- May 19, 2010
-
-
Ben Hutchings authored
SIS 760 is listed in the device tables for both amd64-agp and sis-agp. amd64-agp is apparently preferable since it has workarounds for some BIOS misconfigurations that sis-agp doesn't handle. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
* anholt/drm-intel-next: (515 commits) drm/i915: Fix out of tree builds drm/i915: move fence lru to struct drm_i915_fence_reg drm/i915: don't allow tiling changes on pinned buffers v2 drm/i915: Be extra careful about A/D matching for multifunction SDVO drm/i915: Fix DDC bus selection for multifunction SDVO drm/i915: cleanup mode setting before unmapping registers drm/i915: Make fbc control wrapper functions drm/i915: Wait for the GPU whilst shrinking, if truly desperate. drm/i915: Use spatio-temporal dithering on PCH [MTD] Remove zero-length files mtdbdi.c and internal.ho pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs libata: Fix several inaccuracies in developer's guide slub: Fix bad boundary check in init_kmem_cache_nodes() raid6: fix recovery performance regression KEYS: call_sbin_request_key() must write lock keyrings before modifying them KEYS: Use RCU dereference wrappers in keyring key type code KEYS: find_keyring_by_name() can gain access to a freed keyring ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ...
-
- May 18, 2010
-
-
Dave Airlie authored
print an error if these fail. Signed-off-by: -
Alex Deucher authored
This patch is a combination of the previous two profile patches, but without the index bugs. It cleans up and fixes some issues with pm profile setup on r6xx chips. Some tables have different orderings for the power states, also, r600 only has 1 clock mode per power state. On desktop cards there are no battery modes, so the low and high power states are the same. For the low profile case, choose the lower clock mode. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
- Separate dynpm and profile based power management methods. You can select the pm method by echoing the selected method ("dynpm" or "profile") to power_method in sysfs. - Expose basic 4 profile in profile method "default" - default clocks "auto" - select between low and high based on ac/dc state "low" - DC, low power mode "high" - AC, performance mode The current base profile is "default", but it should switched to "auto" once we've tested on more systems. Switching the state is a matter of echoing the requested profile to power_profile in sysfs. The lowest power states are selected automatically when dpms turns the monitors off in all states but default. - Remove dynamic fence-based reclocking for the moment. We can revisit this later once we have basic pm in. - Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure display side is initialized before pm. - Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume. - Remove dynpm module option. It's now selectable via sysfs. Signed-off-by: -
Alex Deucher authored
The lowest power states often cause display problems, so only enable them when all displays are off. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Matthew Garrett authored
GUI idle interrupts don't seem to work terribly well on r500 and earlier, so let's use a fence instead. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Matthew Garrett authored
We need to handle the ring while we've already locked it, so split out the allocation and commit functions in order to allow them to be used. Signed-off-by:
-
Alex Deucher authored
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc, Signed-off-by:
-
Alex Deucher authored
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc, Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Dave Airlie authored
since derefing the object might free it. Signed-off-by: -
Alex Deucher authored
- disable gui idle interrupt use Seems to hang some r5xx chips - move vbl range check into existing vbl check function in radeon_pm.c - disable crtc mc acccess for the whole reclocking process Signed-off-by:
-
Ben Skeggs authored
Will be used by nouveau driver also in the near future. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Matthew Garrett authored
This seems to be relatively stable now, so enable it for these chipsets too. Signed-off-by:
-
Matthew Garrett authored
The vblank interrupt on r600 doesn't seem to be especially reliable, so perform some sanity checks before the actual reclock. Signed-off-by:
-
Matthew Garrett authored
The ttm code could take vram_mutex followed by cp_mutex, while the reclocking code would do the reverse. Hilarity could ensue. Signed-off-by:
-
Matthew Garrett authored
We need to choose the correct PM state to transition into before starting the actual change. Call radeon_get_power_state() at the top of the clock setting to do so. Signed-off-by:
-
Matthew Garrett authored
With luck, dynamic memory reclocking on r600 should be stable with the previous patches. Enable it. Signed-off-by:
-
Matthew Garrett authored
The ttm bo workqueue may touch objects while we're reclocking, so make sure it's blocked until we're done. Signed-off-by:
-
Matthew Garrett authored
We want to be able to prevent the delayed workqueue from changing state while we're reclocking, so add an API to block and unblock it. Signed-off-by:
-
Matthew Garrett authored
We need to block the drm core from doing anything that may touch our vram during reclock, so take the drm mutex for the duration. Signed-off-by:
-
Matthew Garrett authored
Touching vram while the card is reclocking can lead to lockups. Unmap any pages that could be touched by the CPU and block any accesses to vram until the reclocking is complete. Signed-off-by:
-
Matthew Garrett authored
There's a moderate amount of effort involved in setting the card up for clock transitions, so unify the codepaths to make it easier to implement. Signed-off-by:
-
Alex Deucher authored
Add two new sysfs attributes: - dynpm - power_state Echoing 0/1 to dynpm disables/enables dynamic power management. The driver scales the sclk dynamically based on the number of queued fences. dynpm only scales sclk dynamically in single head mode. Echoing x.y to power_state selects a static power state (x) and clock mode (y). This allows you to statically select a power state and clock mode. Selecting a static clock mode will disable dynpm. Signed-off-by:
-
Alex Deucher authored
- pm_misc() - handles voltage, pcie lanes, and other non clock related power mode settings. Currently disabled. Needs further debugging - pm_prepare() - disables crtc mem requests right now. All memory clients need to be disabled when changing memory clocks. This function can be expanded to include disabling fb access as well. - pm_finish() - enable active memory clients. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
- remove non_clock_info struct - track power state misc flags Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Just adds overhead when the power state will never change. Signed-off-by:
-
Alex Deucher authored
Hook the atom table parsing up to module loading, so we can automatically load the appropriate hwmon drivers. Based on initial patch for r6xx from Matthew Garrett Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
This also simplifies the code and enables reclocking with multiple heads active by tracking whether the power states are single or multi-head capable. Eventually, we will want to select a power state based on external factors (AC/DC state, user selection, etc.). (v2) Update for evergreen Signed-off-by:
-
Alex Deucher authored
(v2) Add evergreen vbl checks Signed-off-by:
-
Alex Deucher authored
crtcs are what we ultimately care about wrt to pm. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
On pre-r6xx, the power mode array is usually ordered: low ... high default On r6xx+: default low ... high Signed-off-by:
-
Alex Deucher authored
set proper wait condition as noted by Rafał Miłecki. Signed-off-by:
-
