- Feb 08, 2020
-
-
Lorenzo Bianconi authored
Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in mt7615_eeprom_parse_hw_cap routine Fixes: acf5457f ("mt76: mt7615: read {tx,rx} mask from eeprom") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- Feb 04, 2020
-
-
Chin-Yen Lee authored
Clang warns that ret is used uninitialzed. And we found that actually the return type should be "int" instead of "bool". Fixes: 44bc17f7 ("rtw88: support wowlan feature for 8822c") Link: https://github.com/ClangBuiltLinux/linux/issues/850 Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by:
-
Mordechay Goodstein authored
Continue the wakeup flow only if no FW CPUs have an error If we don't check for error in all FW CPUs the driver can think based on one CPU that the FW is operational and try to access and send commands. Also, handle the error_id endianness correctly as le32 Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
I changed the API for asking for a session protection but I omitted the TDLS flows. Fix that now. Note that for the TDLS flow, we need to block until the session protection actually starts, so add this option to iwl_mvm_schedule_session_protection. This patch fixes a firmware assert in the TDLS flow since the old TIME_EVENT_CMD is not supported anymore by newer firwmare versions. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: fe959c7b ("iwlwifi: mvm: use the new session protection command") Signed-off-by:
-
Andrei Otcheretianski authored
Fix a kernel panic by checking that the sta is not NULL. This could happen during a reconfig flow, as mac80211 moves the sta between all the states without really checking if the previous state was successfully set. So, if for some reason we failed to add back the station, subsequent calls to sta_state() callback will be done when the station is NULL. This would result in a following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: iwl_mvm_cfg_he_sta+0xfc/0x690 [iwlmvm] [..] Call Trace: iwl_mvm_mac_sta_state+0x629/0x6f0 [iwlmvm] drv_sta_state+0xf4/0x950 [mac80211] ieee80211_reconfig+0xa12/0x2180 [mac80211] ieee80211_restart_work+0xbb/0xe0 [mac80211] process_one_work+0x1e2/0x610 worker_thread+0x4d/0x3e0 [..] Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Avraham Stern authored
When a FTM request is aborted, the driver sends the abort command to the fw and waits for a response. When the response arrives, the driver calls cfg80211_pmsr_complete() for that request. However, cfg80211 frees the requested data immediately after sending the abort command, so this may lead to use after free. Fix it by clearing the request data in the driver when the abort command arrives and ignoring the fw notification that will come afterwards. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Fixes: fc36ffda ("iwlwifi: mvm: support FTM initiator") Signed-off-by:
-
Golan Ben Ami authored
Till now, the driver asked the fw for a DTS measurement in automatic mode. This triggered a flow in which the fw actively measured the temperature. This is not needed anymore, as the fw performs measurements by itself, without the driver triggering them, and the current cadence in which the fw performs such measurements is sufficient. In addition, in some time-sensitive scenarios, in which the driver asks the fw for an active measurement twice in a short time (<100ms), the fw asserts with code 0x20100801. Change the DTS measurement to _WITHOUT_MEASURE instead, so the fw will respond with the last measurement it has performed. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
-
Luca Coelho authored
The IGTK keys are only removed by mac80211 after it has already removed the AP station. This causes the driver to throw an error because mac80211 is trying to remove the IGTK when the station doesn't exist anymore. The firmware is aware that the station has been removed and can deal with it the next time we try to add an IGTK for a station, so we shouldn't try to remove the key if the station ID is IWL_MVM_INVALID_STA. Do this by removing the check for mvm_sta before calling iwl_mvm_send_sta_igtk() and check return from that function gracefully if the station ID is invalid. Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
-
Andrei Otcheretianski authored
Use a unique name when registering a thermal zone. Otherwise, with multiple NICS, we hit the following warning during the unregistration. WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255 RIP: 0010:sysfs_remove_group+0x80/0x90 Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0x5a/0x350 ? sscanf+0x4e/0x70 device_unregister+0x1a/0x60 hwmon_device_unregister+0x4a/0xa0 thermal_remove_hwmon_sysfs+0x175/0x1d0 thermal_zone_device_unregister+0x188/0x1e0 iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm] iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm] _iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi] iwl_opmode_deregister+0x90/0xa0 [iwlwifi] __exit_compat+0x10/0x2c7 [iwlmvm] __x64_sys_delete_module+0x13f/0x270 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
- Jan 27, 2020
-
-
Nicolai Stange authored
Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing() and made it to return on overflow. However, the aforementioned commit doesn't set the return value accordingly and thus, lbs_ibss_join_existing() would return with zero even though it failed. Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the number of supplied rates fails. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
-
Nicolai Stange authored
Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing(). Unfortunately, it introduced a return path from within a RCU read side critical section without a corresponding rcu_read_unlock(). Fix this. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
-
Qing Xu authored
mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Qing Xu <m1s5p6688@gmail.com> Signed-off-by:
-
Qing Xu authored
mwifiex_ret_wmm_get_status() calls memcpy() without checking the destination size.Since the source is given from remote AP which contains illegal wmm elements , this may trigger a heap buffer overflow. Fix it by putting the length check before calling memcpy(). Signed-off-by:
-
Brian Norris authored
We called rcu_read_lock(), so we need to call rcu_read_unlock() before we return. Fixes: 3d94a4a8 ("mwifiex: fix possible heap overflow in mwifiex_process_country_ie()") Cc: stable@vger.kernel.org Cc: huangwen <huangwenabc@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
David S. Miller authored
This reverts commit 7786a1af . It causes build failures on 32-bit, for example: net/core/pktgen.o: In function `mod_cur_headers': >> pktgen.c:(.text.mod_cur_headers+0xba0): undefined reference to `__umoddi3' Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
In order to stop useless driver version bumps and unify output presented by ethtool -i, let's set default version string. As Linus said in [1]: "Things are supposed to be backwards and forwards compatible, because we don't accept breakage in user space anyway. So versioning is pointless, and only causes problems." They cause problems when users start to see version changes and expect specific set of features which will be different for stable@, vanilla and distribution kernels. Distribution kernels are based on some kernel version with extra patches on top, for example, in RedHat world this "extra" is a lot and for them your driver version say nothing. Users who run vanilla kernels won't use driver version information too, because running such kernels requires knowledge and understanding. Another set of problems are related to difference in versioning scheme and such doesn't allow to write meaningful automation which will work sanely on all ethtool capable devices. Before this change: [leonro@erver ~]$ ethtool -i eth0 driver: virtio_net version: 1.0.0 After this change and once ->version assignment will be deleted from virtio_net: [leonro@server ~]$ ethtool -i eth0 driver: virtio_net version: 5.5.0-rc6+ Link: https://lore.kernel.org/ksummit-discuss/CA+55aFx9A=5cc0QZ7CySC4F2K7eYaEfzkdYEc9JaNgCcV25=rg@mail.gmail.com/ Link: https://lore.kernel.org/linux-rdma/20200122152627.14903-1-michal.kalderon@marvell.com/T/#md460ff8f976c532a89d6860411c3c50bb811038b Link: https://lore.kernel.org/linux-rdma/20200127060835.GA570@unicorn.suse.cz Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
David S. Miller authored
Alex Maftei says: ==================== sfc: refactor mcdi filtering code Splitting final bits of the driver code into different files, which will later be used in another driver for a new product. This is a continuation to my previous patch series. (three of them) Refactoring will be concluded with this series, for now. As instructed, split the renaming and moving into different patches. Removed stray spaces before tabs... twice. Minor refactoring was done with the renaming, as explained in the first patch. ==================== Signed-off-by: -
Alex Maftei (amaftei) authored
Signed-off-by:
Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by:
-
Alex Maftei (amaftei) authored
Moved structs, enums, and added function prototypes. The affected functions are no longer static. Signed-off-by:
-
Alex Maftei (amaftei) authored
Minor style fixes included due to name lengths changing. Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. This patch-set includes link up and link initialization improvements, RSS and aRFS improvements, devlink refactoring and registration improvements, devlink info support including documentation. v2: Removed the TC ingress rate limiting patch. The developer Harsha needs to rework some code. Use fw.psid suggested by Jakub Kicinski. ==================== Signed-off-by: -
Vasundhara Volam authored
Add the set of info versions reported by bnxt_en driver, including a description of what the version represents, and what modes (fixed, running, stored) it reports. v2: Use fw.psid. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
Display the following information via devlink info command: - Driver name - Board id - Broad revision - Board Serial number - Board FW version - FW parameter set version - FW App version - FW management version - FW RoCE version Standard output example: $ devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver bnxt_en serial_number 00-10-18-FF-FE-AD-05-00 versions: fixed: asic.id D802 asic.rev 1 running: fw 216.1.124.0 fw.psid 0.0.0 fw.app 216.1.122.0 fw.mgmt 864.0.32.0 fw.roce 216.1.15.0 [ This version has incorporated changes suggested by Jakub Kicinski to use generic devlink version tags. ] v2: Use fw.psid Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: -
Vasundhara Volam authored
Add definition and documentation for the new generic info "fw.roce". v2: Remove board.nvm_cfg since fw.psid is similar. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vasundhara Volam authored
Instead of switch_id, renaming it to dsn will be more meaningful so that it can be used to display device serial number in follow up patch via devlink_info command. Signed-off-by:
-
Vasundhara Volam authored
This patch adds status notification to devlink flash update while flashing is in progress. $ devlink dev flash pci/0000:05:00.0 file 103.pkg Preparing to flash Flashing done Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
Latest kernels get the phys_port_name via devlink, if ndo_get_phys_port_name is not defined. To provide the phys_port_name correctly, register devlink before registering netdev. Also call devlink_port_type_eth_set() after registering netdev as devlink port updates the netdev structure and notifies user. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
This will allow to register for devlink port and use port features. Also register params only if firmware spec version is at least 0x10600 which will support reading/setting numbered variables in NVRAM. Signed-off-by:
-
Vasundhara Volam authored
Define bnxt_dl_params_register() and bnxt_dl_params_unregister() functions and move params register/unregister code to these newly defined functions. This patch is in preparation to register devlink irrespective of firmware spec. version in the next patch. Signed-off-by:
-
Michael Chan authored
The hardware bug has been fixed on B0 and newer chips, so disable the workaround on these chips. Signed-off-by:
-
Pavan Chebbi authored
Currently the only time we check and remove expired filters is when we are inserting new filters. Improving the aRFS expiry handling by adding code to do the above work periodically. Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Michael Chan authored
In bnxt_rx_flow_steer(), if the dissected packet is a fragment, do not proceed to create the ntuple filter and return error instead. Otherwise we would create a filter with 0 source and destination ports because the dissected ports would not be available for fragments. Signed-off-by:
-
Michael Chan authored
575XX (P5) chips have the same UDP RSS hashing capability as P4 chips, so we can enable it on P5 chips. Signed-off-by:
-
Michael Chan authored
The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by:
-
Michael Chan authored
If the 2nd parameter fw_dflt is not set, we are calling bnxt_probe_phy() after the firmware has reset. There is no need to query the current PHY settings from firmware as these settings may be different from the ethtool settings that the driver will re-establish later. So return earlier in bnxt_probe_phy() to save one firmware call. Signed-off-by:
-
Michael Chan authored
In bnxt_update_phy_setting(), ethtool_get_link_ksettings() and bnxt_disable_an_for_lpbk(), we inconsistently use netif_carrier_ok() to determine link. Instead, we should use bp->link_info.link_up which has the true link state. The netif_carrier state may be off during self-test and while the device is being reset and may not always reflect the true link state. By always using bp->link_info.link_up, the code is now more consistent and more correct. Some unnecessary link toggles are now prevented with this patch. Signed-off-by:
-
David S. Miller authored
Michal Kubecek says: ==================== ethtool netlink interface, part 2 This shorter series adds support for getting and setting of wake-on-lan settings and message mask (originally message level). Together with the code already in net-next, this will allow full implementation of "ethtool <dev>" and "ethtool -s <dev> ...". Older versions of the ethtool netlink series allowed getting WoL settings by unprivileged users and only filtered out the password but this was a source of controversy so for now, ETHTOOL_MSG_WOL_GET request always requires CAP_NET_ADMIN as ETHTOOL_GWOL ioctl request does. ==================== Signed-off-by: -
Michal Kubecek authored
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of a device are modified using ETHTOOL_MSG_WOL_SET netlink message or ETHTOOL_SWOL ioctl request. As notifications can be received by anyone, do not include SecureOn(tm) password in notification messages. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Michal Kubecek authored
Implement WOL_SET netlink request to set wake-on-lan settings. This is equivalent to ETHTOOL_SWOL ioctl request. Signed-off-by:
-
Michal Kubecek authored
Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
