- Feb 22, 2022
-
-
Russell King (Oracle) authored
Populate the supported interfaces and MAC capabilities for the Broadcom B53 DSA switches in preparation to using these for the generic validation functionality. The interface modes are derived from: - b53_serdes_phylink_validate() - SRAB mux configuration Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
I've stared at this if() statement for a while trying to work out if it really does correspond with the comment above, and it does seem to. However, let's make it more readable and phrase it in the same way as the comment. Also add a FIXME into the comment - we appear to deny Gigabit modes for 802.3z interface modes, but 802.3z interface modes only operate at gigabit and above. Reviewed-by:
-
Dan Carpenter authored
This code dereferences "skb" after calling dev_kfree_skb(). Fixes: 2dc95a4d ("net: Add dm9051 driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220221105440.GA10045@kili Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Juhee Kang authored
In hsr, lockdep_is_held() is needed for rcu_dereference_bh_check(). But if lockdep is not enabled, lockdep_is_held() causes a build error: ERROR: modpost: "lockdep_is_held" [net/hsr/hsr.ko] undefined! Thus, this patch solved by adding lockdep_hsr_is_held(). This helper function calls the lockdep_is_held() when lockdep is enabled, and returns 1 if not defined. Fixes: e7f27420 ("net: hsr: fix suspicious RCU usage warning in hsr_node_get_first()") Reported-by:Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Juhee Kang <claudiajkang@gmail.com> Link: https://lore.kernel.org/r/20220220153250.5285-1-claudiajkang@gmail.com Signed-off-by:
-
- Feb 21, 2022
-
-
David S. Miller authored
Rakesh Babu Saladi says: ==================== RVU AF and NETDEV drivers' PTP updates. Patch 1: Add suppot such that RVU drivers support new timestamp format. Patch 2: This patch adds workaround for PTP errata. Changes made from v1 to v2 1. CC'd Richard Cochran to review PTP related patches. 2. Removed a patch from the old patch series. Will submit the removed patch separately. ==================== Signed-off-by: -
Naveen Mamindlapalli authored
This patch adds workaround for PTP errata given below. 1. At the time of 1 sec rollover of nano-second counter, the nano-second counter is set to 0. However, it should be set to (existing counter_value - 10^9). This leads to an accumulating error in the timestamp value with each sec rollover. 2. Additionally, the nano-second counter currently is rolling over at 'h3B9A_C9FF. It should roll over at 'h3B9A_CA00. The workaround for issue #1 is to speed up the ptp clock by adjusting PTP_CLOCK_COMP register to the desired value to compensate for the nanoseconds lost per each second. The workaround for issue #2 is to slow down the ptp clock such that the rollover occurs at ~1sec. Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by:
-
Naveen Mamindlapalli authored
The cn10k hardware ptp timestamp format has been modified primarily to support 1-step ptp clock. The 64-bit timestamp used by hardware is split into two 32-bit fields, the upper one holds seconds, the lower one nanoseconds. A new register (PTP_CLOCK_SEC) has been added that returns the current seconds value. The nanoseconds register PTP_CLOCK_HI resets after every second. The cn10k RPM block provides Rx/Tx timestamps to the NIX block using the new timestamp format. The software can read the current timestamp in nanoseconds by reading both PTP_CLOCK_SEC & PTP_CLOCK_HI registers. This patch provides support for new timestamp format. Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== bonding: add IPv6 NS/NA monitor support This patch add bond IPv6 NS/NA monitor support. A new option ns_ip6_target is added, which is similar with arp_ip_target. The IPv6 NS/NA monitor will take effect when there is a valid IPv6 address. Both ARP monitor and NS monitor will working at the same time. A new extra storage field is added to struct bond_opt_value for IPv6 support. Function bond_handle_vlan() is split from bond_arp_send() for both IPv4/IPv6 usage. To alloc NS message and send out. ndisc_ns_create() and ndisc_send_skb() are exported. v1 -> v2: 1. remove sysfs entry[1] and only keep netlink support. RFC -> v1: 1. define BOND_MAX_ND_TARGETS as BOND_MAX_ARP_TARGETS 2. adjust for reverse xmas tree ordering of local variables 3. remove bond_do_ns_validate() 4. add extra field for bond_opt_value 5. set IS_ENABLED(CONFIG_IPV6) for IPv6 codes [1] https://lore.kernel.org/netdev/8863.1645071997@famine ==================== Signed-off-by:
-
Hangbin Liu authored
This patch add a new bonding option ns_ip6_target, which correspond to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS request to determine the health of the link. For other related options like the validation, we still use arp_validate, and will change to ns_validate later. Note: the sysfs configuration support was removed based on https://lore.kernel.org/netdev/8863.1645071997@famine Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Add a new bonding parameter ns_targets to store IPv6 address. Add required bond_ns_send/rcv functions first before adding IPv6 address option setting. Add two functions bond_send/rcv_validate so we can send/recv ARP and NS at the same time. Signed-off-by:
-
Hangbin Liu authored
Adding an extra storage field for bond_opt_value so we can set large bytes of data for bonding options in future, e.g. IPv6 address. Define a new call bond_opt_initextra(). Also change the checking order of __bond_opt_init() and check values first. Signed-off-by:
-
Hangbin Liu authored
Function bond_handle_vlan() is split from bond_arp_send() for later IPv6 usage. Signed-off-by:
-
Hangbin Liu authored
This patch separate NS message allocation steps from ndisc_send_ns(), so it could be used in other places, like bonding, to allocate and send IPv6 NS message. Also export ndisc_send_skb() and ndisc_ns_create() for later bonding usage. Signed-off-by:
-
Christophe JAILLET authored
'max_rx_len' can be up to GBETH_RX_BUFF_MAX (i.e. 8192) (see 'gbeth_hw_info'). The default value of 'num_rx_ring' can be BE_RX_RING_SIZE (i.e. 1024). So this loop can allocate 8 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
-
Christophe JAILLET authored
Use skb_put_zero() instead of hand-writing it. This saves a few lines of code and is more readable. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== ipv4: Invalidate neighbour for broadcast address upon address addition Patch #1 solves a recently reported issue [1]. See detailed description in the changelog. Patch #2 adds a matching test case. Targeting at net-next since as far as I can tell this use case never worked. There are no regressions in fib_tests.sh with this change: # ./fib_tests.sh ... Tests passed: 186 Tests failed: 0 [1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/ ==================== Signed-off-by:
-
Ido Schimmel authored
Test that resolved neighbours for IPv4 broadcast addresses are unaffected by the configuration of matching broadcast routes, whereas unresolved neighbours are invalidated. Without previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [FAIL] TEST: Unresolved neighbour for network broadcast address [FAIL] Tests passed: 2 Tests failed: 2 With previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [ OK ] TEST: Unresolved neighbour for network broadcast address [ OK ] Tests passed: 4 Tests failed: 0 Signed-off-by:Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
In case user space sends a packet destined to a broadcast address when a matching broadcast route is not configured, the kernel will create a unicast neighbour entry that will never be resolved [1]. When the broadcast route is configured, the unicast neighbour entry will not be invalidated and continue to linger, resulting in packets being dropped. Solve this by invalidating unresolved neighbour entries for broadcast addresses after routes for these addresses are internally configured by the kernel. This allows the kernel to create a broadcast neighbour entry following the next route lookup. Another possible solution that is more generic but also more complex is to have the ARP code register a listener to the FIB notification chain and invalidate matching neighbour entries upon the addition of broadcast routes. It is also possible to wave off the issue as a user space problem, but it seems a bit excessive to expect user space to be that intimately familiar with the inner workings of the FIB/neighbour kernel code. [1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/ Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Christophe Leroy authored
Open coded calculation can be avoided and replaced by the equivalent csum_replace_by_diff() and csum_sub(). Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
- Feb 20, 2022
-
-
David S. Miller authored
Menglong Dong says: ==================== net: add skb drop reasons to TCP packet receive In the commit c504e5c2 ("net: skb: introduce kfree_skb_reason()"), we added the support of reporting the reasons of skb drops to kfree_skb tracepoint. And in this series patches, reasons for skb drops are added to TCP layer (both TCPv4 and TCPv6 are considered). Following functions are processed: tcp_v4_rcv() tcp_v6_rcv() tcp_v4_inbound_md5_hash() tcp_v6_inbound_md5_hash() tcp_add_backlog() tcp_v4_do_rcv() tcp_v6_do_rcv() tcp_rcv_established() tcp_data_queue() tcp_data_queue_ofo() The functions we handled are mostly for packet ingress, as skb drops hardly happens in the egress path of TCP layer. However, it's a little complex for TCP state processing, as I find that it's hard to report skb drop reasons to where it is freed. For example, when skb is dropped in tcp_rcv_state_process(), the reason can be caused by the call of tcp_v4_conn_request(), and it's hard to return a drop reason from tcp_v4_conn_request(). So such cases are skipped for this moment. Following new drop reasons are introduced (what they mean can be see in the document for them): /* SKB_DROP_REASON_TCP_MD5* corresponding to LINUX_MIB_TCPMD5* */ SKB_DROP_REASON_TCP_MD5NOTFOUND SKB_DROP_REASON_TCP_MD5UNEXPECTED SKB_DROP_REASON_TCP_MD5FAILURE SKB_DROP_REASON_SOCKET_BACKLOG SKB_DROP_REASON_TCP_FLAGS SKB_DROP_REASON_TCP_ZEROWINDOW SKB_DROP_REASON_TCP_OLD_DATA SKB_DROP_REASON_TCP_OVERWINDOW /* corresponding to LINUX_MIB_TCPOFOMERGE */ SKB_DROP_REASON_TCP_OFOMERGE Here is a example to get TCP packet drop reasons from ftrace: $ echo 1 > /sys/kernel/debug/tracing/events/skb/kfree_skb/enable $ cat /sys/kernel/debug/tracing/trace $ <idle>-0 [036] ..s1. 647.428165: kfree_skb: skbaddr=000000004d037db6 protocol=2048 location=0000000074cd1243 reason: NO_SOCKET $ <idle>-0 [020] ..s2. 639.676674: kfree_skb: skbaddr=00000000bcbfa42d protocol=2048 location=00000000bfe89d35 reason: PROTO_MEM From the reason 'PROTO_MEM' we can know that the skb is dropped because the memory configured in net.ipv4.tcp_mem is up to the limition. Changes since v2: - remove the 'inline' of tcp_drop() in the 1th patch, as Jakub suggested Changes since v1: - enrich the document for this series patches in the cover letter, as Eric suggested - fix compile warning report by Jakub in the 6th patch - let NO_SOCKET trump the XFRM failure in the 2th and 3th patches ==================== Signed-off-by:
-
Menglong Dong authored
Replace tcp_drop() used in tcp_data_queue_ofo with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_OFOMERGE Reviewed-by:
Mengen Sun <mengensun@tencent.com> Reviewed-by:
Hao Peng <flyingpeng@tencent.com> Signed-off-by:
Menglong Dong <imagedong@tencent.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Menglong Dong authored
Replace tcp_drop() used in tcp_data_queue() with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_ZEROWINDOW SKB_DROP_REASON_TCP_OLD_DATA SKB_DROP_REASON_TCP_OVERWINDOW SKB_DROP_REASON_TCP_OLD_DATA is used for the case that end_seq of skb less than the left edges of receive window. (Maybe there is a better name?) Reviewed-by:
-
Menglong Dong authored
Replace tcp_drop() used in tcp_rcv_established() with tcp_drop_reason(). Following drop reasons are added: SKB_DROP_REASON_TCP_FLAGS Reviewed-by:
-
Menglong Dong authored
Replace kfree_skb() used in tcp_v4_do_rcv() and tcp_v6_do_rcv() with kfree_skb_reason(). Reviewed-by:
-
Menglong Dong authored
Pass the address of drop_reason to tcp_add_backlog() to store the reasons for skb drops when fails. Following drop reasons are introduced: SKB_DROP_REASON_SOCKET_BACKLOG Reviewed-by:
-
Menglong Dong authored
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this function fails. Therefore, the drop reason can be passed to kfree_skb_reason() when the skb needs to be freed. Following drop reasons are added: SKB_DROP_REASON_TCP_MD5NOTFOUND SKB_DROP_REASON_TCP_MD5UNEXPECTED SKB_DROP_REASON_TCP_MD5FAILURE SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5* Reviewed-by:
-
Menglong Dong authored
Replace kfree_skb() used in tcp_v6_rcv() with kfree_skb_reason(). Reviewed-by:
-
Menglong Dong authored
Use kfree_skb_reason() for some path in tcp_v4_rcv() that missed before, including: SKB_DROP_REASON_SOCKET_FILTER SKB_DROP_REASON_XFRM_POLICY Reviewed-by:
-
Menglong Dong authored
For TCP protocol, tcp_drop() is used to free the skb when it needs to be dropped. To make use of kfree_skb_reason() and pass the drop reason to it, introduce the function tcp_drop_reason(). Meanwhile, make tcp_drop() an inline call to tcp_drop_reason(). Reviewed-by:
-
Volodymyr Mytnyk authored
smatch warnings: drivers/net/ethernet/marvell/prestera/prestera_acl.c:103 prestera_acl_chain_to_client() error: buffer overflow 'client_map' 3 <= 3 prestera_acl_chain_to_client(u32 chain_index, ...) ... u32 client_map[] = { PRESTERA_HW_COUNTER_CLIENT_LOOKUP_0, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_1, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_2 }; if (chain_index > ARRAY_SIZE(client_map)) ... Fixes: fa5d824c ("net: prestera: acl: add multi-chain support offload") Reported-by:kernel test robot <lkp@intel.com> Reported-by:
Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by:
-
Ahmad Fatoum authored
The KSZ9477 SPI driver already has support for the KSZ8563. The same switch chip can also be managed via i2c and we have an KSZ9477 I2C driver, but that one lacks the relevant compatible entry. Add it. DT bindings already describe this compatible. Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
These two error paths need to release_sock(sk) before returning. Fixes: a6a6fe27 ("net/smc: Dynamic control handshake limitation by socket options") Signed-off-by:
D. Wythe <alibuda@linux.alibaba.com> Signed-off-by:
-
Oleksij Rempel authored
Provide access to HW offloaded packets over stats64 interface. The rx/tx_bytes values needed some fixing since HW is accounting size of the Ethernet frame together with FCS. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== net: phylink: remove pcs_poll This small series removes the now unused pcs_poll members from DSA and phylink. "git grep pcs_poll drivers/net/ net/" on net-next confirms that the only places that reference this are in DSA core code and phylink code: drivers/net/phy/phylink.c: if (pl->config->pcs_poll || pcs->poll) drivers/net/phy/phylink.c: poll |= pl->config->pcs_poll; net/dsa/port.c: dp->pl_config.pcs_poll = ds->pcs_poll; ==================== Signed-off-by: -
Russell King (Oracle) authored
phylink_config's pcs_poll is no longer used, let's get rid of it. Signed-off-by:
-
Russell King (Oracle) authored
With drivers converted over to using phylink PCS, there is no need for the struct dsa_switch member "pcs_poll" to exist anymore - there is a flag in the struct phylink_pcs which indicates whether this PCS needs to be polled which supersedes this. Signed-off-by:
-
Juhee Kang authored
When hsr_create_self_node() calls hsr_node_get_first(), the suspicious RCU usage warning is occurred. The reason why this warning is raised is the callers of hsr_node_get_first() use rcu_read_lock_bh() and other different synchronization mechanisms. Thus, this patch solved by replacing rcu_dereference() with rcu_dereference_bh_check(). The kernel test robot reports: [ 50.083470][ T3596] ============================= [ 50.088648][ T3596] WARNING: suspicious RCU usage [ 50.093785][ T3596] 5.17.0-rc3-next-20220208-syzkaller #0 Not tainted [ 50.100669][ T3596] ----------------------------- [ 50.105513][ T3596] net/hsr/hsr_framereg.c:34 suspicious rcu_dereference_check() usage! [ 50.113799][ T3596] [ 50.113799][ T3596] other info that might help us debug this: [ 50.113799][ T3596] [ 50.124257][ T3596] [ 50.124257][ T3596] rcu_scheduler_active = 2, debug_locks = 1 [ 50.132368][ T3596] 2 locks held by syz-executor.0/3596: [ 50.137863][ T3596] #0: ffffffff8d3357e8 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x3be/0xb80 [ 50.147470][ T3596] #1: ffff88807ec9d5f0 (&hsr->list_lock){+...}-{2:2}, at: hsr_create_self_node+0x225/0x650 [ 50.157623][ T3596] [ 50.157623][ T3596] stack backtrace: [ 50.163510][ T3596] CPU: 1 PID: 3596 Comm: syz-executor.0 Not tainted 5.17.0-rc3-next-20220208-syzkaller #0 [ 50.173381][ T3596] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 50.183623][ T3596] Call Trace: [ 50.186904][ T3596] <TASK> [ 50.189844][ T3596] dump_stack_lvl+0xcd/0x134 [ 50.194640][ T3596] hsr_node_get_first+0x9b/0xb0 [ 50.199499][ T3596] hsr_create_self_node+0x22d/0x650 [ 50.204688][ T3596] hsr_dev_finalize+0x2c1/0x7d0 [ 50.209669][ T3596] hsr_newlink+0x315/0x730 [ 50.214113][ T3596] ? hsr_dellink+0x130/0x130 [ 50.218789][ T3596] ? rtnl_create_link+0x7e8/0xc00 [ 50.223803][ T3596] ? hsr_dellink+0x130/0x130 [ 50.228397][ T3596] __rtnl_newlink+0x107c/0x1760 [ 50.233249][ T3596] ? rtnl_setlink+0x3c0/0x3c0 [ 50.238043][ T3596] ? is_bpf_text_address+0x77/0x170 [ 50.243362][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.248219][ T3596] ? unwind_next_frame+0xee1/0x1ce0 [ 50.253605][ T3596] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 50.259669][ T3596] ? __sanitizer_cov_trace_cmp4+0x1c/0x70 [ 50.265423][ T3596] ? is_bpf_text_address+0x99/0x170 [ 50.270819][ T3596] ? kernel_text_address+0x39/0x80 [ 50.275950][ T3596] ? __kernel_text_address+0x9/0x30 [ 50.281336][ T3596] ? unwind_get_return_address+0x51/0x90 [ 50.286975][ T3596] ? create_prof_cpu_mask+0x20/0x20 [ 50.292178][ T3596] ? arch_stack_walk+0x93/0xe0 [ 50.297172][ T3596] ? kmem_cache_alloc_trace+0x42/0x2c0 [ 50.302637][ T3596] ? rcu_read_lock_sched_held+0x3a/0x70 [ 50.308194][ T3596] rtnl_newlink+0x64/0xa0 [ 50.312524][ T3596] ? __rtnl_newlink+0x1760/0x1760 [ 50.317545][ T3596] rtnetlink_rcv_msg+0x413/0xb80 [ 50.322631][ T3596] ? rtnl_newlink+0xa0/0xa0 [ 50.327159][ T3596] netlink_rcv_skb+0x153/0x420 [ 50.331931][ T3596] ? rtnl_newlink+0xa0/0xa0 [ 50.336436][ T3596] ? netlink_ack+0xa80/0xa80 [ 50.341095][ T3596] ? netlink_deliver_tap+0x1a2/0xc40 [ 50.346532][ T3596] ? netlink_deliver_tap+0x1b1/0xc40 [ 50.351839][ T3596] netlink_unicast+0x539/0x7e0 [ 50.356633][ T3596] ? netlink_attachskb+0x880/0x880 [ 50.361750][ T3596] ? __sanitizer_cov_trace_const_cmp8+0x1d/0x70 [ 50.368003][ T3596] ? __sanitizer_cov_trace_const_cmp8+0x1d/0x70 [ 50.374707][ T3596] ? __phys_addr_symbol+0x2c/0x70 [ 50.379753][ T3596] ? __sanitizer_cov_trace_cmp8+0x1d/0x70 [ 50.385568][ T3596] ? __check_object_size+0x16c/0x4f0 [ 50.390859][ T3596] netlink_sendmsg+0x904/0xe00 [ 50.395715][ T3596] ? netlink_unicast+0x7e0/0x7e0 [ 50.400722][ T3596] ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70 [ 50.407003][ T3596] ? netlink_unicast+0x7e0/0x7e0 [ 50.412119][ T3596] sock_sendmsg+0xcf/0x120 [ 50.416548][ T3596] __sys_sendto+0x21c/0x320 [ 50.421052][ T3596] ? __ia32_sys_getpeername+0xb0/0xb0 [ 50.426427][ T3596] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 50.432721][ T3596] ? __context_tracking_exit+0xb8/0xe0 [ 50.438188][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.443041][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.447902][ T3596] __x64_sys_sendto+0xdd/0x1b0 [ 50.452759][ T3596] ? lockdep_hardirqs_on+0x79/0x100 [ 50.457964][ T3596] ? syscall_enter_from_user_mode+0x21/0x70 [ 50.464150][ T3596] do_syscall_64+0x35/0xb0 [ 50.468565][ T3596] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 50.474452][ T3596] RIP: 0033:0x7f3148504e1c [ 50.479052][ T3596] Code: fa fa ff ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 20 fb ff ff 48 8b [ 50.498926][ T3596] RSP: 002b:00007ffeab5f2ab0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 50.507342][ T3596] RAX: ffffffffffffffda RBX: 00007f314959d320 RCX: 00007f3148504e1c [ 50.515393][ T3596] RDX: 0000000000000048 RSI: 00007f314959d370 RDI: 0000000000000003 [ 50.523444][ T3596] RBP: 0000000000000000 R08: 00007ffeab5f2b04 R09: 000000000000000c [ 50.531492][ T3596] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 50.539455][ T3596] R13: 00007f314959d370 R14: 0000000000000003 R15: 0000000000000000 Fixes: 4acc45db ("net: hsr: use hlist_head instead of list_head for mac addresses") Reported-by:<syzbot+f0eb4f3876de066b128c@syzkaller.appspotmail.com> Signed-off-by:
-
Christophe JAILLET authored
Use kcalloc() instead of kmalloc_array() and a loop to set all the values of the array to NULL. While at it, remove a duplicated assignment to 'scq->num_entries'. Signed-off-by:
-
David S. Miller authored
Radu Bulie says: ==================== Provide direct access to 1588 one step register DPAA2 MAC supports 1588 one step timestamping. If this option is enabled then for each transmitted PTP event packet, the 1588 SINGLE_STEP register is accessed to modify the following fields: -offset of the correction field inside the PTP packet -UDP checksum update bit, in case the PTP event packet has UDP encapsulation These values can change any time, because there may be multiple PTP clients connected, that receive various 1588 frame types: - L2 only frame - UDP / Ipv4 - UDP / Ipv6 - other The current implementation uses dpni_set_single_step_cfg to update the SINLGE_STEP register. Using an MC command on the Tx datapath for each transmitted 1588 message introduces high delays, leading to low throughput and consequently to a small number of supported PTP clients. Besides these, the nanosecond correction field from the PTP packet will contain the high delay from the driver which together with the originTimestamp will render timestamp values that are unacceptable in a GM clock implementation. This patch series replaces the dpni_set_single_step_cfg function call from the Tx datapath for 1588 messages (when one step timestamping is enabled) with a callback that either implements direct access to the SINGLE_STEP register, eliminating the overhead caused by the MC command that will need to be dispatched by the MC firmware through the MC command portal interface or falls back to the dpni_set_single_step_cfg in case the MC version does not have support for returning the single step register base address. In other words all the delay introduced by dpni_set_single_step_cfg function will be eliminated (if MC version has support for returning the base address of the single step register), improving the egress driver performance for PTP packets when single step timestamping is enabled. The first patch adds a new attribute that contains the base address of the SINGLE_STEP register. It will be used to directly update the register on the Tx datapath. The second patch updates the driver such that the SINGLE_STEP register is either accessed directly if MC version >= 10.32 or is accessed through dpni_set_single_step_cfg command when 1588 messages are transmitted. Changes in v2: - move global function pointer into the driver's private structure in 2/2 - move repetitive code outside the body of the callback functions in 2/2 - update function dpaa2_ptp_onestep_reg_update_method and remove goto statement from non error path in 2/2 Changes in v3: - remove static storage class specifier from within the structure in 2/2 ==================== Signed-off-by: -
Radu Bulie authored
DPAA2 MAC supports 1588 one step timestamping. If this option is enabled then for each transmitted PTP event packet, the 1588 SINGLE_STEP register is accessed to modify the following fields: -offset of the correction field inside the PTP packet -UDP checksum update bit, in case the PTP event packet has UDP encapsulation These values can change any time, because there may be multiple PTP clients connected, that receive various 1588 frame types: - L2 only frame - UDP / Ipv4 - UDP / Ipv6 - other The current implementation uses dpni_set_single_step_cfg to update the SINLGE_STEP register. Using an MC command on the Tx datapath for each transmitted 1588 message introduces high delays, leading to low throughput and consequently to a small number of supported PTP clients. Besides these, the nanosecond correction field from the PTP packet will contain the high delay from the driver which together with the originTimestamp will render timestamp values that are unacceptable in a GM clock implementation. This patch updates the Tx datapath for 1588 messages when single step timestamp is enabled and provides direct access to SINGLE_STEP register, eliminating the overhead caused by the dpni_set_single_step_cfg MC command. MC version >= 10.32 implements this functionality. If the MC version does not have support for returning the single step register base address, the driver will use dpni_set_single_step_cfg command for updates operations. All the delay introduced by dpni_set_single_step_cfg function will be eliminated (if MC version has support for returning the base address of the single step register), improving the egress driver performance for PTP packets when single step timestamping is enabled. Before these changes the maximum throughput for 1588 messages with single step hardware timestamp enabled was around 2000pps. After the updates the throughput increased up to 32.82 Mbps / 46631.02 pps. Signed-off-by:
Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by:
-
