- Oct 08, 2020
-
-
Wolfram Sang authored
After the conversions of the reset routines, re-inserting SD cards didn't work anymore. Apply this temporary workaround to have working SD cards during the merge window. The issue will be fixed properly until the final release. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20201008092533.76588-1-wsa+renesas@sang-engineering.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
- Oct 07, 2020
-
-
Ben Chuang authored
Add CQHCI initialization and implement CQHCI operations for GL9763E. Use bit19 of the register (0x888) to decide whether to disable command queuing. If the bit is set, the command queuing will be disabled. Signed-off-by:
Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20201005105509.11343-1-ben.chuanggli@gmail.com Signed-off-by:
-
- Oct 05, 2020
-
-
Raul E Rangel authored
This change fixes HS400 tuning for devices with invalid presets. SDHCI presets are not currently used for eMMC HS/HS200/HS400, but are used for DDR52. The HS400 retuning sequence is: HS400->DDR52->HS->HS200->Perform Tuning->HS->HS400 This means that when HS400 tuning happens, we transition through DDR52 for a very brief period. This causes presets to be enabled unintentionally and stay enabled when transitioning back to HS200 or HS400. Some firmware has invalid presets, so we end up with driver strengths that can cause I/O problems. Fixes: 34597a3f ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by:Raul E Rangel <rrangel@chromium.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200928154718.1.Icc21d4b2f354e83e26e57e270dc952f5fe0b0a40@changeid Signed-off-by:
-
- Sep 28, 2020
-
-
Faiz Abbas authored
According to the SW tuning App note[1], tuning is required for all UHS speed modes. Tuning for SDR50 is not enabled in Capabilities by default so enable it from the CTL_CFG registers. [1] https://www.ti.com/lit/pdf/spract9 Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-7-faiz_abbas@ti.com Signed-off-by:
-
Faiz Abbas authored
With the new SW tuning App note[1], a custom tuning algorithm is required for eMMC HS200, HS400 and SD card UHS modes. The algorithm involves running through the 32 possible input tap delay values and sending the appropriate tuning command (CMD19/21) for each of them to get a fail or pass result for each of the values. Typically, the range will have a small contiguous failing window. Considering the tuning range as a circular buffer, the algorithm then sets a final tuned value directly opposite to the failing window. [1] https://www.ti.com/lit/pdf/spract9 Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-6-faiz_abbas@ti.com Signed-off-by:
-
Faiz Abbas authored
DLL need only be enabled for speed modes and clock frequencies at or above 50 MHz. For speed modes that don't enable the DLL, we need to configure a static input delay value. This involves reading an optional itap-del-sel-* value from the device tree and configuring it for the appropriate speed mode. With this addition, make sure that DLL is always switched off at the beginning of the set_clock() call to simplify configuration. This also removes the need for the dll_on member in struct sdhci_am654_data. Signed-off-by:
-
Faiz Abbas authored
Change hard coded array size value to depend on struct timing_data array size. Signed-off-by:
-
Faiz Abbas authored
Add documentation for input tap delay bindings. Signed-off-by:
-
Faiz Abbas authored
Convert sdhci-am654 documentation to yaml format. The new file sdhci-am654.yaml will inherit from mmc-controller.yaml. Signed-off-by:
-
Yangbo Lu authored
The bit ESDHC_PERIPHERAL_CLK_SEL to select using peripheral clock or platform clock is not able to be reset by SDHCI_RESET_ALL. So driver needs to initialize it as 1 or 0 once, to override the different value which may be configured in bootloader. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200927082304.9232-1-yangbo.lu@nxp.com Signed-off-by:
-
Randy Dunlap authored
Fix build errors for meson-gx-mmc.c when CONFIG_COMMON_CLK is not set/enabled. This can happen when COMPILE_TEST is set/enabled. ERROR: modpost: "clk_divider_ops" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "devm_clk_register" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "clk_mux_ops" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "__clk_get_name" [drivers/mmc/host/meson-gx-mmc.ko] undefined! Fixes: 54d84544 ("mmc: host: Enable compile testing of multiple drivers") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200925164323.29843-1-rdunlap@infradead.org Signed-off-by:
-
Ulf Hansson authored
-
Hans de Goede authored
Commit bedf9fc0 ("mmc: sdhci: Workaround broken command queuing on Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models because of it being broken due to what is believed to be a bug in the BIOS. It seems that the BIOS of some IRBIS models, including the IRBIS NB111 model has the same issue, so disable command queuing there too. Fixes: bedf9fc0 ("mmc: sdhci: Workaround broken command queuing on Intel GLK") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397 Reported-and-tested-by:
RussianNeuroMancer <russianneuromancer@ya.ru> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Kai-Heng Feng authored
After commit 6827ca57 ("memstick: rtsx_usb_ms: Support runtime power management"), removing module rtsx_usb_ms will be stuck. The deadlock is caused by powering on and powering off at the same time, the former one is when memstick_check() is flushed, and the later is called by memstick_remove_host(). Soe let's skip allocating card to prevent this issue. Fixes: 6827ca57 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by:
-
- Sep 25, 2020
-
-
Krzysztof Kozlowski authored
The struct of_device_id is not defined with !CONFIG_OF so its forward declaration should be hidden to as well. This should address clang compile warning: drivers/mmc/host/sdhci-s3c.c:464:34: warning: tentative array definition assumed to have one element Reported-by:
-
Krzysztof Kozlowski authored
Fix inconsistent indenting, reported by Smatch: drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting drivers/mmc/host/sdhci-sprd.c:390 sdhci_sprd_request_done() warn: inconsistent indenting Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The 'struct mmc_host *mmc' comes from drvdata set at the end of probe, so it cannot be NULL. The code already dereferences it few lines before the check with mmc_priv(). This also fixes smatch warning: drivers/mmc/host/moxart-mmc.c:692 moxart_remove() warn: variable dereferenced before check 'mmc' (see line 688) Reported-by:
-
Wolfram Sang authored
The MMC core has now a generic check if some tuning is in progress. Its protected area is a bit larger than the custom one in this driver but we concluded that this works equally well for the intended case. So, drop the local flag and switch to the generic one. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131042.92340-1-miaoqinglang@huawei.com Signed-off-by:
-
Wolfram Sang authored
Add documentation for mmc_hw_reset to make sure the intended use case is clear. Signed-off-by:
-
- Sep 24, 2020
-
-
Amey Narkhede authored
The MediaTek MMC driver uses pointer to get from private msdc_host structure to the generic mmc_host structure. However mmc_host always precedes msdc_host in memory so compute its address with a subtraction (which is cheaper than a dereference) using mmc_from_priv() and drop the extra pointer. Signed-off-by:
Amey Narkhede <ameynarkhede03@gmail.com> Link: https://lore.kernel.org/r/20200917192624.548720-1-ameynarkhede03@gmail.com Signed-off-by:
-
Amit Singh Tomar authored
The commit adds a new SoC specific compatible string "actions,s700-mmc" in combination with more generic string "actions,owl-mmc". Placement order of these strings should abide by the principle of "from most specific to most general". Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Amit Singh Tomar <amittomer25@gmail.com> Link: https://lore.kernel.org/r/1599801849-6071-1-git-send-email-amittomer25@gmail.com Signed-off-by:
-
- Sep 14, 2020
-
-
Wolfram Sang authored
Reorganize the code, so that the flag is always cleared independently of a good or bad case. Fixes: 97a7d87e ("mmc: core: add a 'doing_init_tune' flag and a 'mmc_doing_tune' helper") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200914112845.21855-1-wsa+renesas@sang-engineering.com Signed-off-by:
-
Ulf Hansson authored
-
Geert Uytterhoeven authored
If CONFIG_NO_DMA=y (e.g. Sun-3 allmodconfig): drivers/mmc/host/mmc_spi.c:1323:15: warning: return type defaults to ‘int’ [-Wreturn-type] static inline mmc_spi_dma_alloc(struct mmc_spi_host *host) { return 0; } ^~~~~~~~~~~~~~~~~ Fix this by adding the missing return type. Fixes: a395acf0 ("mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200914094243.3912-1-geert@linux-m68k.org Signed-off-by:
-
- Sep 11, 2020
-
-
Viresh Kumar authored
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/890ae5601594fca5de104695a682f4b6efbc631b.1599660554.git.viresh.kumar@linaro.org Signed-off-by:
-
- Sep 09, 2020
-
-
Wolfram Sang authored
Some R-Car Gen3 SoCs need some manual correction of timing parameters after the automatic tuning has finished but before next CMD13 is completed. This patch implements that by this state machine: - introducing a per-SoC correction table if needed - iff such a table exists, the 'fixup_request' callback is populated during probe - iff such a table exists, a runtime flag ('needs_adjust_hs400') is set when HS400 tuning was completed - the callback will check the runtime flag and enable the corrected manual mode if the flag is set and CMD13 is encountered - at the end of the enablement the runtime flag is cleared - iff the configuration flag is set, the manual mode will be disabled when HS400 gets downgraded There also some helper functions added to access the TMPPORT registers. The actual correction table is SoC and instance(!) specific and is added to the quirks struct. Signed-off-by:Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by:
-
Wolfram Sang authored
Sadly, due to HW bugs, we need a callback to work around issues just before completing the request. Signed-off-by:
-
- Sep 08, 2020
-
-
Ulf Hansson authored
MMC_S3C isn't ready yet to be built with COMPILE_TEST, hence drop it. Signed-off-by:
-
- Sep 07, 2020
-
-
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to have been added after kernel 5.4. Signed-off-by:Douglas Anderson <dianders@chromium.org> Acked-by:
Lars Povlsen <lars.povlsen@microchip.com> Acked-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Acked-by:
-
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v5.4 timeframe. Signed-off-by: -
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.19 timeframe. Signed-off-by: -
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.14 timeframe. Signed-off-by: -
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.9 timeframe. Signed-off-by: -
Douglas Anderson authored
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.4 timeframe. Signed-off-by:Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid Signed-off-by:
-
Krzysztof Kozlowski authored
Multiple MMC host controller driver can be compile tested as they do not depend on architecture specific headers. Signed-off-by:
-
Krzysztof Kozlowski authored
All entries in Kconfig are already part of "if MMC", so there is no need for additional dependency on MMC. Suggested-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Robin Murphy authored
Since commit 9495b7e9 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Xu Wang authored
Because clk_disable_unprepare already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200903084825.85616-1-vulab@iscas.ac.cn Signed-off-by:
-
Ulf Hansson authored
-
