It's useful to get testing on these features on various boards (e.g., on
KernelCI), and (when they're working) the ramoops feature is extremely
helpful for debugging live systems.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig

Pull "Enable SATA support found on DA850 SoC" from Sekhar Nori:

* tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable SATA modules

Merge tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Pull "Allwinner defconfig changes for 4.11" from Maxime Ripard:

A single patch to enable the thermal DT support in sunxi_defconfig

* tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Add CONFIG_THERMAL_OF

Add the da850-ahci driver to davinci defconfig.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Enable the NAND framework and the Denali NAND controller driver.
This NAND controller is used on UniPhier SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable the block layer support for MTD devices.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

i.MX defconfig updates for 4.11:
 - Select wireless extensions option for imx_v6_v7_defconfig, so that
   wireless works out of box with userspace tools such as 'iwconfig'.
 - Enable EXT4 filesystem support for vf610m4_defconfig.

* tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux

:
  ARM: vf610m4: defconfig: enable EXT4 filesystem
  ARM: imx_v6_v7_defconfig: Select wireless extensions option

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-defconfig-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig

STM32 defconfig updates for v4.11, round 1.

Highlights:
----------
 - Enable ADC
 - Enable RTC

* tag 'stm32-defconfig-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32

:
  ARM: configs: stm32: Add RTC support in STM32 defconfig
  ARM: configs: stm32: enable ADC driver

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: hisilicon: defconfig updates for 4.11

- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig

* tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi

:
  arm64: defconfig: Enable NUMA and NUMA_BALANCING
  arm64: defconfig: enable SMMUv3 config

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Few omap2plus_defconfig changes for v4.11 merge window:

- Switch to use LIS3LV02DL IIO driver instead of the
  LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
  warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
  least on phyCORE-AM335x

* tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

:
  ARM: omap2plus_defconfig: Enable support for RTC M41T80
  ARM: omap2plus_defconfig: Enable support for micrell phys
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  ARM: defconfig: omap2plus: switch LIS3LV02DL driver

Signed-off-by: Olof Johansson <olof@lixom.net>

Import a minimal defconfig for tango4 boards.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.11/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig

Enable config options for DaVinci
VPIF, LCDC, PWM, Pull up/down pinconf
driver and IIO in davinci_all_defconfig

* tag 'davinci-for-v4.11/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci

:
  ARM: davinci_all_defconfig: enable iio
  ARM: davinci_all_defconfig: Enable PWM modules
  ARM: davinci_all_defconfig: enable DA8xx pinconf
  ARM: davinci_all_defconfig: enable pwm-beeper
  ARM: davinci_all_defconfig: enable dumb vga-dac drm bridge
  ARM: davinci_all_defconfig: enable video capture as modules

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-defconfig-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig

Qualcomm ARM Based defconfig Updates for v4.11

* Enable APQ8060 Dragonboard related devices
* Enable AHCI, PCIE, USB, thermal sensors, and ATL1C related configs
* Enable RPM/RPM-SMD clocks

* tag 'qcom-defconfig-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux

:
  ARM: defconfig: qcom: add APQ8060 DragonBoard devices
  ARM: qcom_defconfig: enable thermal sensors
  ARM: qcom_defconfig: add ahci configs
  ARM: qcom_defconfig: add pcie and atl1c ethernet configs
  ARM: qcom_defconfig: add usb related configs
  ARM: qcom_defconfig: Enable RPM/RPM-SMD clocks

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_config_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

ARM: Keystone config support for 4.11

 - Enable Reset controller and on chip MSM RAM support.

* tag 'keystone_config_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone

:
  ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
  ARM: configs: keystone: Enable Generic on-chip SRAM driver

Signed-off-by: Olof Johansson <olof@lixom.net>

The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported
by the M41T80 driver. Enabled it so make the RTC support on the SoM
available.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The phyCORE-AM335x SoM with PCM-953 carrierboard has a
KSZ9021 phy mounted. To add support for this we need to enable
the micrell phy driver in the config.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable EXT4_FS to have rootfs in EXT[2-4].

Other changes are result of savedefconfig keeping minimal config (even
without enabling EXT4_FS, these would be present).

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

We have more than four uarts on some SoCs and that can cause
noise with errors while booting.

Signed-off-by: Tony Lindgren <tony@atomide.com>

Since much more arm64 SoCs with numa nodes, it's better to enable
NUMA and NUMA_BALANCING to improve the performance on test.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This enables the iio subsystem. This will be used by LEGO MINDSTORMS EV3,
which has an ADS7957 chip.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The Keystone 2 family of SoCs will use various Reset Controller
drivers for managing the resets of remote processor devices like
DSPs on the SoC, so select the ARCH_HAS_RESET_CONTROLLER option
by default to enable the Reset framework.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

Merge tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig

Aspeed defconfig updates for 4.11

Just the one commit that updates our defconfigs with network (ftgmac100
and ncsi), bt ipmi, gpio and ncsi.

* tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed

:
  ARM: configs: Update Aspeed with new drivers

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

defconfig for 4.11:

 - Add driver support for the Axentia TSE-850

* tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

:
  ARM: sama5_defconfig: add support for the Axentia TSE-850 board

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Samsung defconfig update for v4.11:
1. Cleanup from old MACHs in s5pv210.
2. Enable IP_MULTICAST for libnss-mdns.

* tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux

:
  ARM: exynos_defconfig: Enable IP multicast
  ARM: s5pv210_defconfig: Remove old MACHs

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig

SoCFPGA defconfig updates for v4.11
- enables Marvell PHY support
- enable MTD(I2C EEPROM), and NAND support
- enable SPI, RTC and LED support
- enables OF CONFIGFS to support DTS overlays
- enables more FS options
- enables A10 hwmon support

* tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

:
  ARM: socfpga_defconfig: update defconfig for SoCFPGA

Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds STM32 RTC support in stm32_defconfig file.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:

- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
  trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
  accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
  BMP085 pressure sensor

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables thermal sensors and QFPROM support for qcom platforms.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables configs required to get SATA functionality working on
IFC6410 board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Enable support for clocks, controlled by the RPM processor on
Qualcomm platforms.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

The Axentia TSE-850 is a SAMA5D3-based device designed to generate
FM subcarrier signals.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux,
and IPMI BT. Enable these for both g4 and g5 platforms.

Signed-off-by: Joel Stanley <joel@jms.id.au>

This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO
MINDSTORMS EV3.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

This enables the DA8xx pinconf driver by default. It is needed by LEGO
MINDSTORMS EV3.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Renesas ARM Based SoC Defconfig Updates for v4.11

Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input

* tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: multi_v7_defconfig: Enable r8a774[35] SoCs
  ARM: shmobile: defconfig: Enable r8a774[35] SoCs
  ARM: shmobile: defconfig: Enable CMA for DMA
  ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604

Signed-off-by: Olof Johansson <olof@lixom.net>

The PXA defconfig compiles the legacy MPU3050 driver as a module,
but the device does not appear in device trees nor board files, so
remove this from the defconfig assuming it was a mistake to add it
in the first place.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>