- Nov 29, 2012
-
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Wow, this is a nice complicated mess of build-your-own-mc blocks... Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
There's more stuff that can be shared in the constructor, will be merged together again later. Signed-off-by: -
Ben Skeggs authored
This is in preparation for extending the support to the remaining chipsets, to allow for sharing more functions. Signed-off-by: -
Ben Skeggs authored
v2: fdo#55948 - the _ROM method silently truncates size to 4KiB, perform a checksum test and fall back to slow _ROM access on failure. Signed-off-by:
-
- Nov 28, 2012
-
-
Daniel Vetter authored
I didn't bother with documenting the really trivial new "extract something from dpcd" helpers, but the i2c over aux ch is now documented a bit. v2: Clarify the comment for i2c_dp_aux_add_bus a bit. v3: Fix more spelling fail spotted by Laurent Pinchart. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
Again only minimal changes to make kerneldoc no longer shout. Plus a little introduction in the form of a inline DOC: section to quickly explain what this is all about. v2: Fixup spelling fail. Acked-by:
-
Daniel Vetter authored
- Add the missing doc for drm_helper_move_panel_connectors_to_head. - Fixup any outdated stuff in existing sections. I've only looked at those kerneldoc headers that actually resulted in a complaint from the kerneldoc parser tool. v2: - Actually include the docbook snippet in the right patch. - Fix spelling fail. v3: It's now called drm_crtc_helper_set_mode, spotted by Laurent Pinchart. Acked-by:
-
Daniel Vetter authored
I'm devoting all my wrath to that fight, so don't misname it ;-) v2: Make it clear that this section talks about kms helpers. Acked-by:
-
Daniel Vetter authored
Those tend to be totally not interesting for end-users, and for debugging we tend to dump the entire noise anyway by enabling all debug messages. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57388 Signed-off-by:
-
James Hogan authored
Prevent ati_pcigart.c being built unless PCI is enabled. The exported functions in this file are only used by drivers which depend on PCI (namely r128 and radeon), and it tries to use PCI specific functions (pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause compiler errors when PCI is disabled. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Thomas Hellstrom authored
Make sure that other DRM clients can't map the contents of non-shareable buffer objects. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Thierry Reding authored
Add support for host1x, the display controllers and HDMI on the Tegra30 SoC. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Tested-by:
Stephen Warren <swarren@nvidia.com> Tested-by:
Mark Zhang <markz@nvidia.com> Signed-off-by:
-
Thierry Reding authored
Instead of using the stride derived from the display mode, use the pitch associated with the currently active framebuffer. This fixes a bug where the LCD display content would be skewed when enabling HDMI with a video mode different from that of the LCD. Signed-off-by:
Terje Bergstrom <tbergstrom@nvidia.com> Tested-by:
-
Thomas Hellstrom authored
Removes the need for a write lock each time we call ttm_bo_unref(). v2: Remove an unused variable. v3: Really remove the unused variable. Signed-off-by:
-
Thomas Hellstrom authored
Also move a kref_init() out of spinlocked region Signed-off-by:
-
Thomas Hellstrom authored
Signed-off-by:
-
Thomas Hellstrom authored
They need to be freed after an rcu grace period. Signed-off-by:
-
Thomas Hellstrom authored
Document how kref_get_unless_zero should be used and how it helps solve a typical kref / locking problem. Signed-off-by:
-
Thomas Hellstrom authored
While hashtab should now be RCU-safe, Add a drm_ht_xxx_api for consumers to use to make it obvious what locking mechanism is used. Document the way the rcu-safe interface should be used. Don't use rcu-safe list traversal in modify operations where we should use a spinlock / mutex anyway. Signed-off-by:
-
- Nov 21, 2012
-
-
Thomas Hellstrom authored
Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
Add a resource-private header for common resource definitions Signed-off-by:
-
Thomas Hellstrom authored
Refactor resource management to make it easy to hook up resources that are backed up by buffers. In particular, resources and their backing buffers can be evicted and rebound, if supported by the device. To avoid query deadlocks, the query code is also modified somewhat. Signed-off-by:
-
- Nov 20, 2012
-
-
Thomas Hellstrom authored
Signed-off-by:
-
Thomas Hellstrom authored
This also fixes a bug where the fence manager was left without irq enabled when waiting for fences, causing various errors at module load time Signed-off-by:
-
Thomas Hellstrom authored
Signed-off-by:
-
Thomas Hellstrom authored
Signed-off-by:
-
Thomas Hellstrom authored
Hiding SVGA seems to trigger a VGA screen clear, and with no traces dirty it doesn't seem to repaint Signed-off-by:
-
Maarten Lankhorst authored
This is similar to other platforms that don't allow command submission to buffers locked on the cpu. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by:
-
Thomas Hellstrom authored
Reservation locking currently always takes place under the LRU spinlock. Hence, strictly there is no need for an atomic_cmpxchg call; we can use atomic_read followed by atomic_write since nobody else will ever reserve without the lru spinlock held. At least on Intel this should remove a locked bus cycle on successful reserve. Note that thit commit may be obsoleted by the cross-device reservation work. Signed-off-by:
-
Thomas Hellstrom authored
The mostly used lookup+get put+potential_destroy path of TTM objects is converted to use RCU locks. This will substantially decrease the amount of locked bus cycles during normal operation. Since we use kfree_rcu to free the objects, no rcu synchronization is needed at module unload time. v2: Don't touch include/linux/kref.h v3: Adapt to kref_get_unless_zero return value change Signed-off-by:
-
Thomas Hellstrom authored
This function is intended to simplify locking around refcounting for objects that can be looked up from a lookup structure, and which are removed from that lookup structure in the object destructor. Operations on such objects require at least a read lock around lookup + kref_get, and a write lock around kref_put + remove from lookup structure. Furthermore, RCU implementations become extremely tricky. With a lookup followed by a kref_get_unless_zero *with return value check* locking in the kref_put path can be deferred to the actual removal from the lookup structure and RCU lookups become trivial. v2: Formatting fixes. v3: Invert the return value. Signed-off-by:
-
Thomas Hellstrom authored
TTM base objects will be the first consumer. Signed-off-by:
-
Maarten Lankhorst authored
Signed-off-by:
-
Maarten Lankhorst authored
Signed-off-by:
-
Maarten Lankhorst authored
vmwgfx was its only user and always sets it to the same.. Signed-off-by:
-
Maarten Lankhorst authored
It's always hardcoded to the same value. Signed-off-by:
-
Egbert Eich authored
When trying to obtain an accurate timestamp for the last vsync interrupt in vblank_disable_and_save() we loop until the vsync counter after reading the time stamp is identical to the one before. In the case where no hardware timestamp can be obtained there is probably no point in trying to make sure we remain within the same vsync during the time we obtain the counter. Furthermore we should make sure there's an 'emergency exit' so that we don't end up in an endless loop when the driver get_vblank_timestamp() function doesn't manage to return within the same vsync. This may happen when this function prints out debugging information over a slow (ie serial) line. Signed-off-by:
Egbert Eich <eich@suse.de> Signed-off-by:
-
Daniel Vetter authored
... by properly checking connector->polled. This doesn't matter too much because the polling work itself gets this slightly more right and doesn't set repoll if there's nothing to do. But we can do better. v2: Chris Wilson noticed that I broke polling, since repoll will never ever be set true. Fix this up, and simplify the logic a bit while at it. Signed-off-by:
-
