gt58 and gt510 are Samsung Galaxy Tab A 8.0/9.7 (2015) tablets.
Document their compatibles.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-2-nikita@trvn.ru

Document the new samsung-j5x device tree bindings used in its device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106142956.547081-1-linmengbo0689@protonmail.com

Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used.  To date, this has been
indicated by the presence or absence of a "modem-init" property.

That mechanism has been deprecated.  Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.

Update all ARM platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.

Update the affected nodes so the status property is last.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-2-elder@linaro.org

Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-21-dmitry.baryshkov@linaro.org

Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-20-dmitry.baryshkov@linaro.org

Qualcomm ARM32 DTS fix for 6.2

This fixes a regression on Inforce 6540, as the sdhci nodes no longer
overrides the platform's mmc nodes.

Document the MSM8939 and supported boards in upstream Sony "Tulip" M4 Aqua
and Square APQ8039 T2.

MSM8939 is one of the older SoCs so we need to expand the list of
qcom,board-ids to allow for the bootloader DTS board-id matching
dependency.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117024846.1367794-2-bryan.odonoghue@linaro.org

Populate the rpm clock controller node with clocks and clock-names
properties.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221227001547.2830656-1-dmitry.baryshkov@linaro.org

Document the new gplus,fl8005a device tree bindings used in its
device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133158.139785-1-linmengbo0689@protonmail.com

Add vendor prefix for GPLUS.
https://www.gplus.com.tw



Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133145.139731-1-linmengbo0689@protonmail.com

Uses ti,lp8556 backlight with clk-pwm.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111183502.706151-1-matti.lehtimaki@gmail.com

Document SM6115P, an APQ version of SM6115.

Document Lenovo Tab P11 (J606F) as a SM6115P device.

Add SM6115 to the msm-id list of shame.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221208201401.530555-4-konrad.dybcio@linaro.org

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230140133.57885-1-krzysztof.kozlowski@linaro.org

Allow qcom,board-id and qcom,msm-id leagcy properties on these older
platforms: MSM8956, SDM636 and SM4250.  Also mention more OnePlus
devices using modified qcom,board-id field.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214150605.173346-1-krzysztof.kozlowski@linaro.org

Add entries in the device tree binding for sc7280-zombie with NVMe.

Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214114706.1.Ie4ca64ad56748de5aacd36237d42c80dd003c1a9@changeid

Add specific compatible to timer/watchdog device node.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-12-krzysztof.kozlowski@linaro.org

Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-11-krzysztof.kozlowski@linaro.org

Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-10-krzysztof.kozlowski@linaro.org

Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-9-krzysztof.kozlowski@linaro.org

Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-8-krzysztof.kozlowski@linaro.org

The most specific compatible should be upfront.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-7-krzysztof.kozlowski@linaro.org

Document the SM8550 SoC binding and the MTP board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-2-abel.vesa@linaro.org

Extend the secon DSI interface with the SoC-specific compat entry,
following the change for the first DSI interface.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110055433.734188-1-dmitry.baryshkov@linaro.org

Add silicon specific compatible qcom,msm8974-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for msm8974 against the yaml documentation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223021025.1646636-10-bryan.odonoghue@linaro.org

Append silicon specific compatible qcom,apq8064-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for apq8064 against the yaml documentation.

Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223021025.1646636-9-bryan.odonoghue@linaro.org

Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-3-krzysztof.kozlowski@linaro.org

Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-2-krzysztof.kozlowski@linaro.org

Configure the reserved memory for ADSP and enable it.
Delete nodes with reference to label.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221218211957.118473-1-matti.lehtimaki@gmail.com

Document the various phones added in upcoming patches. Also allow
qcom,msm-id and qcom,board-id for msm8953 and sdm450.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207-msm8953-6-1-next-dtbs-v3-v3-1-a64b3b0af0eb@z3ntu.xyz

Add a node for the current ADC (IADC) found in PM8226.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
[bjorn: Updated node name and added specific compatible, per request from Luca Weiss]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223193403.781355-4-rayyan@ansari.sh

The PON (Power On) device in PM8226 supports both the power key and
resin (reset input).
The reset input is usually connected to a physical volume up/down button.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223193403.781355-3-rayyan@ansari.sh

Sort the includes and nodes for consistency.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223193403.781355-2-rayyan@ansari.sh

Add clocks and clock-names nodes to the mmcc device to bind clocks using
the DT links.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-12-dmitry.baryshkov@linaro.org

Add clocks and clock-names nodes to the gcc device to bind clocks using
the DT links.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-11-dmitry.baryshkov@linaro.org

Add second DSI host and PHY available on the msm8974 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-10-dmitry.baryshkov@linaro.org

While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
were not updated leading to disabled and misconfigured SDHCI.

Cc: <stable@vger.kernel.org>
Fixes: 2477d819

 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org

A1-724 uses a Focaltech FT5446 touchscreen that is connected to blsp_i2c5.
Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033844.149115-1-linmengbo0689@protonmail.com

Iconia Talk S uses a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033830.149061-1-linmengbo0689@protonmail.com

Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
in 2014.

Note: The original firmware from Acer can only boot 32-bit kernels.
To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
didn't set up (firmware) secure boot.

Add a device tree for with initial support for:

- GPIO keys
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033817.149007-1-linmengbo0689@protonmail.com

Document the new acer,a1-724 device tree bindings used in its device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033804.148953-1-linmengbo0689@protonmail.com