- Dec 19, 2008
-
-
Ben Dooks authored
Add the fourth UART definition for the S3C2443, and at the same time fixup the problems caused by the enlarging of the UART array in the previous commits. Signed-off-by:Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places in the kernel where it had been missed. This finishes fixing a long standing issue where S3C2443 and S3C64XX could not use the 4th UART Signed-off-by: -
Ben Dooks authored
Update the serial driver to handle the 4 ports of the S3C2443 and S364XX series. Signed-off-by: -
Ben Dooks authored
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
-
- Dec 18, 2008
-
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
Add LCD frame buffer support for AT2440EVB board. Signed-off-by:
Ramax Lo <ramaxlo@gmail.com> Signed-off-by:
-
Ben Dooks authored
Add SD/MMC support for AT2440EVB board. Signed-off-by:
-
Ben Dooks authored
Add GPIO support to the SM501 on the Simtec Anubis, and then add the necessary updates for allowing the two gpio I2C busses to be used. Signed-off-by: -
Ben Dooks authored
Add Kconfig entries to allow more GPIO space to be specified depending on the machine(s) selected. Signed-off-by: -
Ben Dooks authored
Fix the name of the driver, as well as the fact we are not passing the number of chipselects to the driver. Signed-off-by: -
Ben Dooks authored
A common core driver for the S3C24XX ADC block so that the touchscreen, hwmon and any other drivers can share the resource. Signed-off-by:
-
- Dec 16, 2008
-
-
Ben Dooks authored
Add a configuration option to start the UART FIFOs during the decompressions sequence to improve boot time when the bootloader fails to enable the UART FIFOs. For example, the SMDK6410 UBoot 1.1.6 leaves the FIFOs off. Signed-off-by: -
Matt Hsu authored
Select the correct EINT configuration register when configuring the external interrupt level/edge type. Signed-off-by:
Matt Hsu <matt_hsu@openmoko.org> [ben-linux@fluff.org: description improvement] Signed-off-by:
-
Kyungmin Park authored
Correct the PLL field masks to ensure the PLL functions return the right value. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> [ben-linux@fluff.org: improve the description text] Signed-off-by:
-
Kyungmin Park authored
Fix the initialisation of the fifo data in the uncompression serial routines to ensure that if the FIFO is enabled, that the serial output is not corrupted. Signed-off-by:
-
Ben Dooks authored
The S3C64XX timer is running at the wrong rate due to the assumptions made in the timer initialisation about the way the pwm dividers work. This means that time on the S3C64XX runs twice as fast as it should. Fix the problem by moving to using the clk framework to setup the pwm timer clock muxes, as the pwm-clock code has all the necessary knowledge of how the timer clock inputs are routed. Signed-off-by: -
Ben Dooks authored
The S3C64XX series has a new TCFG divider setting to allow the clock directly through, which means that we need to update the pwm-clock code to cope with this. Add <mach/pwm-clock.h> containing the specific code to deal with the TCFG divider settings and provide any other per-arch data that the pwm-clock driver needs to function. Signed-off-by: -
Ben Dooks authored
Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: -
Ben Dooks authored
Add a standard helper to configure the LCD output pins for a 24BPP display with VSYNC/HSYNC/VDEN. Signed-off-by: -
Ben Dooks authored
Add a device definition for the new S3C framebuffer driver. Signed-off-by: -
Ben Dooks authored
Add device definition and support functions for the second i2c device (i2c1). If this is selected, the first i2c bus will become index 0 instead of index -1. Signed-off-by: -
Ben Dooks authored
Provide the initial register definitions for the newer style of framebuffer cores found in the Samsung SoCs such as S3C2450, S3C64XX. Signed-off-by: -
Ben Dooks authored
Fix the compilation of the SDHCI configuration/setup functions to depend on their respective configuration variables. Signed-off-by: -
Ben Dooks authored
Select the correct GPIO configuration function for channel 1 Signed-off-by: -
Ben Dooks authored
Add the Samsung SDHCI driver to the build. Signed-off-by: -
Ben Dooks authored
Add the new I2C driver and the EEPROM devices to the system, as well as update to the latest kernel. Signed-off-by: -
Ben Dooks authored
Add SDHCI channel 1. Signed-off-by: -
Ben Dooks authored
Fix the definition of the MMC0 register shift and mask in the CLKSRC register. Signed-off-by: -
Ben Dooks authored
The function s3c64xx_init_io was missing from <plat/cpu.h> and was masked by the SMDK6410 having an local definition. Fix by removing the SMDK6410 variant and adding it to the relevant <plat/cpu.h> file. Signed-off-by: -
Ben Dooks authored
Add a header to define setup functions for the i2c devices. Signed-off-by: -
Ben Dooks authored
Add the I2C devices on the SMDK6410. Signed-off-by: -
Ben Dooks authored
Add the second I2C channel on the SMDK6410. Signed-off-by: -
Ben Dooks authored
Add common gpio setup for i2c bus 1 on all current S3C64XX architectures. Signed-off-by: -
Ben Dooks authored
Add i2c bus 0 to the configuration Signed-off-by: -
Ben Dooks authored
Add the necessary device initialisation information for I2C device 0. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks N, O, P and Q. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks G, H, I and J. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks D, E and F. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks A, B and C. Signed-off-by:
-
