- Jan 05, 2024
-
-
Elad Nachman authored
Add dt bindings for Marvell AC5/X/IM eMMC controller. This compatibility string covers the differences in the AC5/X version of the driver: 31-bit bus limitation and DDR memory starting at address 0x2_0000_0000, which are handled by usage of a bounce buffer plus a different DMA mask. Signed-off-by:
Elad Nachman <enachman@marvell.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240103172803.1826113-2-enachman@marvell.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Kamal Dasu authored
74165b0 shall use a new sdio controller core version which requires a different reset sequence. For core reset we use sdhci_reset. For CMD and/or DATA reset added a new function to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or SDHCI_RESET_DATA fields. Signed-off-by:
Kamal Dasu <kdasu@broadcom.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103222338.31447-3-kamal.dasu@broadcom.com Signed-off-by:
-
Kamal Dasu authored
With newer sdio controller core used for 74165b0 we need to update the compatibility with "brcm,bcm74165b0-sdhci". Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240103222338.31447-2-kamal.dasu@broadcom.com Signed-off-by:
-
- Jan 03, 2024
-
-
Ulf Hansson authored
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: -
Jorge Ramirez-Ortiz authored
Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by:
Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by:
Avri Altman <avri.altman@wdc.com> Acked-by:
-
Wenchao Chen authored
Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this. Signed-off-by:
Wenchao Chen <wenchao.chen@unisoc.com> Fixes: ff874dbc ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K") Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com Signed-off-by:
-
Mengqi Zhang authored
During the initialization to HS400es stage, add a HS400 tuning flow as an optional process. For Mediatek IP, the HS400es mode requires a specific tuning to ensure the correct HS400 timing setting. Signed-off-by:
Mengqi Zhang <mengqi.zhang@mediatek.com> Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com Signed-off-by:
-
Peter Robinson authored
The sdhci_omap is specific to older TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 7d326930 ("mmc: sdhci-omap: Add OMAP SDHCI driver") Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com Signed-off-by:
-
Peter Robinson authored
The sdhci_am654 is specific to recent TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 41fd4cae ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by:
-
Lin Gui authored
The eMMC card can be set into write-protected mode to prevent data from being accidentally modified or deleted. Wp_grp_size (Write Protect Group Size) refers to an attribute of the eMMC card, used to manage write protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size (Write Protect Group Size) indicates how many eMMC blocks are contained in each write protection group on the eMMC card. To allow userspace easy access of the CSD register bits, let's add sysfs node "wp_grp_size". Signed-off-by:
Lin Gui <lin.gui@mediatek.com> Signed-off-by:
Bo Ye <bo.ye@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com Signed-off-by:
-
Adrian Hunter authored
Add a test to repeatedly re-tune in between random reads. The test is non-destructive of data on the card and runs for 30 seconds. It can be repeated to test for longer durations. If re-tuning is not supported, the test is skipped. Example: # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmcblk/unbind # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmc_test/bind [ 36.642257] mmc_test mmc1:0001: Card claimed for testing. # cat /sys/kernel/debug/mmc1/mmc1\:0001/testlist | grep tuning 52: Re-tuning reliability # echo 52 > /sys/kernel/debug/mmc1/mmc1\:0001/test [ 91.522555] mmc1: Starting tests of card mmc1:0001... [ 91.528425] mmc1: Test case 52. Re-tuning reliability... [ 121.536682] mmc1: Result: OK [ 121.539572] mmc1: Tests completed. Signed-off-by:
-
Andy Shevchenko authored
There is no need to duplicate what SPI core or individual controller drivers already do, i.e. mapping the buffers for DMA capable transfers. Note, that the code, besides its redundancy, was buggy: strictly speaking there is no guarantee, while it's true for those which can use this code (see below), that the SPI host controller _is_ the device which does DMA. Also see the Link tags below. Additional notes. Currently only two SPI host controller drivers may use premapped (by the user) DMA buffers: - drivers/spi/spi-au1550.c - drivers/spi/spi-fsl-spi.c Both of them have DMA mapping support code. I don't expect that SPI host controller code is worse than what has been done in mmc_spi. Hence I do not expect any regressions here. Otherwise, I'm pretty much sure these regressions have to be fixed in the respective drivers, and not here. That said, remove all related pieces of DMA mapping code from mmc_spi. Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/ Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com Signed-off-by:
-
- Jan 02, 2024
-
-
Krzysztof Kozlowski authored
Add dedicated compatibles for the Qualcomm IPQ4019 and IPQ8074 SoCs, because usage of generic qcom,sdhci-msm-v4 compatible alone is deprecated. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231211085830.25380-1-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Krzysztof Kozlowski authored
The DW MSHC node in Intel SocFPGA ARM64 DTS has iommus property, so allow it to silence dtbs_check warnings: socfpga_n5x_socdk.dtb: mmc@ff808000: Unevaluated properties are not allowed ('iommus' was unexpected) Signed-off-by:
-
- Dec 07, 2023
-
-
Ulf Hansson authored
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: -
Geert Uytterhoeven authored
On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __run_timers.part.0+0x1d0/0x1e8 ra : __run_timers.part.0+0x134/0x1e8 epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60 gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000 t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20 s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000 a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60 a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68 s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000 s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0 s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000 s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52 t5 : ffffffd8024ae018 t6 : ffffffd8024ae038 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8 [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a [<ffffffff80809092>] __do_softirq+0xc6/0x1fa [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84 [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28 ---[ end trace 0000000000000000 ]--- What happens? renesas_sdhi_probe() { tmio_mmc_host_alloc() mmc_alloc_host() INIT_DELAYED_WORK(&host->detect, mmc_rescan); devm_request_irq(tmio_mmc_irq); /* * After this, the interrupt handler may be invoked at any time * * tmio_mmc_irq() * { * __tmio_mmc_card_detect_irq() * mmc_detect_change() * _mmc_detect_change() * mmc_schedule_delayed_work(&host->detect, delay); * } */ tmio_mmc_host_probe() tmio_mmc_init_ocr() -EPROBE_DEFER tmio_mmc_host_free() mmc_free_host() } When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer. Fix this by cancelling any pending delayed work before releasing the MMC host structure. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be Signed-off-by:
-
Axe Yang authored
Previously, during the MSDC calibration process, a full clock cycle actually not be covered, which in some cases didn't yield the best results and could cause CRC errors. This problem is particularly evident when MSDC is used as an SDIO host. In fact, MSDC support tuning up to a maximum of 64 steps, but by default, the step number is 32. By increase the tuning step, we are more likely to cover more parts of a clock cycle, and get better calibration result. To illustrate, when tuning 32 steps, if the obtained window has a hole near the middle, like this: 0xffc07ff (hex), then the selected delay will be the 6 (counting from right to left). (32 <- 1) 1111 1111 1100 0000 0000 0111 11(1)1 1111 However, if we tune 64 steps, the window obtained may look like this: 0xfffffffffffc07ff. The final selected delay will be 44, which is safer as it is further away from the hole: (64 <- 1) 1111 ... (1)111 1111 1111 1111 1111 1100 0000 0000 0111 1111 1111 In this case, delay 6 selected through 32 steps tuning is obviously not optimal, and this delay is closer to the hole, using it would easily cause CRC problems. As per mesaurements taken on mediatek SoC platform, the tuning phase will take: eMMC - 32 steps: ~3ms - 64 steps: ~6ms SDIO - 32 steps: ~4ms - 64 steos: ~7ms Tuning more steps won't prolong boot times by any meaningful amount of time, so for SD/SDIO the default tuning steps will be adjust to 64. But for eMMC, it is still preferred to use 32 steps tuning as otherwise there would be performance lose when accessing the RPMB partition(requiring retuning each time). You can configure property "mediatek,tuning-step" in MSDC dts node to adjust the step number. Signed-off-by:
Axe Yang <axe.yang@mediatek.com> Reviewed-by:
-
Axe Yang authored
Add 'mediatek,tuning-steps' setting. This property will give MSDC a chance to extend tuning steps up to 64. With more tuning steps, MSDC may achieve a more optimal calibration result, thus avoiding potential CRC issues. Reviewed-by:
-
Randy Dunlap authored
Use "/*" instead of "/**" for common C comments to prevent warnings from scripts/kernel-doc. sdhci-omap.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst sdhci-omap.c:3: warning: missing initial short description on line: * SDHCI Controller driver for TI's OMAP SoCs Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202311201117.lFxgJTK6-lkp@intel.com/ Link: https://lore.kernel.org/r/20231206055855.21092-1-rdunlap@infradead.org Signed-off-by:
-
Ulf Hansson authored
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: -
Jorge Ramirez-Ortiz authored
When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575 ("mmc: block: Convert RPMB to a character device"). One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it. Fixes: 97548575 ("mmc: block: Convert RPMB to a character device") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by:
-
Pin-yen Lin authored
This log message is necessary for debugging, so enable it by default to debug issues that are hard to reproduce locally. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Wenbin Mei <wenbin.mei@mediatek.com> Reviewed-by:
-
Avri Altman authored
Field Firmware Update (ffu) may use close-ended or open ended sequence. Each such sequence is comprised of a write commands enclosed between 2 switch commands - to and from ffu mode. So for the close-ended case, it will be: cmd6->cmd23-cmd25-cmd6. Some host controllers however, get confused when multi-block rw is sent without sbc, and may generate auto-cmd12 which breaks the ffu sequence. I encountered this issue while testing fwupd (github.com/fwupd/fwupd) on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad. Instead of a quirk, or hooking the request function of the msm ops, it would be better to fix the ioctl handling and make it use mrq.sbc instead of issuing SET_BLOCK_COUNT separately. Signed-off-by:
-
Vignesh Raghavendra authored
ti,otap-del-sel has been deprecated since v5.7 and there are no users of this property and no documentation in the DT bindings either. Drop the fallback code looking for this property, this makes sdhci_am654_get_otap_delay() much easier to read as all the TAP values can be handled via a single iterator loop. Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Acked-by:
-
Nathan Chancellor authored
Clang warns (or errors with CONFIG_WERROR=y): drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] 873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | || 875 | (device_property_read_bool(dev, "mmc-hs400-1_8v"))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] 873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | || 874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning 2 errors generated. There is little reason for this if statement to use bitwise ORs, as the short circuiting of logical OR does not need to be avoided in this context; it would be wasteful to call device_property_read_bool() three times if the first two calls returned true. Switch to logical OR to fix the warning. While in the area, the parentheses around the calls to device_property_read_bool() are not necessary and make the if statement harder to read, so remove them. Closes: https://github.com/ClangBuiltLinux/linux/issues/1960 Signed-off-by:Nathan Chancellor <nathan@kernel.org> Acked-by:
Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231116-sdhci-of-dwcmshc-fix-wbitwise-instead-of-logical-v1-1-7e1a7f4ccaab@kernel.org Signed-off-by:
-
Lad Prabhakar authored
The SDHI block on the RZ/Five SoC is identical to one found on the RZ/G2UL SoC. "renesas,sdhi-r9a07g043" compatible string will be used on the RZ/Five SoC so to make this clear and to keep this file consistent, update the comment to include RZ/Five SoC. No driver changes are required as generic compatible string "renesas,rcar-gen3-sdhi" will be used as a fallback on RZ/Five SoC. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20231115203254.30544-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by:
-
Swati Agarwal authored
Add gate property in example node for Xilinx platforms which will be used to ungate the DLL clock. DLL clock is required for higher frequencies like 50MHz, 100MHz and 200MHz. DLL clock is automatically selected by the SD controller when the SD output clock frequency is more than 25 MHz. Signed-off-by:
Swati Agarwal <swati.agarwal@amd.com> Co-developed-by:
Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Signed-off-by:
-
Drew Fustini authored
Add support for the mmc controller in the T-Head TH1520 with the new compatible "thead,th1520-dwcmshc". Implement custom sdhci_ops for set_uhs_signaling, reset, voltage_switch, and platform_execute_tuning. Acked-by:
-
Drew Fustini authored
Expose __sdhci_execute_tuning() so that it can be called from the mmc host controller drivers. In the sdhci-of-dwcmshc driver, sdhci_dwcmshc_th1520_ops sets platform_execute_tuning to th1520_execute_tuning(). That function has to manipulate phy registers before tuning can be performed. To avoid copying the code verbatim from __sdhci_execute_tuning() into th1520_execute_tuning(), make it possible for __sdhci_execute_tuning() to be called from sdhci-of-dwcmshc. Acked-by:
-
Drew Fustini authored
Add compatible value for the T-Head TH1520 dwcmshc controller. Acked-by:
Guo Ren <guoren@kernel.org> Acked-by:
-
Christophe Kerello authored
Add the support of SDIO in-band interrupt mode for STM32 and Ux500 variants. It allows the SD I/O card to interrupt the host on SDMMC_D1 data line. It is not enabled by default on Ux500 variant as this is unstable and Ux500 users should use out-of-band IRQs. Signed-off-by:
Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by:
Yann Gautier <yann.gautier@foss.st.com> Reviewed-by:
-
Avri Altman authored
Packed commands support was removed long time ago, but some bits got left behind. Remove them. Signed-off-by:
-
Ziyang Huang authored
Commit 4bc31ede ("mmc: core: Set HS clock speed before sending HS CMD13") set HS clock (52MHz) before switching to HS mode. For this freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9). Then we set rx_clk_phase to 11 or 15 which is out of range and make hardware frozen. After we send command request, no irq will be interrupted and the mmc driver will keep to wait for request finished, even durning rebooting. So let's set it to Phase 90 which should work in most cases. Then let meson_mx_sdhc_execute_tuning() to find the accurate value for data transfer. If this doesn't work, maybe need to define a factor in dts. Fixes: e4bf1b09 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by:
Ziyang Huang <hzyitc@outlook.com> Tested-by:
Anand Moon <linux.amoon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com Signed-off-by:
-
- Dec 03, 2023
-
-
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - Two fallocate fixes - Fix warnings from new gcc - Two symlink fixes * tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client, common: fix fortify warnings cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved smb: client: report correct st_size for SMB and NFS symlinks smb: client: fix missing mode bits for SMB symlinks
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to fix long-standing issue of memory leak at failure of device registration for fw_unit. We rarely encounter the issue, but it should be applied to stable releases, since it fixes inappropriate API usage" * tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: fix possible memory leak in create_units()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix corruption of f0/vs0 during FP/Vector save, seen as userspace crashes when using io-uring workers (in particular with MariaDB) - Fix KVM_RUN potentially clobbering all host userspace FP/Vector registers Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin. * tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers powerpc: Don't clobber f0/vs0 during fp|altivec register save
-
https://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull vfio fixes from Alex Williamson: - Fix the lifecycle of a mutex in the pds variant driver such that a reset prior to opening the device won't find it uninitialized. Implement the release path to symmetrically destroy the mutex. Also switch a different lock from spinlock to mutex as the code path has the potential to sleep and doesn't need the spinlock context otherwise (Brett Creeley) - Fix an issue detected via randconfig where KVM tries to symbol_get an undeclared function. The symbol is temporarily declared unconditionally here, which resolves the problem and avoids churn relative to a series pending for the next merge window which resolves some of this symbol ugliness, but also fixes Kconfig dependencies (Sean Christopherson) * tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio: vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart vfio/pds: Fix possible sleep while in atomic context vfio/pds: Fix mutex lock->magic != lock warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - A fix for the Xen event driver setting the correct return value when experiencing an allocation failure - A fix for allocating space for a struct in the percpu area to not cross page boundaries (this one is for x86, a similar one for Arm was already in the pull request for rc3) * tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: fix error code in xen_bind_pirq_msi_to_irq() x86/xen: fix percpu vcpu_info allocation
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - objpool: Fix objpool overrun case on memory/cache access delay especially on the big.LITTLE SoC. The objpool uses a copy of object slot index internal loop, but the slot index can be changed on another processor in parallel. In that case, the difference of 'head' local copy and the 'slot->last' index will be bigger than local slot size. In that case, we need to re-read the slot::head to update it. - kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer() and rcu_dereference_check() correctly. Also adding __rcu tag for finding wrong usage by sparse. - rethook: Fix to use appropriate rcu API for rethook::handler. The same as kretprobe, rethook::handler is RCU managed and it should use rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu tag for finding wrong usage by sparse. * tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rethook: Use __rcu pointer for rethook::handler kprobes: consistent rcu api usage for kretprobe holder lib: objpool: fix head overrun on RK3588 SBC
-
