- Feb 21, 2014
-
-
Emmanuel Grumbach authored
In case the firmware didn't assert but we want to restart it, e.g. we didn't get the reply for a host command, or the Tx queues are stuck, we should stop the firmware by provoking an interrupt. This allows to better debug the firmware in these bad scenarios. Signed-off-by:Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Eytan Lifshitz authored
iwl_parse_nvm_data() doesn't free allocated memory if it is fed with invalid parameter. Fix this. Signed-off-by:
Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by:
-
- Feb 13, 2014
-
-
Emmanuel Grumbach authored
The new API for ALIVE notification was misunderstood. Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
These inlines are pretty pointless now as they just return a fixed struct value, remove them - the code even gets shorter. Signed-off-by:
Eran Harary <eran.harary@intel.com> Signed-off-by:
-
Eran Harary authored
Support the changes below: - Fields and sections structure were changed. - the NVM file built from DWord instead of Words. - sections header format was changed. Signed-off-by:
-
Alexander Bondar authored
New FW enables support for power save on BSS and P2P client MACs simultaneously when they function on different channels (DCM). Enable this case in the driver after examining new TLV flag - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM. Still power management is not allowed on both MACs if they function on a same channel. Remove another redundant TLV flag - IWL_UCODE_TLV_FLAGS_P2P_PS that is not in use anymore. Remove bound_vif_cnt as redundant. Signed-off-by:
Alexander Bondar <alexander.bondar@intel.com> Signed-off-by:
-
Eliad Peller authored
Allow reading/writing prph registers. The address is set in the first argument of the write operation. second argument is optional and can be used for writing. e.g. echo '0xA01234 0x99' > /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg will write 0x99 into reg 0xA01234 cat /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg will show its current value (probably 0x99) Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Reviewed-by:
-
Johannes Berg authored
Instead of checking the SKB protocol against EAP, check the IEEE80211_TX_CTRL_PORT_CTRL_PROTO flag that more generally indicates whether or not the frame is a port control frame. Signed-off-by:
-
Emmanuel Grumbach authored
This will allow to get sniffer captures with correct settings for these HT / VHT capabilities. Also set the corresponding HAVE_MCS / VHT_KNOWN bits in the registration to mac80211. Reviewed-by:
-
Johannes Berg authored
There are a number of things in the .data section that should really be in .rodata, for example all ops structs and strings. Mark everything const that can be, leaving the .data section pretty much empty. Signed-off-by:
-
Eliad Peller authored
The various code blocks in iwl_pcie_[rt]xq_inc_wr_ptr finally do the same things, so just merge them all and make the functions cleaner. Signed-off-by:
-
Avinash Patil authored
This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch adds support to parse FW API version TLVs. Currently only API version for key_material is supported. Signed-off-by:
-
Avinash Patil authored
During deauthenticate/link lost event, disable all TDLS links as TDLS would not work when infra connection is not active. Also this will avoid an issue where ping to peer station doesn't work after reassociation to AP where we had created TDLS link in earlier association. Signed-off-by:
-
Avinash Patil authored
If TDLS link is 11ac enabled i.e. we as well as peer station supports VHT, configure seprate TX & RX window sizes during BA setup. So even if BSS does not support 11ac, we can use VHT capabilities and higher window sizes on direct link. Signed-off-by:
-
Avinash Patil authored
During TDLS setup request/response, if HW is 11ac capable, we add VHT Capability IEs in outgoing data frame. Also while processing received setup request/response, we preserve peer's 11ac capability retrieved from IEs. Patch also gets VHT parameters from config_station handlers and sets it to FW using TDLS config command. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch changes mwifiex_fill_vht_cap_tlv function to pass struct ieee80211_vht_cap instead of mwifiex_ie_types_vhtcap so that it can be used generically. Signed-off-by:
-
Avinash Patil authored
This patch adds AMPDU support for TDLS link. We have set 11n capabilities including AMPDU parameters during ENABLE_LINK. We set a variable in RA list to indicate this as TDLS link. This patch uses these capabilities to know if AMPDU is allowed on TDLS link and enables AMPDU aggregation for TX and RX reording support for RA list for this peer. Signed-off-by:
-
Avinash Patil authored
1. If data packet is addressed to TDLS peer for which link is established, mark these packets with TDLS flag so that FW can send them on direct link instead of sending via AP. 2. If data packet is addressed to TDLS peer and TDLS setup is underway, move these packets to TDLS queue. 3. If this packet is TDLS setup packet, do not block it. Signed-off-by:
-
Avinash Patil authored
While TDLS link is being setup, few packets from this station to peer station may be buffered at AP. It may happen that once TDLS link is setup, packets sent from station to peer on direct link get delivered before traffic from AP arrives at peer station. This results into packet reordering issue at peer station. To avoid this, we hold data packets destined to TDLS peer during TDLS setup. These packets are moved to temperory TDLS TX queue. Upon successful TDLS setup, they are moved to RA list created for this peer. Upon failure, packets are moved back to AP's RA list for that particular TID. Signed-off-by:
-
Avinash Patil authored
This patch adds cfg80211 change_station handler support for mwifiex which is needed for TDLS link setup. Driver creates a command to modify peer link capabilities and issues command to FW. Signed-off-by:
-
Avinash Patil authored
This patch adds cfg80211 add_station handler support for mwifiex which is needed for TDLS setup. Driver issues create TDLS link command to FW upon receiving add_station from cfg80211. Signed-off-by:
-
Avinash Patil authored
This patch adds cfg80211 handler tdls_oper handler support to mwifiex. Upon enable link, driver sets status as TDLS status as setup complete and also sets AMSDU size, AMPDU params for direct link. Upon disable link, driver issues command to FW to delete this link in FW. Signed-off-by:
-
Avinash Patil authored
This patch adds support for parsing TDLS action frames during station receive handler. Peer station capabilities are stored into station node. Signed-off-by:
-
Avinash Patil authored
This patch adds support for TDLS management frames transmit handler. mwifiex driver supports TDLS with external support, i.e. expects user space application to form TDLS frames. Same is advertised to cfg80211 during registration. Signed-off-by:
-
Amitkumar Karwar authored
Pass 'struct ieee80211_ht_cap' pointer to mwifiex_fill_cap_info() instead of 'struct mwifiex_ie_types_htcap' pointer, because the routine internally uses the later one. This patch also adds WARN_ON_ONCE check for NULL band. Signed-off-by:
-
Avinash Patil authored
These functions are now needed by TDLS while managing station list. Move them from AP related file to utility file. Signed-off-by:
-
Avinash Patil authored
tos_to_tid_inv values are needed even during TDLS restore operations. Currently tos_to_tid_inv is part of wmm.c and is declared static. Make it part of private structure so that it can be used in other files as well. Signed-off-by:
-
Avinash Patil authored
This patch fixes a bug where we were checking for AP's AMPDU param setting even when transmitting traffic to associated station. Patch adds provision to pass additional parameter ra_list pointer to function which checks if AMPDU is allowed. If current BSS type is AP, we check station's AMPDU params else we check AP's AMPDU params. Signed-off-by:
-
Amitkumar Karwar authored
Currently MU/SU beamformer and MU beamformee features are not supported. Hence this patch modifies VHT capability information accordingly. Number of sounding dimensions should be zero in this case. Signed-off-by:
-
Amitkumar Karwar authored
This patch makes sure that beamforming capability field in ht capability info gets filled if hardware supports the feature. Signed-off-by:
-
Aaron Durbin authored
The current mwifiex pcie driver assumed that it would get its cmdrsp_complete() callback called before another command was sent to unmap the command's skbuff. However, that is not true. The mwifiex_check_ps_cond() will send a sleep command to the card without having adapter->curr_cmd set. Within the workqueue's state machine the adapter's state would be set to allow commands (curr_cmd = NULL && cmd_sent = false) after having receieved the response from the sleep command. The card->cmd_buf would then be overridden with the new command but the first command's skbuff was not unmapped. This leaks mapped skbuffs when a bounce buffer is employed. To rectify this unmap the card->cmd_buf when the response is received from the card instead of waiting for the cmdrsp_complete() callback. Signed-off-by:
Aaron Durbin <adurbin@chromium.org> Reviewed-by:
Paul Stewart <pstew@chromium.org> Reviewed-by:
-
Aaron Durbin authored
Depending on the underlying DMA implementation its not possible to partially unmap DMA buffers. Moreover its not possible to understand the intent of passing 0 as the size to dma unmap. The intent of this driver is unmap the entire skb buffer. The only way to ensure that the size matches on unmap is to store both the dma address and the size in the skb ca field. Introduce a mwifiex_dma_mapping structure which tracks the dma address and the size. Additionally, provide a mwifiex_unmap_pci_memory() that utilizes the new structure. This also provide symmetry within the internal API. Signed-off-by:
-
Amitkumar Karwar authored
In extended scan, host gets scan results through one or multiple events instead of scan command response. Host will send next scan command when all the events are received. Legacy scan sometimes truncates scan results in a noisy environment due to buffer length limitation. This issue is addressed in extended scan. Signed-off-by:
-
Amitkumar Karwar authored
This new function will be useful later for extended scan feature. Signed-off-by:
-
Amitkumar Karwar authored
This new function will be useful later for extended scan feature. Signed-off-by:
-
Amitkumar Karwar authored
'mwifiex_bcn_param' structure contains five parameters which are present in beacon buffer in case of legacy scan. 'rssi' field won't be there in this buffer for extended scan. Hence 'bssid' and 'rssi' are removed from the structure and it is renamed as 'mwifiex_fixed_bcn_param' so that we can have common parsing logic later for both. Signed-off-by:
-
Bing Zhao authored
bit12 in fw_cap_info is for testing only. Remove all related code. Signed-off-by:
-
Bing Zhao authored
1) rename max_mcs to mcs; 2) initialize 'i' and 'nss' as 1 instead of 0 in nss lookup; 3) use GET_VHTNSSMCS(mcs_map, nss) macro; 4) use IEEE80211_VHT_MCS_* definitions instead of hard coding Reported-by:
-
Bing Zhao authored
Remove these local array variables and define them as static const array in global space. The duplicated mcs_rate table is removed automatically with this change. Reported-by:
-
