- Feb 11, 2015
-
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. This patch also increase number of bits availble for swap offset. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. This patch also increase number of bits availble for swap offset. Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. This patch also adjust __SWP_TYPE_SHIFT, effectively increase size of possible swap file to 128G. Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. This patch also adjust __SWP_TYPE_SHIFT and increase number of bits availble for swap offset. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Kirill A. Shutemov authored
We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by:
-
Kirill A. Shutemov authored
All users are gone. Signed-off-by:
-
Kirill A. Shutemov authored
One bit in ->vm_flags is unused now! Signed-off-by:
-
Kirill A. Shutemov authored
After removing vma->shared.nonlinear we have only one member of vma->shared union, which doesn't make much sense. This patch drops the union and move struct vma->shared.linear to vma->shared. Signed-off-by:
-
Kirill A. Shutemov authored
We don't create non-linear mappings anymore. Let's drop code which handles them in rmap. Signed-off-by:
-
Kirill A. Shutemov authored
We have to handle non-linear mappings for /proc/PID/{smaps,clear_refs} which is unused now. Let's drop it. Signed-off-by: -
Kirill A. Shutemov authored
Nobody uses it anymore. [akpm@linux-foundation.org: fix filemap_xip.c] Signed-off-by:
-
Kirill A. Shutemov authored
We don't create non-linear mappings anymore. Let's drop code which handles them on page fault. Signed-off-by:
-
Kirill A. Shutemov authored
We have remap_file_pages(2) emulation in -mm tree for few release cycles and we plan to have it mainline in v3.20. This patchset removes rest of VM_NONLINEAR infrastructure. Patches 1-8 take care about generic code. They are pretty straight-forward and can be applied without other of patches. Rest patches removes pte_file()-related stuff from architecture-specific code. It usually frees up one bit in non-present pte. I've tried to reuse that bit for swap offset, where I was able to figure out how to do that. For obvious reason I cannot test all that arch-specific code and would like to see acks from maintainers. In total, remap_file_pages(2) required about 1.4K lines of not-so-trivial kernel code. That's too much for functionality nobody uses. Tested-by:
Felipe Balbi <balbi@ti.com> This patch (of 38): We don't create non-linear mappings anymore. Let's drop code which handles them on unmap/zap. Signed-off-by:
-
Kirill A. Shutemov authored
remap_file_pages(2) was invented to be able efficiently map parts of huge file into limited 32-bit virtual address space such as in database workloads. Nonlinear mappings are pain to support and it seems there's no legitimate use-cases nowadays since 64-bit systems are widely available. Let's drop it and get rid of all these special-cased code. The patch replaces the syscall with emulation which creates new VMA on each remap_file_pages(), unless they it can be merged with an adjacent one. I didn't find *any* real code that uses remap_file_pages(2) to test emulation impact on. I've checked Debian code search and source of all packages in ALT Linux. No real users: libc wrappers, mentions in strace, gdb, valgrind and this kind of stuff. There are few basic tests in LTP for the syscall. They work just fine with emulation. To test performance impact, I've written small test case which demonstrate pretty much worst case scenario: map 4G shmfs file, write to begin of every page pgoff of the page, remap pages in reverse order, read every page. The test creates 1 million of VMAs if emulation is in use, so I had to set vm.max_map_count to 1100000 to avoid -ENOMEM. Before: 23.3 ( +- 4.31% ) seconds After: 43.9 ( +- 0.85% ) seconds Slowdown: 1.88x I believe we can live with that. Test case: #define _GNU_SOURCE #include <assert.h> #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #define MB (1024UL * 1024) #define SIZE (4096 * MB) int main(int argc, char **argv) { unsigned long *p; long i, pass; for (pass = 0; pass < 10; pass++) { p = mmap(NULL, SIZE, PROT_READ|PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); if (p == MAP_FAILED) { perror("mmap"); return -1; } for (i = 0; i < SIZE / 4096; i++) p[i * 4096 / sizeof(*p)] = i; for (i = 0; i < SIZE / 4096; i++) { if (remap_file_pages(p + i * 4096 / sizeof(*p), 4096, 0, (SIZE - 4096 * (i + 1)) >> 12, 0)) { perror("remap_file_pages"); return -1; } } for (i = SIZE / 4096 - 1; i >= 0; i--) assert(p[i * 4096 / sizeof(*p)] == SIZE / 4096 - i - 1); munmap(p, SIZE); } return 0; } [akpm@linux-foundation.org: fix spello] [sasha.levin@oracle.com: initialize populate before usage] [sasha.levin@oracle.com: grab file ref to prevent race while mmaping] Signed-off-by:"Kirill A. Shutemov" <kirill@shutemov.name> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dave Jones <davej@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Armin Rigo <arigo@tunes.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Andrew Morton authored
CONFIG_COMPACTION=y, CONFIG_DEBUG_FS=n: mm/vmstat.c:690: warning: 'frag_start' defined but not used mm/vmstat.c:702: warning: 'frag_next' defined but not used mm/vmstat.c:710: warning: 'frag_stop' defined but not used mm/vmstat.c:715: warning: 'walk_zones_in_node' defined but not used It's all a bit of a tangly mess and it's unclear why CONFIG_COMPACTION figures in there at all. Move frag_start/frag_next/frag_stop and migratetype_names[] into the existing CONFIG_PROC_FS block. walk_zones_in_node() gets a special ifdef. Also move the #include lines up to where #include lines live. [axel.lin@ingics.com: fix build error when !CONFIG_PROC_FS] Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Vaishali Thakkar authored
Here, free memory is allocated using kmem_cache_zalloc. So, use kmem_cache_free instead of kfree. This is done using Coccinelle and semantic patch used is as follows: @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) Signed-off-by:Vaishali Thakkar <vthakkar1994@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
-
Kim Phillips authored
Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Acked-by:
-
Joonsoo Kim authored
compound_head() is implemented with assumption that there would be race condition when checking tail flag. This assumption is only true when we try to access arbitrary positioned struct page. The situation that virt_to_head_page() is called is different case. We call virt_to_head_page() only in the range of allocated pages, so there is no race condition on tail flag. In this case, we don't need to handle race condition and we can reduce overhead slightly. This patch implements compound_head_fast() which is similar with compound_head() except tail flag race handling. And then, virt_to_head_page() uses this optimized function to improve performance. I saw 1.8% win in a fast-path loop over kmem_cache_alloc/free, (14.063 ns -> 13.810 ns) if target object is on tail page. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
-
Joonsoo Kim authored
We had to insert a preempt enable/disable in the fastpath a while ago in order to guarantee that tid and kmem_cache_cpu are retrieved on the same cpu. It is the problem only for CONFIG_PREEMPT in which scheduler can move the process to other cpu during retrieving data. Now, I reach the solution to remove preempt enable/disable in the fastpath. If tid is matched with kmem_cache_cpu's tid after tid and kmem_cache_cpu are retrieved by separate this_cpu operation, it means that they are retrieved on the same cpu. If not matched, we just have to retry it. With this guarantee, preemption enable/disable isn't need at all even if CONFIG_PREEMPT, so this patch removes it. I saw roughly 5% win in a fast-path loop over kmem_cache_alloc/free in CONFIG_PREEMPT. (14.821 ns -> 14.049 ns) Below is the result of Christoph's slab_test reported by Jesper Dangaard Brouer. * Before Single thread testing ===================== 1. Kmalloc: Repeatedly allocate then free test 10000 times kmalloc(8) -> 49 cycles kfree -> 62 cycles 10000 times kmalloc(16) -> 48 cycles kfree -> 64 cycles 10000 times kmalloc(32) -> 53 cycles kfree -> 70 cycles 10000 times kmalloc(64) -> 64 cycles kfree -> 77 cycles 10000 times kmalloc(128) -> 74 cycles kfree -> 84 cycles 10000 times kmalloc(256) -> 84 cycles kfree -> 114 cycles 10000 times kmalloc(512) -> 83 cycles kfree -> 116 cycles 10000 times kmalloc(1024) -> 81 cycles kfree -> 120 cycles 10000 times kmalloc(2048) -> 104 cycles kfree -> 136 cycles 10000 times kmalloc(4096) -> 142 cycles kfree -> 165 cycles 10000 times kmalloc(8192) -> 238 cycles kfree -> 226 cycles 10000 times kmalloc(16384) -> 403 cycles kfree -> 264 cycles 2. Kmalloc: alloc/free test 10000 times kmalloc(8)/kfree -> 68 cycles 10000 times kmalloc(16)/kfree -> 68 cycles 10000 times kmalloc(32)/kfree -> 69 cycles 10000 times kmalloc(64)/kfree -> 68 cycles 10000 times kmalloc(128)/kfree -> 68 cycles 10000 times kmalloc(256)/kfree -> 68 cycles 10000 times kmalloc(512)/kfree -> 74 cycles 10000 times kmalloc(1024)/kfree -> 75 cycles 10000 times kmalloc(2048)/kfree -> 74 cycles 10000 times kmalloc(4096)/kfree -> 74 cycles 10000 times kmalloc(8192)/kfree -> 75 cycles 10000 times kmalloc(16384)/kfree -> 510 cycles * After Single thread testing ===================== 1. Kmalloc: Repeatedly allocate then free test 10000 times kmalloc(8) -> 46 cycles kfree -> 61 cycles 10000 times kmalloc(16) -> 46 cycles kfree -> 63 cycles 10000 times kmalloc(32) -> 49 cycles kfree -> 69 cycles 10000 times kmalloc(64) -> 57 cycles kfree -> 76 cycles 10000 times kmalloc(128) -> 66 cycles kfree -> 83 cycles 10000 times kmalloc(256) -> 84 cycles kfree -> 110 cycles 10000 times kmalloc(512) -> 77 cycles kfree -> 114 cycles 10000 times kmalloc(1024) -> 80 cycles kfree -> 116 cycles 10000 times kmalloc(2048) -> 102 cycles kfree -> 131 cycles 10000 times kmalloc(4096) -> 135 cycles kfree -> 163 cycles 10000 times kmalloc(8192) -> 238 cycles kfree -> 218 cycles 10000 times kmalloc(16384) -> 399 cycles kfree -> 262 cycles 2. Kmalloc: alloc/free test 10000 times kmalloc(8)/kfree -> 65 cycles 10000 times kmalloc(16)/kfree -> 66 cycles 10000 times kmalloc(32)/kfree -> 65 cycles 10000 times kmalloc(64)/kfree -> 66 cycles 10000 times kmalloc(128)/kfree -> 66 cycles 10000 times kmalloc(256)/kfree -> 71 cycles 10000 times kmalloc(512)/kfree -> 72 cycles 10000 times kmalloc(1024)/kfree -> 71 cycles 10000 times kmalloc(2048)/kfree -> 71 cycles 10000 times kmalloc(4096)/kfree -> 71 cycles 10000 times kmalloc(8192)/kfree -> 65 cycles 10000 times kmalloc(16384)/kfree -> 511 cycles Most of the results are better than before. Note that this change slightly worses performance in !CONFIG_PREEMPT, roughly 0.3%. Implementing each case separately would help performance, but, since it's so marginal, I didn't do that. This would help maintanance since we have same code for all cases. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
Dmitry Monakhov authored
__generic_block_fiemap may spin very long time for large sparse files. Without this patch an unprivileged user may abuse system resources simply by spawning a vast number of unkilable busyloops (works on ext2/ext3): truncate --size 1T test for ((i=0;i<1024;i++)) do filefrag test > /dev/null & done Signed-off-by:Dmitry Monakhov <dmonakhov@openvz.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
-
Srinivas Eeda authored
A tiny race between BAST and unlock message causes the NULL dereference. A node sends an unlock request to master and receives a response. Before processing the response it receives a BAST from the master. Since both requests are processed by different threads it creates a race. While the BAST is being processed, lock can get freed by unlock code. This patch makes bast to return immediately if lock is found but unlock is pending. The code should handle this race. We also have to fix master node to skip sending BAST after receiving unlock message. Below is the crash stack BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: o2dlm_blocking_ast_wrapper+0xd/0x16 dlm_do_local_bast+0x8e/0x97 [ocfs2_dlm] dlm_proxy_ast_handler+0x838/0x87e [ocfs2_dlm] o2net_process_message+0x395/0x5b8 [ocfs2_nodemanager] o2net_rx_until_empty+0x762/0x90d [ocfs2_nodemanager] worker_thread+0x14d/0x1ed [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
alex chen authored
In ocfs2_dentry_convert_worker, we should prune the dcache before deleting the dentry of directory, otherwise, in the following cases the inode of directory will still remain in orphan directory until the device being umounted. Mount point: /mnt/ocfs2 Node A Node B mkdir /mnt/ocfs2/testdir ocfs2_mkdir ->ocfs2_mknod ->ocfs2_dentry_attach_lock ->ocfs2_dentry_lock(dentry, 0) ... ... touch /mnt/ocfs2/testdir/testfile unlink /mnt/test/testdir/testfile rmdir /mnt/ocfs2/testdir ocfs2_unlink ->ocfs2_remote_dentry_delete ->ocfs2_dentry_lock(dentry, 1) ... ... ... ... ocfs2_downconvert_thread ->ocfs2_unblock_lock ->ocfs2_dentry_convert_worker ->ocfs2_find_local_alias ->dget_dlock ->d_delete Here the dentry can not be released because the children's dentry is negative but still exist. Finally, this inode will still remain in orphan directory until its children are destroyed. So before deleting dentry of directory, we should prune the dcache to remove unused children of the parent dentry by shrink_dcache_parent(). Signed-off-by:Alex Chen <alex.chen@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Fabian Frederick authored
resv_lock is only used in reservations.c Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Daeseok Youn authored
Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Daeseok Youn authored
mlog_errno() is called twice when some functions are failed. Signed-off-by:
-
Daeseok Youn authored
Signed-off-by:
-
Dan Carpenter authored
Smatch complains that, if o2net_tx_can_proceed() returns false, then "sc" and "ret" are uninialized or maybe we are re-using the data from previous iteration. I do not know if we can hit this bug in real life but checking the return value is harmless and we may as well silence the static checker warning. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Jan Kara authored
The assigned value is never used. Coverity-id 1226847. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
alex chen authored
Add a mount option to support JBD2 feature: JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT. When this feature is opened, journal commit block can be written to disk without waiting for descriptor blocks, which can improve journal commit performance. This option will enable 'journal_checksum' internally. Using the fs_mark benchmark, using journal_async_commit shows a 50% improvement, the files per second go up from 215.2 to 317.5. test script: fs_mark -d /mnt/ocfs2/ -s 10240 -n 1000 default: FSUse% Count Size Files/sec App Overhead 0 1000 10240 215.2 17878 with journal_async_commit option: FSUse% Count Size Files/sec App Overhead 0 1000 10240 317.5 17881 Signed-off-by:Weiwei Wang <wangww631@huawei.comm> Reviewed-by:
-
alex chen authored
Similar to ocfs2_write_end_nolock() which is metioned at commit 136f49b9 ("ocfs2: fix journal commit deadlock"), we should unlock pages before ocfs2_commit_trans() in ocfs2_convert_inline_data_to_extents. Otherwise, it will cause a deadlock with journal commit threads. Signed-off-by:
-
Rickard Strandqvist authored
Remove dlm_joined() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Rickard Strandqvist authored
Remove ol_dqblk_file_block() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Rickard Strandqvist authored
Remove ocfs2_xattr_bucket_get_val() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
alex chen authored
Use snprintf format specifier "%lu" instead of "%ld" for argument of type 'unsigned long'. Signed-off-by:
-
Junxiao Bi authored
O2NET_CONN_IDLE_DELAY is not defined, connection attempts will not be canceled due to timeout. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
