This adds net namespace ID to the kernel log, net_cookie is unique in
the whole system. It is useful in container environment.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds net namespace ID to diag of linkgroup, helps us to distinguish
different namespaces, and net_cookie is unique in the whole system.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, rdma device supports exclusive net namespace isolation,
however linkgroup doesn't know and support ibdev net namespace.
Applications in the containers don't want to share the nics if we
enabled rdma exclusive mode. Every net namespaces should have their own
linkgroups.

This patch introduce a new field net for linkgroup, which is standing
for the ibdev net namespace in the linkgroup. The net in linkgroup is
initialized with the net namespace of link's ibdev. It compares the net
of linkgroup and sock or ibdev before choose it, if no matched, create
new one in current net namespace. If rdma net namespace exclusive mode
is not enabled, it behaves as before.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-12-30

The following pull-request contains BPF updates for your *net-next* tree.

We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).

The main changes are:

1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.

2) Beautify and de-verbose verifier logs, from Christy.

3) Composable verifier types, from Hao.

4) bpf_strncmp helper, from Hou.

5) bpf.h header dependency cleanup, from Jakub.

6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.

7) Sleepable local storage, from KP.

8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 Software steering, New features and optimizations

This patch series brings various SW steering features, optimizations and
debug-ability focused improvements.

 1) Expose debugfs for dumping the SW steering resources
 2) Removing unused fields
 3) support for matching on new fields
 4) steering optimization for RX/TX-only rules
 5) Make Software steering the default steering mechanism when
    available, applies only to Switchdev mode FDB

From Yevgeny Kliteynik and Muhammad Sammar:

 - Patch 1 fixes an error flow in creating matchers
 - Patch 2 fix lower case macro prefix "mlx5_" to "MLX5_"
 - Patch 3 removes unused struct member in mlx5dr_matcher
 - Patch 4 renames list field in matcher struct to list_node to reflect the
   fact that is field is for list node that is stored on another struct's lists
 - Patch 5 adds checking for valid Flex parser ID value
 - Patch 6 adds the missing reserved fields to dr_match_param and aligns it to
   the format that is defined by HW spec
 - Patch 7 adds support for dumping SW steering (SMFS) resources using debugfs
   in CSV format: domain and its tables, matchers and rules
 - Patch 8 adds support for a new destination type - UPLINK
 - Patch 9 adds WARN_ON_ONCE on refcount checks in SW steering object destructors
 - Patches 10, 11, 12 add misc5 flow table match parameters and add support for
   matching on tunnel headers 0 and 1
 - Patch 13 adds support for matching on geneve_tlv_option_0_exist field
 - Patch 14 implements performance optimization for for empty or RX/TX-only
   matchers by splitting RX and TX matchers handling: matcher connection in the
   matchers chain is split into two separate lists (RX only and TX only), which
   solves a usecase of many RX or TX only rules that create a long chain of
   RX/TX-only paths w/o the actual rules
 - Patch 15 ignores modify TTL if device doesn't support it instead of
   adding and unsupported action
 - Patch 16 sets SMFS as a default steering mode
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: refactor cmdq functions in PF/VF

Currently, hns3 PF and VF module have two sets of cmdq APIs to provide
cmdq message interaction functions. Most of these APIs are the same. The
only differences are the function variables and names with pf and vf
suffixes. These two sets of cmdq APIs are redundent and add extra bug fix
work.

This series refactor the cmdq APIs in hns3 PF and VF by implementing one
set of common cmdq APIs for PF and VF reuse and deleting the old APIs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

currently most cmdq APIs are unified in hclge_comm_cmd.c. Newly developed
cmdq APIs should also be placed in hclge_comm_cmd.c. So there is no need to
keep hclge_cmd.c and hclgevf_cmd.c.

This patch moves the hclge(vf)_cmd_send to hclge(vf)_main.c and deletes
the source files and makefile scripts.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses common cmdq init and uninit APIs to replace the old APIs in
VF cmdq module init and uninit module. Then the old VF init and uninit
APIs is deleted.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses common cmdq init and uninit APIs to replace the old APIs in
PF cmdq module init and uninit modules. Then the old PF init and uninit
APIs is deleted.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PF and VF cmdq init and uninit APIs are also almost same espect the
suffixes of API names.

This patch creates common cmdq init and uninit APIs needed by PF and VF
cmdq modules. The next patch will use the new unified APIs to replace init
and uninit APIs in PF module.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in VF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclgevf_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in PF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclge_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PF and VF cmdq module resource allocate/free/query APIs are almost the
same espect the suffixes of API names. These same implementations bring
double development and bugfix work.

This patch creates common cmdq resource allocate/free/query APIs called by
PF and VF cmdq init/uninit APIs. The next patch will use the new unified
APIs to replace init/uninit APIs.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclgevf_hw and deletes the old hardware description child
members. All the hclgevf_hw variables used in VF module is modified
according to the new hclgevf_hw.

Secondly hclgevf_cmd_send is refactored to use hclge_comm_cmd_send APIs.
The old functions called by hclgevf_cmd_send are all deleted. Still we kept
hclgevf_cmd_send to avoid too many meaningless modifications.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclge_hw and deletes the original child memebers of
hclge_hw. All the hclge_hw variables used in PF module is modified
according to the new hclge_hw.

Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The
old functions called by hclge_cmd_send are deleted and hclge_cmd_send is
kept to avoid too many meaningless modifications.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch create new set of unified hclge_comm_cmd_send APIs for PF and VF
cmdq module. Subfunctions called by hclge_comm_cmd_send are also created
include cmdq result check, cmdq return code conversion and ring space
opertaion APIs.

These new common cmdq APIs will be used to replace the old PF and VF cmdq
APIs in next patches.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch use new common struct hclge_desc to replace struct hclgevf_desc
in VF cmdq module and then delete the old struct hclgevf_desc.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently PF and VF cmdq APIs use struct hclge(vf)_hw to describe cmdq
hardware information needed by hclge(vf)_cmd_send. There are a little
differences between its child struct hclge_cmq_ring and hclgevf_cmq_ring.
It is redundent to use two sets of structures to support same functions.

So this patch creates new set of common cmdq hardware description
structures(hclge_comm_hw) to unify PF and VF cmdq functions. The struct
hclge_desc is still kept to avoid too many meaningless replacement.

These new structures will be used to unify hclge(vf)_hw structures in PF
and VF cmdq APIs in next patches.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we plan to refactor PF and VF cmdq module. A new file folder
hns3_common will be created to store new common APIs used by PF and VF
cmdq module. Thus the PF and VF compilation process will both depends on
the hns3_common. This may cause parallel building problems if we add a new
makefile building unit.

So this patch combined the PF and VF makefile scripts to the top level
makefile to support the new hns3_common which will be created in the next
patch.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set SMFS (SW-managed flow steering) as a default steering mode
instead of DMFS (device-managed flow steering)

In SMFS, the driver writes the STEs (Steering Table Entries) directly
to the device's ICM, which allows for a higher rule insertion rate
than through using FW command interface, as it is done in DMFS.

SMFS/DMFS steering modes can be configured through devlink param
'flow_steering_mode'. The possible values are 'smfs' or 'dmfs'.
The desired 'flow_steering_mode' param value should be set before
enabling switchdev mode.

Example:

  # devlink dev param set pci/0000:05:00.0 name flow_steering_mode smfs
  # devlink dev eswitch set pci/0000:05:00.0 mode switchdev

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify TTL
is supported through a work-around that is specifically enabled
by configuration.
If the work-around isn't enabled, ignore the modify TTL action
rather than adding an unsupported action.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Every matcher has RX and TX paths. When a new matcher is created, its RX
and TX start/end anchors are connected to the respective RX and TX anchors
of the previous and next matchers.
This creates a potential performance issue: when a certain rule is added
to a matcher, in many cases it is RX or TX only rule, which may create a
long chain of RX/TX-only paths w/o the actual rules.

This patch aims to handle this issue.

RX and TX matchers are now handled separately: matcher connection in the
matchers chain is split into two separate lists: RX only and TX only.
when a new matcher is created, it is initially created 'detached' - its
RX/TX members are not inserted into the table's matcher list.
When an actual rule is added, only its appropriate RX or TX nic matchers
are then added to the table's nic matchers list and inserted into its
place in the chain of matchers.
I.e., if the rule that is being added is an RX-only rule, only the RX
part of the matcher will be connected to the chain, while TX part of the
matcher remains detached and doesn't prolong the TX chain of the matchers.

Same goes for rule deletion: when the last RX/TX rule of the nic matcher
is destroyed, the nic matcher is removed from its list.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Match on geneve_tlv_option_0_exist field on devices that support STEv1.

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Tunnel headers are generic encapsulation headers, applies for all
tunneling protocols identified by the device native parser or by the
programmable parser, this support will enable raw matching headers 0 and 1.

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Add misc5 match params to enable matching tunnel headers.

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>

Add support for misc5 match parameter as per HW spec, this will allow
matching on tunnel_header fields.

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Add WARN_ON_ONCE on refcount checks in SW steering object destructors

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Add support for a new destination type - UPLINK.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Extend mlx5 debugfs support to present Software Steering resources:
dr_domain including it's tables, matchers and rules.
The interface is read-only. While dump is being presented, new steering
rules cannot be inserted/deleted.

The steering information is dumped in the CSV form with the following
format:

    <object_type>,<object_ID>, <object_info>,...,<object_info>

This data can be read at the following path:

    /sys/kernel/debug/mlx5/<BDF>/steering/fdb/<domain_handle>

Example:

    # cat /sys/kernel/debug/mlx5/0000:82:00.0/steering/fdb/dmn_000018644
    3100,0x55caa4621c50,0xee802,4,65533
    3101,0x55caa4621c50,0xe0100008

Changes in V2:
 - Reduce temp hex buffer size and avoid unnecessary memset
 - Use bin2hex() instead of DIY loop
 - Don't check debugfs functions return values

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Add the reserved fields to dr_match_param and arrange
as mlx5_ifc_dr_match_param_bits.

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>

Allow only legal values for flex parser ID - values from 0 to 7.
For other values skip the parser, and as a result the matcher creation
will fail for using invalid flex parser ID.

Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

In dr_types structs, some list fields are list heads, and some
are just list nodes that are stored on the other structs' lists.
Rename the appropriate list field to reflect this distinction.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Macros prefix should be capital letters - fix the prefix in
mlx5_FLEX_PARSER_MPLS_OVER_UDP_ENABLED.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

The error code of nic matcher init functions wasn't checked.
This patch improves the matcher init function and fix error flow bug:
the handling of match parameter is moved into a separate function
and error flow is simplified.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

Fix typo in a comment in trie_update_elem().

Signed-off-by: Leon Huayra <hffilwlqm@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211229144422.70339-1-hffilwlqm@gmail.com

1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
2. Add helper for handling non-lineral port <-> reg mappings.
3. Add support for 12 B LED reg blocks on BCM4908 (different layout)

Complete support for LEDs setup will be implemented once Linux receives
a proper design & implementation for "hardware" LEDs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d64c2a76

 ("staging: irda: remove the irda network stack and
drivers") removes the config IRDA.

Remove the remaining references to this non-existing config in the network
header files.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211229113620.19368-1-lukas.bulwahn@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Variable i is being assigned a value that is never read, the
assignment is redundant and can be removed. Cleans up clang-scan
build warning:

drivers/nfc/st21nfca/i2c.c:319:4: warning: Value stored to 'i'
is never read [deadcode.DeadStores]
                        i = 0;

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211230161230.428457-1-colin.i.king@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The packet access instructions are a convoluted leftover from classic
BPF.  Move them last past the much more important atomic operations,
and improve the rendering of the code example.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211223101906.977624-5-hch@lst.de