- Jul 02, 2020
-
-
Mark Brown authored
Merge series "regulator/qcom: Constify static structs" from Rikard Falkeborn <rikard.falkeborn@gmail.com>: Constify some static structs to allow the compiler to put them in read-only memory. Rikard Falkeborn (2): regulator: qcom_rpm: Constify struct regulator_ops regulator: qcom_spmi: Constify struct regulator_ops drivers/regulator/qcom_rpm-regulator.c | 6 +++--- drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------ 2 files changed, 15 insertions(+), 15 deletions(-) -- 2.27.0
-
Mark Brown authored
Merge series "Add frequency / voltage scaling support for IPQ6018 SoC" from Kathiravan T <kathirav@codeaurora.org>: IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same. changes since V1: - Moved YAML conversion to the last as per Mark's comments Kathiravan T (6): dt-bindings: soc: qcom: Add IPQ6018 compatible soc: qcom: smd-rpm: Add IPQ6018 compatible dt-bindings: regulator: add MP5496 regulator compatible regulator: qcom_smd: Add MP5496 regulators dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema .../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ---- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++ drivers/regulator/qcom_smd-regulator.c | 34 +++ drivers/soc/qcom/smd-rpm.c | 1 + 6 files changed, 233 insertions(+), 382 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -
Luca Ceresoli authored
This driver enables outputs by setting bit EN_BUCKn in the BUCKn_CTRL1 register. However, if bit EN_PIN_CTRLn in the same register is set, the output is actually enabled only if EN_BUCKn is set AND an enable pin is active. Since the driver does not touch EN_PIN_CTRLn, the choice is left to the hardware, which in turn gets this bit from OTP memory, and in absence of OTP data it uses a default value that is documented in the datasheet for LP8752x, but not for LP8756x. Thus the driver doesn't really "know" whether it is actually enabling the output or not. In order to make sure activation is always driver-controlled, just clear the EN_PIN_CTRLn bit. Now all activation solely depend on the EN_BUCKn bit. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200622204329.11147-2-luca@lucaceresoli.net Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Kathiravan T authored
IPQ6018 uses the PMIC MP5496. Add the binding for the same. Signed-off-by:
Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-4-git-send-email-kathirav@codeaurora.org Signed-off-by:
-
Kathiravan T authored
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same. Signed-off-by:
-
Rikard Falkeborn authored
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 20362 2592 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o After: text data bss dec hex filename 21814 1140 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200629194632.8147-3-rikard.falkeborn@gmail.com Signed-off-by:
-
Rikard Falkeborn authored
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 17485 500 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o After: text data bss dec hex filename 17881 104 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o Signed-off-by:
-
- Jun 26, 2020
-
-
Lee Jones authored
This was an upstreaming error. Remove it as it's not to be used. Fixes the following W=1 kernel build warning: drivers/regulator/qcom_smd-regulator.c:477:36: warning: ‘pmi8994_boost’ defined but not used [-Wunused-const-variable=] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-10-lee.jones@linaro.org Signed-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used. This change fixes the following warnings: drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'dev' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'reg' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'initdata' not described in 'wm8400_register_regulator' Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Link: https://lore.kernel.org/r/20200626065738.93412-9-lee.jones@linaro.org Signed-off-by:
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_enable’: drivers/regulator/tps65218-regulator.c:131:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 131 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_disable’: drivers/regulator/tps65218-regulator.c:144:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 144 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ Signed-off-by:
-
Lee Jones authored
Until now the aforementioned return value has been ignored. Previous and current calls to tps65217_reg_read() return instantly when the value is not 0, so let's do that. Fixes the following W=1 warning: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_regulator_probe’: drivers/regulator/tps65217-regulator.c:227:9: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 227 | int i, ret; | ^~~ Signed-off-by:
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_enable’: drivers/regulator/tps65217-regulator.c:127:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 127 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_disable’: drivers/regulator/tps65217-regulator.c:140:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 140 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ Signed-off-by:
-
Lee Jones authored
In kerneldoc format, data structures have to start with 'struct' else the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 kernel build warning: drivers/regulator/stpmic1_regulator.c:25: warning: cannot understand function prototype: 'struct stpmic1_regulator_cfg ' Signed-off-by:
-
Lee Jones authored
This particular comment doesn't have anything to do with documenting functions or data structures. Instead it is used as a section header. Fixes W=1 warning: drivers/regulator/pwm-regulator.c:55: warning: Function parameter or member 'rdev' not described in 'pwm_regulator_init_state' Signed-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various enum properties and function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used or none at all. This change fixes the following warnings: drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'VRM' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'XOB' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'vreg' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'dev' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'node' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_id' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_rpmh_data' not described in 'rpmh_regulator_init_vreg' Signed-off-by:
-
Lee Jones authored
max8998_get_current_limit() is only used via the .get_current_limit, so it doesn't need to be publicly supported, or to have its own external prototype. Instead, we'll make it static. Fixes the following W=1 warning: drivers/regulator/max8998.c:418:5: warning: no previous prototype for ‘max8998_get_current_limit’ [-Wmissing-prototypes] 418 | int max8998_get_current_limit(struct regulator_dev *rdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. It's missing all of it's function argument descriptions and the correct function header. Fixes the following W=1 warning(s): drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'max14577' not described in 'max14577_get_regma drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'reg_id' not described in 'max14577_get_regmap' Signed-off-by:
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. They're missing all of their struct's property descriptions and the correct 'struct *' header. Fixes the following W=1 warning(s): drivers/regulator/cpcap-regulator.c:99: warning: cannot understand function prototype: 'struct cpcap_regulator ' drivers/regulator/cpcap-regulator.c:337: warning: cannot understand function prototype: 'const struct cpcap_regulator omap4_regulators[] = ' Signed-off-by:
-
Lee Jones authored
It's okay to not check the return value that you're not conserned about, however it is not okay to assign a variable and not check or use the result. Fixes W=1 warnings(s): drivers/regulator/cpcap-regulator.c:172:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 172 | int error, ignore; | ^~~~~~ drivers/regulator/cpcap-regulator.c: In function ‘cpcap_regulator_disable’: drivers/regulator/cpcap-regulator.c:196:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 196 | int error, ignore; | ^~~~~~ Signed-off-by:
-
Lee Jones authored
Kerneldoc expects function arguments to be in the format '@.*:'. If this format is not followed the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 warning(s): drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'wm8350' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'lednum' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'dcdc' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'isink' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'pdata' not described in 'wm8350_register_led' Signed-off-by:
-
Lee Jones authored
Used primarily for the AB8540 which lost support in early 2018. It is now deemed safe to remove this legacy data structure. Also fixes W=1 issue: drivers/regulator/ab8500.c:88: warning: Function parameter or member 'expand_register' not described in 'ab8500_regulator_info' Signed-off-by:
-
Lee Jones authored
There isn't any code present within the current kernel to override this 'weak' function. Besides returning '0', which is never checked anyway, the whole function appears to be superfluous. Consequently fixes W=1 warning: drivers/regulator/dbx500-prcmu.c:113:27: warning: no previous prototype for ‘dbx500_regulator_testcase’ [-Wmissing-prototypes] 113 | int __attribute__((weak)) dbx500_regulator_testcase( | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
Lee Jones authored
regulator_suspend_enable(), regulator_suspend_disable() and regulator_set_suspend_voltage() are all exported members of the API, but are all missing prototypes. Fixes the following W=1 warning(s): drivers/regulator/core.c:3805:5: warning: no previous prototype for ‘regulator_suspend_enable’ [-Wmissing-prototypes] 3805 | int regulator_suspend_enable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3812:5: warning: no previous prototype for ‘regulator_suspend_disable’ [-Wmissing-prototypes] 3812 | int regulator_suspend_disable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3851:5: warning: no previous prototype for ‘regulator_set_suspend_voltage’ [-Wmissing-prototypes] 3851 | int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
- Jun 23, 2020
-
-
Robin Gong authored
Checking for 'ramp_delay = 0' to avoid Coverity warning report. Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592920870-12693-1-git-send-email-yibin.gong@nxp.com Signed-off-by:
-
- Jun 18, 2020
-
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 13114 8596 0 21710 54ce drivers/regulator/max8997-regulator.o After: text data bss dec hex filename 14038 7672 0 21710 54ce drivers/regulator/max8997-regulator.o Signed-off-by:
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 2753 7328 0 10081 2761 drivers/regulator/max8907-regulator.o After: text data bss dec hex filename 9405 684 0 10089 2769 drivers/regulator/max8907-regulator.o Signed-off-by:
-
Rikard Falkeborn authored
ltc3676_regulators is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4361 2064 8 6433 1921 drivers/regulator/ltc3676.o After: text data bss dec hex filename 6121 304 8 6433 1921 drivers/regulator/ltc3676.o Signed-off-by:
-
Rikard Falkeborn authored
cpcap_regulator_ops is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 14472 236 0 14708 3974 drivers/regulator/cpcap-regulator.o After: text data bss dec hex filename 14604 104 0 14708 3974 drivers/regulator/cpcap-regulator.o Signed-off-by:
-
Rikard Falkeborn authored
anatop_core_rops is not modified and can therefore be made const which allows the compiler to put it in read-only memory. Before: text data bss dec hex filename 4502 412 0 4914 1332 drivers/regulator/anatop-regulator.o After: text data bss dec hex filename 4634 280 0 4914 1332 drivers/regulator/anatop-regulator.o Signed-off-by:
-
- Jun 16, 2020
-
-
Mark Brown authored
Merge series "Add support for voltage regulator on ChromeOS EC." from Pi-Hsun Shih <pihsun@chromium.org>: Add support for controlling voltage regulator that is connected and controlled by ChromeOS EC. Kernel controls these regulators through newly added EC host commands. Changes from v5: * Move new host command to a separate patch. * Use devm_regulator_register. * Address review comments. Changes from v4: * Change compatible name from regulator-cros-ec to cros-ec-regulator. Changes from v3: * Fix dt bindings file name. * Remove check around CONFIG_OF in driver. * Add new host commands to cros_ec_trace. * Address review comments. Changes from v2: * Add 'depends on OF' to Kconfig. * Add Kconfig description about compiling as module. Changes from v1: * Change compatible string to google,regulator-cros-ec. * Use reg property in device tree. * Change license for dt binding according to checkpatch.pl. * Address comments on code styles. Pi-Hsun Shih (3): dt-bindings: regulator: Add DT binding for cros-ec-regulator platform/chrome: cros_ec: Add command for regulator control. regulator: Add driver for cros-ec-regulator .../regulator/google,cros-ec-regulator.yaml | 51 ++++ drivers/platform/chrome/cros_ec_trace.c | 5 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/cros-ec-regulator.c | 257 ++++++++++++++++++ .../linux/platform_data/cros_ec_commands.h | 82 ++++++ 6 files changed, 406 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml create mode 100644 drivers/regulator/cros-ec-regulator.c base-commit: b791d1bd -- 2.27.0.290.gba653c62da-goog
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20200609124610.3445662-10-kieran.bingham+renesas@ideasonboard.com Signed-off-by:
-
Kieran Bingham authored
decriptor -> descriptor. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20200609124610.3445662-17-kieran.bingham+renesas@ideasonboard.com Signed-off-by:
-
Pi-Hsun Shih authored
Add driver for cros-ec-regulator, representing a voltage regulator that is connected and controlled by ChromeOS EC, and is controlled by kernel with EC host commands. Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by:
Prashant Malani <pmalani@chromium.org> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200612040526.192878-4-pihsun@chromium.org Signed-off-by:
-
Pi-Hsun Shih authored
Add host commands for voltage regulator control through ChromeOS EC. Signed-off-by:
-
Pi-Hsun Shih authored
Add DT binding documentation for cros-ec-regulator, a voltage regulator controlled by ChromeOS EC. Signed-off-by:
-
- Jun 15, 2020
-
-
Mark Brown authored
-
Robin Gong authored
PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by:
Christophe Meynard <Christophe.Meynard@ign.fr> Signed-off-by:
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
