? release_console_sem+0x1a6/0x1d3
[13091.969076]  [<f96586c5>] ath5k_reset_tsf+0x1d/0x2c [ath5k]
[13091.969095]  [<f93f4426>] __ieee80211_sta_join_ibss+0x35/0x3aa [mac80211]
[13091.969102]  [<c0252793>] ? extract_entropy+0x47/0x8a
[13091.969121]  [<f93f4b21>] ieee80211_sta_find_ibss+0x2de/0x32f [mac80211]
[13091.969126]  [<c035422c>] ? mutex_lock_nested+0x28b/0x2a5
[13091.969145]  [<f93f4b8e>] ? ieee80211_ibss_notify_scan_completed+0x1c/0x6f [mac80211]
[13091.969164]  [<f93f4bc9>] ieee80211_ibss_notify_scan_completed+0x57/0x6f [mac80211]
[13091.969182]  [<f93f26da>] ieee80211_scan_completed+0x31a/0x33f [mac80211]
[13091.969201]  [<f93f27ca>] ieee80211_scan_work+0xcb/0x18b [mac80211]
[13091.969207]  [<c0133a6a>] worker_thread+0x1b1/0x28e
[13091.969212]  [<c0133a25>] ? worker_thread+0x16c/0x28e
[13091.969230]  [<f93f26ff>] ? ieee80211_scan_work+0x0/0x18b [mac80211]
[13091.969237]  [<c013736e>] ? autoremove_wake_function+0x0/0x38
[13091.969242]  [<c01338b9>] ? worker_thread+0x0/0x28e
[13091.969246]  [<c0137031>] kthread+0x4a/0x70
[13091.971460]  [<c0136fe7>] ? kthread+0x0/0x70
[13091.971467]  [<c0103527>] kernel_thread_helper+0x7/0x10
[13091.971470] ---[ end trace 8defaa5d15c50cef ]---

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When the SME requests to associate to an open AP
ieee80211_sta_set_extra_ie() can be called with zero IE
length. When this happens or when the extra IE has already
been set -EALREADY is passed down and the supplicant will
complain that the operation is already in progress and it will
not let us associate. We correct this by treating -EALREADY
from ieee80211_sta_set_extra_ie() as a success just as we do
for wext.

Cc: Shan.Palanisamy@Atheros.com
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch adds the debug file to the ath9k debugfs, which lets you modify
the debug_mask at runtime, without having to reload the ath9k module.

Signed-off-by: Jeff Hansen <x@jeffhansen.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch combines the legacy and 11n rcstats into one, using the normal
rate table indices instead of two separate indices for each mode.  Legacy
rates also get all of the PER and retry information, now, too.

Signed-off-by: Jeff Hansen <x@jeffhansen.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I have a TrendNet 652-BRP running OpenWRT + ath9k very well.  The only
problem is that the beacon gets stuck maybe once a day.  After
Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters
configuration" patch, ath9k would nearly re-configure the beacons after it
detected the stuck beacon, and did a reset.  But it would fail the
SC_OP_TSF_RESET check in ath_beacon_config_ap.  This patch gets the beacon
fully reconfigured after the reset.

Signed-off-by: Jeff Hansen <x@jeffhansen.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

On non-AP interfaces userspace has no business interfering with
the station management, this can confuse mac80211 (and other
drivers probably wouldn't support it anyway). Allow adding and
removing stations only on AP interfaces.

(Reconcile this w/ previous version of patch posted with same
subject... -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I accidentally transposed these in the patch that "fixed" the defaults,
leading to extremely low throughput because of the huge min CW.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Fix printk format for size_t variable:

drivers/net/wireless/iwmc3200wifi/fw.c:75: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: ilw@linux.intel.com
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We were sending the fragmentation threshold value to the wrong table,
causing an LMAC assert when setting it from wext.

Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following
warning:
/work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’:
/work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning:
unused variable ‘inta_fh’

This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG
before the declaration of inta_fh in iwl_isr() in
drivers/net/wireless/iwlwifi/iwl-core.c

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Instead of hardcoding the key length for validation, use the
constants Zhu Yi recently added and add one for AES_CMAC too.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>