- Jul 19, 2023
-
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Zhang Shurong authored
In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by:
-
Minjie Du authored
make second_timeout avoid double assignment. Signed-off-by:
Minjie Du <duminjie@vivo.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a fmdbg message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Jeffrey Hugo authored
source.codeaurora.org is no longer accessible and so the reference links in the documentation are not useful. The content was mirrored over to Code Linaro so lets update the references to point there instead. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Daniil Dulov authored
If cx24120_message_send() returns error, we should keep local struct unchanged. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 5afc9a25 ("[media] Add support for TechniSat Skystar S2") Signed-off-by:
Daniil Dulov <d.dulov@aladdin.ru> Signed-off-by:
-
Lu Hongfei authored
Use put_device to release the object get through of_find_device_by_node, avoiding resource leaks. Signed-off-by:
Lu Hongfei <luhongfei@vivo.com> Signed-off-by:
-
Christophe JAILLET authored
'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. Fixes: a2ab06d7 ("media: m920x: don't use stack on USB reads") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Alexander Stein authored
Add the error code of a failed i2c transfer to the error message. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Daniil Dulov authored
Variable loopdiv can be assigned 0, then it is used as a denominator, without checking it for 0. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 713d54a8 ("[media] DiB7090: add support for the dib7090 based") Signed-off-by:
-
Yu Zhe authored
Pointer variables of void * type do not require type cast. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
Yu Zhe authored
Pointer variables of void * type do not require type cast. Signed-off-by:
-
Yu Zhe authored
Pointer variables of void * type do not require type cast. Signed-off-by:
-
Dongliang Mu authored
The previous commit 4b208f8b ("[media] siano: register media controller earlier")moves siano_media_device_register before smscore_register_device, and adds corresponding error handling code if smscore_register_device fails. However, it misses the following error handling code of smsusb_init_device. Fix this by moving error handling code at the end of smsusb_init_device and adding a goto statement in the following error handling parts. Fixes: 4b208f8b ("[media] siano: register media controller earlier") Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by:
-
Dong Chuanjian authored
remove unnecessary void* type casting. Signed-off-by:
Dong Chuanjian <chuanjian@nfschina.com> Signed-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Signed-off-by:
-
- Jul 14, 2023
-
-
Christophe JAILLET authored
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos. Fixes: ca50c197 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Tomi Valkeinen authored
Add driver for TI DS90UB953 FPD-Link III Serializer. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Tomi Valkeinen authored
Add driver for TI DS90UB913 FPD-Link III Serializer. Signed-off-by:
-
Tomi Valkeinen authored
Add driver for TI DS90UB960 FPD-Link III Deserializer. Signed-off-by:
-
Tomi Valkeinen authored
Add DT bindings for TI DS90UB960 FPD-Link III Deserializer. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Tomi Valkeinen authored
Add DT bindings for TI DS90UB953 FPD-Link III Serializer. Signed-off-by:
-
Tomi Valkeinen authored
Add DT bindings for TI DS90UB913 FPD-Link III Serializer. Signed-off-by:
-
Luca Ceresoli authored
An ATR is a device that looks similar to an i2c-mux: it has an I2C slave "upstream" port and N master "downstream" ports, and forwards transactions from upstream to the appropriate downstream port. But it is different in that the forwarded transaction has a different slave address. The address used on the upstream bus is called the "alias" and is (potentially) different from the physical slave address of the downstream chip. Add a helper file (just like i2c-mux.c for a mux or switch) to allow implementing ATR features in a device driver. The helper takes care of adapter creation/destruction and translates addresses at each transaction. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Tomi Valkeinen authored
Add bindings for I2C Address Translator. Only one property is added, 'i2c-alias-pool', which can be used in the bindings for the device that supports ATR. Signed-off-by:
-
Claudiu Beznea authored
devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 0556f1d5 ("media: tvp5150: add input source selection of_graph support") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Bingbu Cao authored
On ACPI based platforms, the ov13b10 camera sensor need to be powered up by acquire the PM resource from INT3472. INT3472 will register one regulator 'avdd', one reset gpio and clock source for ov13b10. Add 2 power interfaces that are registered as runtime PM callbacks. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Hao Yao <hao.yao@intel.com> Suggested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
The supported ad5820 and ad5821 VCMs both use a single 16 bit register which is written by sending 2 bytes with the data directly after sending the i2c-client address. The ad5823 OTOH has a more typical i2c / smbus device setup with multiple 8 bit registers where the first byte send after the i2c-client address is the register address and the actual data only starts from the second byte after the i2c-client address. The ad5823 i2c_ and of_device_id-s was added at the same time as the ad5821 ids with as rationale: """ Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdf """ The AD5823 may be an electrical and functional replacement of the AD5820, but from a software pov it is not compatible at all and it is going to need its own driver, drop its id from the ad5820 driver. Fixes: b8bf7313 ("media: ad5820: Add support for ad5821 and ad5823") Cc: Pavel Machek <pavel@ucw.cz> Cc: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Tommaso Merciai authored
The format param actually is not used in imx290_ctrl_update function, let's drop this Fixes: bc35f9a2 ("media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s") Signed-off-by:
Tommaso Merciai <tomm.merciai@gmail.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Bingbu Cao authored
On ACPI systems, the HID of ov13b10 is 'OVTI13B1', add this new HID in acpi IDs table to make driver support it. Signed-off-by:
-
Nicolas Ferre authored
Wenyou's email is bouncing, remove him from this camera driver's entry and mark it as orphan. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Bingbu Cao authored
The ov13b10 need be connected to a CIO2 or IPU device by bridge, sometimes the bridge driver was not probed before ov13b10 driver, then the absence of the fwnode endpoint for this device is expected, so driver return -EPROBE_DEFER in this case to let the probe occur after bridge driver. Signed-off-by:
-
Guoniu.zhou authored
OV5640 will output abnormal image data when work at low resolution (320x240, 176x144 and 160x120) after switching from high resolution, such as 1080P, the time interval between high and low switching must be less than 1000ms in order to OV5640 don't enter suspend state during the time. The reason is by 0x3824 value don't restore to initialize value when do resolution switching. In high resolution setting array, 0x3824 is set to 0x04, but low resolution setting array remove 0x3824 in commit db15c195 ("media: ov5640: Remove duplicated mode settings"). So when do resolution switching from high to low, such as 1080P to 320x240, and the time interval is less than auto suspend delay time which means global initialize setting array will not be loaded, the output image data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c to avoid same issue. Fixes: db15c195 ("media: ov5640: Remove duplicated mode settings") Signed-off-by:
Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Jason Chen authored
The HTS value cannot be directly compared to the sensor's output size. It needs to be converted to an absolute time unit. Additionally, the hblank value need to be modified as it was previous invalid. Signed-off-by:
Jason Chen <jason.z.chen@intel.com> Signed-off-by:
-
Sakari Ailus authored
Remove Shawn Tu's and Chiranjeevi Rapolu's e-mail addresses as they are no longer function. Signed-off-by:
-
Sakari Ailus authored
Chiranjeevi's e-mail is bouncing: chiranjeevi.rapolu@intel.com DM3NAM02FT041.mail.protection.outlook.com Remote Server returned '550 5.4.1 Recipient address rejected: Access denied. AS(201806281)' Assign the driver to myself. Signed-off-by:
-
Sakari Ailus authored
Dongchun's e-mail is no longer active and he hasn't given a new one: The following message to <dongchun.zhu@mediatek.com> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to dongchun.zhu@mediatek.com is not allowed' Mark the drivers as orphaned. Signed-off-by:
-
