- Mar 13, 2020
-
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters (other than adaptive rx, which will now be rejected by core). Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Joe Perches authored
Converting fallthrough comments to fallthrough; creates warnings in this code when compiled with gcc. This code is overly complicated and reads rather better with a little refactoring and no fallthrough uses at all. Remove the fallthrough comments and simplify the written source code while reducing the object code size. Consolidate duplicated switch/case blocks for IPV4 and IPV6. defconfig x86-64 with sfc: $ size drivers/net/ethernet/sfc/ethtool.o* text data bss dec hex filename 10055 12 0 10067 2753 drivers/net/ethernet/sfc/ethtool.o.new 10135 12 0 10147 27a3 drivers/net/ethernet/sfc/ethtool.o.old Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Julian Wiedmann authored
This reverts commit 4cda7527 from net-next. Brown bag time. Michal noticed that this change doesn't work at all when netif_set_real_num_tx_queues() gets called prior to an initial dev_activate(), as for instance igb does. Doing so dies with: [ 40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400 [ 40.586922] #PF: supervisor read access in kernel mode [ 40.592668] #PF: error_code(0x0000) - not-present page [ 40.598405] PGD 0 P4D 0 [ 40.601234] Oops: 0000 [#1] PREEMPT SMP PTI [ 40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G E 5.6.0-rc3-ethnl.50-default #1 [ 40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013 [ 40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90 [ 40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a [ 40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203 [ 40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000 [ 40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0 [ 40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208 [ 40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000 [ 40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000 [ 40.699750] FS: 00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000 [ 40.708782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0 [ 40.723156] Call Trace: [ 40.725888] dev_qdisc_set_real_num_tx_queues+0x61/0x90 [ 40.731725] netif_set_real_num_tx_queues+0x94/0x1d0 [ 40.737286] __igb_open+0x19a/0x5d0 [igb] [ 40.741767] __dev_open+0xbb/0x150 [ 40.745567] __dev_change_flags+0x157/0x1a0 [ 40.750240] dev_change_flags+0x23/0x60 [...] Fixes: 4cda7527 ("net: sched: make newly activated qdiscs visible") Reported-by:
Michal Kubecek <mkubecek@suse.cz> CC: Michal Kubecek <mkubecek@suse.cz> CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
- Mar 12, 2020
-
-
Alex Elder authored
The definitions for the "qcom,smem-states" and "qcom,smem-state-names" properties need to list their "$ref" under an "allOf" keyword. In addition, fix two problems in the example at the end: - Use #include for header files that define needed symbolic values - Terminate the line that includes the "ipa-shared" register space name with a comma rather than a semicolon Finally, update some white space in the example for better alignment. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
-
Davide Caratti authored
the following packetdrill script socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey> < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]> > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]> getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 fcntl(3, F_SETFL, O_RDWR) = 0 write(3, ..., 1000) = 1000 doesn't transmit 1KB data packet after a successful three-way-handshake, using mp_capable with data as required by protocol v1, and write() hangs forever: PID: 973 TASK: ffff97dd399cae80 CPU: 1 COMMAND: "packetdrill" #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000 #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0 #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184 #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064 #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324 #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7 #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976 #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c RIP: 00007f959407eaf7 RSP: 00007ffe9e95a910 RFLAGS: 00000293 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f959407eaf7 RDX: 00000000000003e8 RSI: 0000000001785fe0 RDI: 0000000000000008 RBP: 0000000001785fe0 R8: 0000000000000000 R9: 0000000000000003 R10: 0000000000000007 R11: 0000000000000293 R12: 00000000000003e8 R13: 00007ffe9e95ae30 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the third ack. Fixes: 1954b860 ("mptcp: Check connection state before attempting send") Suggested-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/emac/core.c: In function __emac_mdio_write: drivers/net/ethernet/ibm/emac/core.c:875:9: warning: variable err set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at netlink_seq_start() warning: context imbalance in netlink_seq_start() - wrong count at exit The root cause is the missing annotation at netlink_seq_start() Add the missing __acquires(RCU) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warning at tcp_child_process() warning: context imbalance in tcp_child_process() - unexpected unlock The root cause is the missing annotation at tcp_child_process() Add the missing __releases(&((child)->sk_lock.slock)) annotation Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warnings at raw_seq_start() and raw_seq_stop() warning: context imbalance in raw_seq_start() - wrong count at exit warning: context imbalance in raw_seq_stop() - unexpected unlock The root cause is the missing annotations at raw_seq_start() and raw_seq_stop() Add the missing __acquires(&h->lock) annotation Add the missing __releases(&h->lock) annotation Signed-off-by:
-
Julian Wiedmann authored
In their .attach callback, mq[prio] only add the qdiscs of the currently active TX queues to the device's qdisc hash list. If a user later increases the number of active TX queues, their qdiscs are not visible via eg. 'tc qdisc show'. Add a hook to netif_set_real_num_tx_queues() that walks all active TX queues and adds those which are missing to the hash list. CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Pavel Machek authored
No need to play with gotos to jump over single statement. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Jose Abreu authored
Since commit 319a1d19, stmmac only support basic HW stats type for action. Set this field in the L3/L4 Filtering test so that it correctly setups the filter instead of returning EOPNOTSUPP. Fixes: 319a1d19 ("flow_offload: check for basic action hw stats type") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Alexander Bersenev authored
The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
Martin Varghese authored
Reverted commit "2baecda3 bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()" An explicit call to udp_encap_enable is needed as the setup_udp_tunnel_sock does not call udp_encap_enable if the if the socket is of type v6. Bareudp device uses v6 socket to receive v4 & v6 traffic CC: Taehee Yoo <ap420073@gmail.com> Fixes: 2baecda3 ("bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
tangbin authored
In this function, ftgmac100_probe() can be triggered only if the platform_device and platform_driver matches, so the judgement at the beginning is redundant. Signed-off-by:
tangbin <tangbin@cmss.chinamobile.com> Signed-off-by:
-
- Mar 11, 2020
-
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 3 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts 15 drivers in drivers/net/ethernet. 3 more conversion sets to come. None of the drivers here checked all unsupported parameters. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject all unsupported parameters. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject most of unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver only rejected some of the unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Acked-by:
-
Heiner Kallweit authored
Let netdev_stats_to_stats64() do the copy work for us. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Clearing opts2 belongs to preparing the descriptor for DMA engine use. Therefore move it into rtl8169_mark_to_asic(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-03-10 This series contains updates to ice and iavf drivers. Cleaned up unnecessary parenthesis, which was pointed out by Sergei Shtylyov. Mitch updates the iavf and ice drivers to expand the limitation on the number of queues that the driver can support to account for the newer 800-series capabilities. Brett cleans up the error messages for both SR-IOV and non SR-IOV use cases. Fixed the logic when the ice driver is removed and a bare-metal VF is passing traffic, which was causing a transmit hang on the VF. Updated the ice driver to display "Link detected" field via ethtool, when the driver is in safe mode. Updated ice driver to properly set VLAN pruning when transmit anti-spoof is off. Avinash fixed a corner case in DCB, when switching from IEEE to CEE mode, the DCBX mode does not get properly updated. Dave updates the logic when switching from software DCB to firmware DCB to renegotiate DCBX to ensure the firmware agent has up to date information about the DCB settings of the link partner. Lukasz increases the PF's mailbox receive queue size to the maximum to prevent potential bottleneck or slow down occurring from the PF's mailbox receive queue being full. Bruce updates the ice driver to use strscpy() instead of strlcpy(). Cleaned up variable names that were not very descriptive with names that had more meaning. Anirudh replaces the use of ENOTSUPP with EOPNOTSUPP in the ice driver. Jake fixed up a function header comment to properly reflect the variable size and use. v2: Dropped patch 5 of the original series, where Tony added tunnel offload support. Based on community feedback, the patch needed changes, so giving Tony additional time to work on those changes and not hold up the remaining changes in the series. ==================== Acked-by: -
DENG Qingfang authored
The inner pair of parentheses should be around the variable x Fixes: 37feab60 ("net: dsa: mt7530: add support for port mirroring") Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Signed-off-by:
-
George McCollister authored
Simplify ksz_common.c by using delayed_work instead of a combination of timer and work. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== flow_offload: follow-ups to HW stats type patchset This patchset includes couple of patches in reaction to the discussions to the original HW stats patchset. The first patch is a fix, the other two patches are basically cosmetics. ==================== Acked-by:
Edward Cree <ecree@solarflare.com> Reviewed-by:
-
