- Sep 09, 2008
-
-
Krzysztof Helt authored
The __exit cleanup_oss_soundcore() is called from the __init init_soundcore(). This causes section mismatch and breaks kernel's linking on sparc64. Remove the __exit attribute from the cleanup_oss_soundcore(). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock for protection of card->ctl_files entries, instead of card->controls_rwsem. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by:
-
Vedran Miletic authored
Inspired by Alexander Beregalov's patches for wtm and aureon.c, I decided to run checkpatch on some more files. After some work checkpatch.pl-0.23 --no-tree --file --strict <file> reports 0 errors, 0 warnings, 0 checks, n lines checked for: phase.c phase.h juli.c (1 check about unused code, maybe we should comment it) juli.h (no changes necessary) In other files I have just fixed // comments and long lines along the way (but not all of them), more coming up. Signed-off-by:
Vedran Miletic <rivanvx@gmail.com> Signed-off-by:
-
Matthew Ranostay authored
Removed unneeded hp_nid references for 92hd73xx codec family. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs. Signed-off-by:
-
Alexander Beregalov authored
before: total: 2 errors, 0 warnings, 20 lines checked total: 49 errors, 2 warnings, 518 lines checked after: total: 0 errors, 0 warnings, 20 lines checked total: 0 errors, 0 warnings, 518 lines checked Compile tested, size and code are equal. Signed-off-by:
-
Alexander Beregalov authored
before: total: 304 errors, 137 warnings, 2259 lines checked after: total: 0 errors, 121 warnings, 2284 lines checked Compile tested, size is different because of include was changed, but without that change md5sum is different because of cmp cx,dx/cmp dx,cx swap and __LINE__ was changed in printk function. Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
[Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
[Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
SPORT is a serial port which can support serveral serial communication protocols. It can be used as I2C/PCM/AC97. For further information, please look up the HRM. [Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
[Some checkpatch fixups done by Mark Brown.] Signed-off-by:
-
Jean Delvare authored
Convert the wm8510 codec driver to the new (standard) device driver binding model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Geoffrey Wossum <gwossum@acm.org> Signed-off-by:
-
Jean Delvare authored
Convert the lm4857 driver in neo1973_wm8753 to the new (standard) i2c device driver binding model. I assumed that the LM4857 was always on the same I2C bus as the WM8753 codec. Signed-off-by:
-
Jean Delvare authored
Convert the wm8753 codec driver to the new (standard) i2c device driver binding model. Signed-off-by:
-
Jean Delvare authored
The error handling in neo1973_init is incorrect: * If platform_device_add fails, we go on with the rest of the initialization instead of bailing out. Things will break when the module is removed (platform_device_unregister called on a device that wasn't registered.) * If i2c_add_driver fails, we return an error so the module will not load, but we don't unregister neo1973_snd_device, so we are leaking resources. Add the missing error handling. Signed-off-by:
-
Robert P. J. Day authored
Remove the Kconfig definitions of unused variables AEDSP16_MSS and AEDSP16_SBPRO since they're: 1) unused, and 2) referenced incorrectly anyway. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Randy Dunlap authored
CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs to be enabled (selected). ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Takashi Iwai authored
Empty files remained likely due to wrong patching. Remove them now. Signed-off-by:
-
Takashi Iwai authored
Allow probing of 4 codecs on known good situations. On some known bad situations, it should be avoided. Signed-off-by:
-
- Sep 04, 2008
-
-
Cliff Cai authored
Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
Mark Brown authored
Currently the boiler plate code used by most ASoC codecs to provide a placeholder for SPI access suggests making the selection of SPI a compile time option which is suboptimal when trying to build kernels supporting multiple systems. Change this template to suggest allowing runtime selection instead. Leave the drivers not yet converted to new style I2C access for now to avoid collisions. Signed-off-by:
-
Cliff Cai authored
[Modified to allow runtime selection between I2C and SPI and to select SPI_MASTER for all codecs build so this is included. -- broonie] Signed-off-by:
-
Jean Delvare authored
Convert the wm8990 codec driver to the new (standard) device driver binding model. After this change, WM8990 devices are no longer discovered automatically and must instead be instantiated explicitly. Signed-off-by:
-
Jean Delvare authored
Convert the wm8731 codec driver to the new (standard) device driver binding model. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
-
Jean Delvare authored
Convert the wm8750 codec driver to the new (standard) device driver binding model. Signed-off-by:
-
Jean Delvare authored
Convert the ak4535 codec driver to the new (standard) device driver binding model. After this change, AK4535 devices are no longer discovered automatically and must instead be instantiated explicitly. Signed-off-by:
-
Jean Delvare authored
Convert the uda1380 codec driver to the new (standard) device driver binding model. Signed-off-by:
-
Mark Brown authored
The I2C layer uses I/O operations that aren't available on all architectures and since select bypasses Kconfig dependency checking selecting I2C breaks builds like allmodconfig on some architectures. Signed-off-by:
-
Takashi Iwai authored
Fix a typo in the patch to remove snd_assert(). Signed-off-by:
-
Takashi Iwai authored
The original fix by Julien Brunel <brunel@diku.dk>. aaci_init_card() returns a pointer with ERR_PTR(), but in aaci_init() NULL is supposed at this error path. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
