Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: bugfixes for leds-gpio

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Add Kconfig option to disable deprecated pci_find_* API
  PCI: pciserial_resume_one ignored return value of pci_enable_device
  PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check
  PCI: make pci_match_device() static
  PCI: Remove 3 incorrect MSI quirks.
  PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
  PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.
  PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.
  PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"

Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks:

 - Do the INIT_WORK() before registering each LED, so if its trigger
   becomes immediately active it can schedule work without oopsing..

 - Use normal registration, not platform_driver_probe(), so that
   devices appearing "late" (hotplug type) can still be bound.

 - Mark the driver remove code as "__devexit", preventing oopses
   when the underlying device is removed.

These issues came up when using this driver with some GPIO expanders
living on serial busses, which act unlike "normal" platform devices:
they can appear and vanish along with the serial bus driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma()
  ide: move ide_fixstring() documentation to ide-iops.c from ide.h
  ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL
  ide: fix ide_find_dma_mode() to print human-readable info
  ide: add missing rq.ref_count initialization to ide_diag_taskfile()
  ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd()
  ide: check rq->cmd_type in drive_cmd_intr()
  ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies
  ide: unexport ide_fix_driveid
  ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page
  ide: do_identify() string termination fix
  piix: add support for ICH7 on Acer 5602aWLMi

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits)
  V4L/DVB (6548): pvrusb2: Fix oops on module removal
  V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends
  V4L/DVB (6532): Add the remaining addresses for tda9887
  V4L/DVB (6531): Fix a regression caused by commit 15396236
  V4L/DVB (6518): Fix tvp5150 default values
  V4L/DVB (6514): em28xx: Include linux/mm.h
  V4L/DVB (6506): saa7134-alsa: Fix mmap support
  V4L/DVB (6504): pvrusb2: Remove dead sysfs code
  V4L/DVB (6503): pvrusb2: Fix associativity logic error
  V4L/DVB (6501): stv0297: Signal strength fixes
  V4L/DVB (6500): tda10021: Fix reported signal strength
  V4L/DVB (6499): tda10021: Bit error counting fixed
  V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm
  V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes
  V4L/DVB (6479): use input functions, should depend on INPUT
  V4L/DVB (6478): ir-functions use input functions, should depend on INPUT
  V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m
  V4L/DVB (6407): planb: fix obvious interrupt handling bugs
  V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro
  V4L/DVB (6403): mt2131: replace comma with semicolon fix
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild:
  kbuild: do not pick up CFLAGS from the environment

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] pciserial_resume_one ignored return value of pci_enable_device

Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Coverity checker spotted that we'd have already oops'ed if "ctrl"
was NULL.

Additionally, "func" had just been checked for not being NULL.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pci_match_device() no longer has any other users.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that we have dealt with the real issue, in that some ATI SATA and
USB controllers needed the INTX_DISABLE quirk, we can remove these AMD
chipset global MSI disabling quirks.

This reverts three changesets:

4be8f906 (PCI: disable MSI on RS690)
aea6a433 (PCI: disable MSI on RD580)
f122392f

 (PCI: disable MSI on RX790)

This is based upon testing and feedback from
Shane Huang <Shane.Huang@amd.com>.

Cc: Shane Huang <Shane.Huang@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

A reasonably common problem with some devices is that they will
disable MSI generation when the INTX_DISABLE bit is set in the
PCI_COMMAND register.

Quirk this explicitly, guarding the pci_intx() calls in msi.c with
this quirk indication.

The first entries for this quirk are for 5714 and 5780 Tigon3 chips,
and thus we can remove the workaround code from the tg3.c driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the fix for the following problem:

https://bugzilla.redhat.com/show_bug.cgi?id=227657

The bnx2 device 5706 complains about MSI not working behind a
ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem:

e3008ded

:

"PCI: disable MSI by default on systems with Serverworks HT1000 chips"

was not entirely correct, and has been reverted.

MSI does not work on the PCIX bus because the BIOS did not set the
HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the
bridge.  We use the existing quirk_msi_ht_cap() to detect the problem
and disable MSI in all buses behind it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Cc: Anantha Subramanyam <ananth@broadcom.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This reverts commit e3008ded

.

The real bug was an INTX issue in the tg3 ethernet chip, and
cured by commit c129d962a66c76964954a98b38586ada82cf9381

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit 33c1002e

 incorrectly changed return
value from '0' to '-1', fix it (ns87415 was the only host driver affected
since it uses both IDE_HFLAG_TRUST_BIOS_FOR_DMA and IDE_HFLAG_NO_ATAPI_DMA).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Problem reported by Mikael.

Cc: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Noticed by Tejun Heo.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_dump_ata_status() may set HOB bit before ide_end_drive_cmd() is called.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drive_cmd_intr() is used by both REQ_TYPE_ATA_CMD and REQ_TYPE_ATA_TASK
but commands using PIO-in protocol are valid only for REQ_TYPE_ATA_CMD
(&args[4] in case of REQ_TYPE_ATA_TASK points to a value for IDE_LCYL_REG
register instead of the data buffer).  This fix allows REQ_TYPE_ATA_TASK
commands to use non-zero values for IDE_SECTOR_REG (args[3]).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This config option is effective only for host drivers that use
IDE_HFLAG_OFF_BOARD host flag (aec62xx, generic, hpt34x, hpt366,
pdc202xx_new, pdc202xx_old and tc86c001).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_fix_driveid can now be unexported.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDEDISK_MULTI_MODE text adapted from hdparm manual page.

Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Terminates id->model string before invoking strstr() in do_identify().

Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In piix.c (and in ata_piix.c) are already included some patches to skip the
cable check on some laptops and to enable UDMA > 33 modes, but I've noticed
than theese doesn't work on my Acer Aspire 5602WLMi (maybe exist more
versions of this laptop).  With this simple patch I can set transfer mode
to UDMA100.

From: "sebdeg@ngi.it" <sebdeg@ngi.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] tod clock: announce clocksource as perfect
  [S390] Rename "idle_time" attribute to "idle_time_us".
  [S390] Fix priority mistakes in drivers/s390/cio/cmf.c
  [S390] Fix memory detection.
  [S390] Fix compile on !CONFIG_SMP.
  [S390] device_schedule_callback() for dcssblk.
  [S390] Fix smsgiucv init on no iucv machines
  [S390] cio: use INIT_WORK to initialize struct work.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest:
  lguest: tidy up documentation
  kernel/futex.c: make 3 functions static
  unexport access_process_vm
  lguest: make async_hcall() static

Commit f2a0bd37

 defines the function
with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as
"extern void cpm_load_patch(volatile immap_t *immr)" in the header file.

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the memory leak that may occur when we attempt to reuse a cpu_slab
that was allocated while we reenabled interrupts in order to be able to
grow a slab cache.

The per cpu freelist may contain objects and in that situation we may
overwrite the per cpu freelist pointer loosing objects.  This only
occurs if we find that the concurrently allocated slab fits our
allocation needs.

If we simply always deactivate the slab then the freelist will be
properly reintegrated and the memory leak will go away.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] ibmvscsi: Prevent IO during partner login
  [SCSI] lpfc : Correct queue tag handling
  [SCSI] Update MAINTAINER email address and trees
  [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false

After Adrian Bunk's "make async_hcall static" moved things around, update
comments to match (aka "make Guest").

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The following functions can now become static again:
- get_futex_key()
- get_futex_key_refs()
- drop_futex_key_refs()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This patch removes the no longer used EXPORT_SYMBOL_GPL(access_process_vm).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

async_hcall() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The Time of Day clock is the standard time source for s390. It is
- monotonic
- allows very fast reading
- architecture guarantees at least microsecond stepping
- available as part of the architecture

We should announce the rate of tod as 400 to be in sync with the
description found in clocksource.h:
"400-499:Perfect The ideal clocksource. A must-use where available."

This change will prefer tod over less reliable clock sources.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Seems that people prefer to have the unit encoded in the attribute
name. Also makes parsing easier.

Now we have:

# cat /sys/devices/system/cpu/cpu0/idle_time_us
131473592

instead of

# cat /sys/devices/system/cpu/cpu0/idle_time
131473592 us

Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fixes priority mistakes similar to '!x & y'

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>