- Apr 18, 2008
-
-
Lachlan McIlroy authored
The three subcases of xfs_ioc_xattr don't share any semantics and almost no code, so split it into three separate helpers. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30709a Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
- rename rootvp to root for clarify - remove useless vn_to_inode call - check is_bad_inode before calling d_alloc_root - use iput instead of VN_RELE in the error case SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30708a Signed-off-by:
-
David Chinner authored
When writing into preallocated regions there is a case where XFS can oops or hang doing the unwritten extent conversion on I/O completion. It turns out that the problem is related to the btree cursor being invalid. When we do an insert into the tree, we may need to split blocks in the tree. When we only split at the leaf level (i.e. level 0), everything works just fine. However, if we have a multi-level split in the btreee, the cursor passed to the insert function is no longer valid once the insert is complete. The leaf level split is handled correctly because all the operations at level 0 are done using the original cursor, hence it is updated correctly. However, when we need to update the next level up the tree, we don't use that cursor - we use a cloned cursor that points to the index in the next level up where we need to do the insert. Hence if we need to split a second level, the changes to the tree are reflected in the cloned cursor and not the original cursor. This clone-and-move-up-a-level-on-split behaviour recurses all the way to the top of the tree. The complexity here is that these cloned cursors do not point to the original index that was inserted - they point to the newly allocated block (the right block) and the original cursor pointer to that level may still point to the left block. Hence, without deep examination of the cloned cursor and buffers, we cannot update the original cursor with the new path from the cloned cursor. In these cases the original cursor could be pointing to the wrong block(s) and hence a subsequent modification to the tree using that cursor will lead to corruption of the tree. The crash case occurs when the tree changes height - we insert a new level in the tree, and the cursor does not have a buffer in it's path for that level. Hence any attempt to walk back up the cursor to the root block will result in a null pointer dereference. To make matters even more complex, the BMAP BT is rooted in an inode, so we can have a change of height in the btree *without a root split*. That is, if the root block in the inode is full when we split a leaf node, we cannot fit the pointer to the new block in the root, so we allocate a new block, migrate all the ptrs out of the inode into the new block and point the inode root block at the newly allocated block. This changes the height of the tree without a root split having occurred and hence invalidates the path in the original cursor. The patch below prevents xfs_bmbt_insert() from returning with an invalid cursor by detecting the cases that invalidate the original cursor and refresh it by do a lookup into the btree for the original index we were inserting at. Note that the INOBT, AGFBNO and AGFCNT btree implementations also have this bug, but the cursor is currently always destroyed or revalidated after an insert for those trees. Hence this patch only address the problem in the BMBT code. SGI-PV: 979339 SGI-Modid: xfs-linux-melb:xfs-kern:30701a Signed-off-by:
David Chinner <dgc@sgi.com> Signed-off-by:
-
David Chinner authored
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty transaction in xfs_mkdir or xfs_create. This is due to the initial allocation attempt not taking into account inode alignment and hence we can prepare the AGF freelist for allocation when it's not actually possible to do an allocation. This results in inode allocation returning ENOSPC with a dirty transaction, and hence we shut down the filesystem. Because the first allocation is an exact allocation attempt, we must tell the allocator that the alignment does not affect the allocation attempt. i.e. we will accept any extent alignment as long as the extent starts at the block we want. Unfortunately, this means that if the longest free extent is less than the length + alignment necessary for fallback allocation attempts but is long enough to attempt a non-aligned allocation, we will modify the free list. If we then have the exact allocation fail, all other allocation attempts will also fail due to the alignment constraint being taken into account. Hence the initial attempt needs to set the "alignment slop" field so that alignment, while not required, must be taken into account when determining if there is enough space left in the AG to do the allocation. That means if the exact allocation fails, we will not dirty the freelist if there is not enough space available fo a subsequent allocation to succeed. Hence we get an ENOSPC error back to userspace without shutting down the filesystem. SGI-PV: 978886 SGI-Modid: xfs-linux-melb:xfs-kern:30699a Signed-off-by:
-
Josef 'Jeff' Sipek authored
Replace the xfs_ail_entry_t with a struct list_head and clean the surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail() by terminating the loop at the head of the list correctly. SGI-PV: 978682 SGI-Modid: xfs-linux-melb:xfs-kern:30636a Signed-off-by:
Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by:
-
Christoph Hellwig authored
When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines above unconditionally, so there is no need to try to read the superblock if it's not present. If any other port doesn't have the superblock read at this point it should just call it directly from it's xfs_mount equivalent. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30603a Signed-off-by:
Donald Douwsma <donaldd@sgi.com> Signed-off-by:
-
Niv Sardi authored
It's completely unused so we might aswell kill it. Note that there is another t_sema in struct xlog_ticket, which is used and actually an sv_t despite the name. That one is left untouched by this patch. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30591a Signed-off-by:
Niv Sardi <xaiki@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30553a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30552a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30551a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30550a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30548a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30547a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30546a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30545a Signed-off-by:
-
David Chinner authored
Now that the ktrace_enter() code is using atomics, the non-power-of-2 buffer sizes - which require modulus operations to get the index - are showing up as using substantial CPU in the profiles. Force the buffer sizes to be rounded up to the nearest power of two and use masking rather than modulus operations to convert the index counter to the buffer index. This reduces ktrace_enter overhead to 8% of a CPU time, and again almost halves the trace intensive test runtime. SGI-PV: 977546 SGI-Modid: xfs-linux-melb:xfs-kern:30538a Signed-off-by:
-
David Chinner authored
ktrace_enter() is consuming vast amounts of CPU time due to the use of a single global lock for protecting buffer index increments. Change it to use per-buffer atomic counters - this reduces ktrace_enter() overhead during a trace intensive test on a 4p machine from 58% of all CPU time to 12% and halves test runtime. SGI-PV: 977546 SGI-Modid: xfs-linux-melb:xfs-kern:30537a Signed-off-by:
-
David Chinner authored
XFS changes the c/mtime of an inode when truncating it to the same size. The c/mtime is only supposed to change if the size is changed. Not to be confused with ftruncate, where the c/mtime is supposed to be changed even if the size is not changed. The Linux VFS encodes this semantic difference in the flags it sends down to ->setattr, which XFS currently ignores. We need to make XFS pay attention to the VFS flags and hence Do The Right Thing. SGI-PV: 977547 SGI-Modid: xfs-linux-melb:xfs-kern:30536a Signed-off-by:
-
Christoph Hellwig authored
As Dave pointed out after the export ops changes we now always encode the parent into the filehandle for regular files, but it's not actually needed when the filesystem is export with no_subtree_check. This one-liner fixes xfs_fs_encode_fh to skip encoding the parent unless nessecary. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30535a Signed-off-by:
-
Christoph Hellwig authored
We can just use xfs_ilock/xfs_iunlock instead and get rid of the ugly bhv_vrwlock_t. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30533a Signed-off-by:
-
Christoph Hellwig authored
Instead of of xfs_get_dir_entry use a macro to get the xfs_inode from the dentry in the callers and grab the reference manually. Only grab the reference once as it's fine to keep it over the dmapi calls. (And even that reference is actually superflous in Linux but I'll leave that for another patch) SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30531a Signed-off-by:
-
Christoph Hellwig authored
Cleanup the unneeded intermediate vnode step in the flushing helpers and go directly from the xfs_inode to the struct address_space. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30530a Signed-off-by:
-
Christoph Hellwig authored
- use proper goto based unwinding instead of the current mess of multiple conditionals - rename ip to inode because that's the normal convention for Linux inodes while ip is the convention for xfs_inodes - remove unlikely checks for the default_acl - branches marked unlikely might lead to extreme branch bredictor slowdons if taken and for some workloads a default acl is quite common - properly indent the switch statements - remove xfs_has_fs_struct as nfsd has a fs_struct in any semi-recent kernel SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30529a Signed-off-by:
-
David Chinner authored
Now that we update the log tail LSN less frequently on transaction completion, we pass the contention straight to the global log state lock (l_iclog_lock) during transaction completion. We currently have to take this lock to decrement the iclog reference count. there is a reference count on each iclog, so we need to take þhe global lock for all refcount changes. When large numbers of processes are all doing small trnasctions, the iclog reference counts will be quite high, and the state change that absolutely requires the l_iclog_lock is the except rather than the norm. Change the reference counting on the iclogs to use atomic_inc/dec so that we can use atomic_dec_and_lock during transaction completion and avoid the need for grabbing the l_iclog_lock for every reference count decrement except the one that matters - the last. SGI-PV: 975671 SGI-Modid: xfs-linux-melb:xfs-kern:30505a Signed-off-by:
Tim Shimmin <tes@sgi.com> Signed-off-by:
-
David Chinner authored
When hundreds of processors attempt to commit transactions at the same time, they can contend on the AIL lock when updating the tail LSN held in the in-core log structure. At the moment, the tail LSN is only needed when actually writing out an iclog, so it really does not need to be updated on every single transaction completion - only those that result in switching iclogs and flushing them to disk. The result is that we reduce the number of times we need to grab the AIL lock and the log grant lock by up to two orders of magnitude on large processor count machines. The problem has previously been hidden by AIL lock contention walking the AIL list which was recently solved and uncovered this issue. SGI-PV: 975671 SGI-Modid: xfs-linux-melb:xfs-kern:30504a Signed-off-by:
-
David Chinner authored
Remove open coded checks for the whether the inode is clean and replace them with an inlined function. SGI-PV: 977461 SGI-Modid: xfs-linux-melb:xfs-kern:30503a Signed-off-by:
-
David Chinner authored
Remove the xfs_icluster structure and replace with a radix tree lookup. We don't need to keep a list of inodes in each cluster around anymore as we can look them up quickly when we need to. The only time we need to do this now is during inode writeback. Factor the inode cluster writeback code out of xfs_iflush and convert it to use radix_tree_gang_lookup() instead of walking a list of inodes built when we first read in the inodes. This remove 3 pointers from each xfs_inode structure and the xfs_icluster structure per inode cluster. Hence we reduce the cache footprint of the xfs_inodes by between 5-10% depending on cluster sparseness. To be truly efficient we need a radix_tree_gang_lookup_range() call to stop searching once we are past the end of the cluster instead of trying to find a full cluster's worth of inodes. Before (ia64): $ cat /sys/slab/xfs_inode/object_size 536 After: $ cat /sys/slab/xfs_inode/object_size 512 SGI-PV: 977460 SGI-Modid: xfs-linux-melb:xfs-kern:30502a Signed-off-by:
-
David Chinner authored
When pdflush is writing back inodes, it can get stuck on inode cluster buffers that are currently under I/O. This occurs when we write data to multiple inodes in the same inode cluster at the same time. Effectively, delayed allocation marks the inode dirty during the data writeback. Hence if the inode cluster was flushed during the writeback of the first inode, the writeback of the second inode will block waiting for the inode cluster write to complete before writing it again for the newly dirtied inode. Basically, we want to avoid this from happening so we don't block pdflush and slow down all of writeback. Hence we introduce a non-blocking async inode flush flag that pdflush uses. If this flag is set, we use non-blocking operations (e.g. try locks) whereever we can to avoid blocking or extra I/O being issued. SGI-PV: 970925 SGI-Modid: xfs-linux-melb:xfs-kern:30501a Signed-off-by:
-
David Chinner authored
The only difference between the functions is one passes an inode for the lookup, the other passes an inode number. However, they don't do the same validity checking or set all the same state on the buffer that is returned yet they should. Factor the functions into a common implementation. SGI-PV: 970925 SGI-Modid: xfs-linux-melb:xfs-kern:30500a Signed-off-by:
-
Lachlan McIlroy authored
SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30490a Signed-off-by:
-
Donald Douwsma authored
Remove the xfs_refcache, it was only needed while we were still building for 2.4 kernels. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30472a Signed-off-by:
-
Lachlan McIlroy authored
On a forced shutdown, xfs_finish_reclaim() will skip flushing the inode. If the inode flush lock is not already held and there is an outstanding xfs_iflush_done() then we might free the inode prematurely. By acquiring and releasing the flush lock we will synchronise with xfs_iflush_done(). SGI-PV: 909874 SGI-Modid: xfs-linux-melb:xfs-kern:30468a Signed-off-by:
-
Niv Sardi authored
bailout if fails. SGI-PV: 973041 SGI-Modid: xfs-linux-melb:xfs-kern:30462a Signed-off-by:
-
- Apr 17, 2008
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it821x: do not describe noraid parameter with its value Pb1200/DBAu1200: fix bad IDE resource size Au1200: IDE driver build fix Au1200: kill IDE driver function prototypes avr32 mustn't select HAVE_IDE
-
Paul Bolle authored
Describe noraid parameter with its name (and not its value). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Sergei Shtylyov authored
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Sergei Shtylyov authored
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by:
-
Sergei Shtylyov authored
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by:
-
Adrian Bunk authored
There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
