- Feb 13, 2022
-
-
Raju Lakkaraju authored
Add support for 4 Tx queues Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
PCI11010/PCI11414 devices are enhancement of Ethernet LAN743x chip family. Signed-off-by:
-
M Chetan Kumar authored
This patch enables Intel M.2 7360 WWAN card support on IOSM Driver. Control path implementation is a reuse whereas data path implementation it uses a different protocol called as MUX Aggregation. The major portion of this patch covers the MUX Aggregation protocol implementation used for IP traffic communication. For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for control communication. The user space application or the modem manager to use wwan AT port for data path establishment. During probe, driver reads the mux protocol device capability register to know the mux protocol version supported by device. Base on which the right mux protocol is initialized for data path communication. An overview of an Aggregation Protocol 1> An IP packet is encapsulated with 16 octet padding header to form a Datagram & the start offset of the Datagram is indexed into Datagram Header (DH). 2> Multiple such Datagrams are composed & the start offset of each DH is indexed into Datagram Table Header (DTH). 3> The Datagram Table (DT) is IP session specific & table_length item in DTH holds the number of composed datagram pertaining to that particular IP session. 4> And finally the offset of first DTH is indexed into DBH (Datagram Block Header). So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is exchanged between driver & device. Signed-off-by:M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
- Feb 12, 2022
-
-
Jakub Kicinski authored
This reverts commit 038fcdaf . Christophe points out div64_u64() and do_div() have different calling conventions. One updates the param, the other returns the result. Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/all/056a7276-c6f0-cd7e-9e46-1d8507a0b6b1@wanadoo.fr/ Fixes: 038fcdaf ("net: ethernet: cavium: use div64_u64() instead of do_div()") Link: https://lore.kernel.org/r/20220211020544.3262694-1-kuba@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Platform_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. Problem found with Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220210204223.104181-1-Julia.Lawall@inria.fr Signed-off-by:
-
Hariprasad Kelam authored
This patch fixes below error by using proper data type. drivers/net/ethernet/marvell/octeontx2/af/rpm.c: In function 'rpm_cfg_pfc_quanta_thresh': include/linux/find.h:40:23: error: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u16[1]' {aka 'short unsigned int[1]'} [-Werror=array-bounds] 40 | val = *addr & GENMASK(size - 1, offset); Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20220211155539.13931-1-hkelam@marvell.com Signed-off-by:
-
- Feb 11, 2022
-
-
David S. Miller authored
Merge tag 'wireless-next-2022-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next wireless-next patches for v5.18 First set of patches for v5.18, with both wireless and stack patches. rtw89 now has AP mode support and wcn36xx has survey support. But otherwise pretty normal. Major changes: ath11k * add LDPC FEC type in 802.11 radiotap header * enable RX PPDU stats in monitor co-exist mode wcn36xx * implement survey reporting brcmfmac * add CYW43570 PCIE device rtw88 * rtw8821c: enable RFE 6 devices rtw89 * AP mode support mt76 * mt7916 support * background radar detection support
-
David S. Miller authored
Eric Dumazet says: ==================== ipv6: remove addrconf reliance on loopback Second patch in this series removes IPv6 requirement about the netns loopback device being the last device being dismantled. This was needed because rt6_uncached_list_flush_dev() and ip6_dst_ifdown() had to switch dst dev to a known device (loopback). Instead of loopback, we can use the (hidden) blackhole_netdev which is also always there. This will allow future simplfications of netdev_run_to() and other parts of the stack like default_device_exit_batch(). Last two patches are optimizations for both IP families. ==================== Signed-off-by: -
Eric Dumazet authored
This is an optimization to keep the per-cpu lists as short as possible: Whenever rt_flush_dev() changes one rtable dst.dev matching the disappearing device, it can can transfer the object to a quarantine list, waiting for a final rt_del_uncached_list(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
This is an optimization to keep the per-cpu lists as short as possible: Whenever rt6_uncached_list_flush_dev() changes one rt6_info matching the disappearing device, it can can transfer the object to a quarantine list, waiting for a final rt6_uncached_list_del(). Signed-off-by:
-
Eric Dumazet authored
IPv6 addrconf notifiers wants the loopback device to be the last device being dismantled at netns deletion. This caused many limitations and work arounds. Back in linux-5.3, Mahesh added a per host blackhole_netdev that can be used whenever we need to make sure objects no longer refer to a disappearing device. If we attach to blackhole_netdev an ip6_ptr (allocate an idev), then we can use this special device (which is never freed) in place of the loopback_dev (which can be freed). This will permit improvements in netdev_run_todo() and other parts of the stack where had steps to make sure loopback_dev was the last device to disappear. Signed-off-by:
-
Eric Dumazet authored
This counter has never been visible, there is little point trying to maintain it. Signed-off-by:
-
Holger Brunck authored
The mv88e6352, mv88e6240 and mv88e6176 have a serdes interface. This patch allows to configure the output swing to a desired value in the phy-handle of the port. The value which is peak to peak has to be specified in microvolts. As the chips only supports eight dedicated values we return EINVAL if the value in the DTS does not match one of these values. Signed-off-by:
Holger Brunck <holger.brunck@hitachienergy.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
Marek Behún authored
Common PHYs and network PCSes often have the possibility to specify peak-to-peak voltage on the differential pair - the default voltage sometimes needs to be changed for a particular board. Add properties `tx-p2p-microvolt` and `tx-p2p-microvolt-names` for this purpose. The second property is needed to specify the mode for the corresponding voltage in the `tx-p2p-microvolt` property, if the voltage is to be used only for speficic mode. More voltage-mode pairs can be specified. Example usage with only one voltage (it will be used for all supported PHY modes, the `tx-p2p-microvolt-names` property is not needed in this case): tx-p2p-microvolt = <915000>; Example usage with voltages for multiple modes: tx-p2p-microvolt = <915000>, <1100000>, <1200000>; tx-p2p-microvolt-names = "2500base-x", "usb", "pcie"; Add these properties into a separate file phy/transmit-amplitude.yaml, which should be referenced by any binding that uses it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Guillaume Nault authored
The ->rtm_tos option is normally used to route packets based on both the destination address and the DS field. However it's ignored for IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route is going to work only on the destination address anyway, so it won't behave as specified. Suggested-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== More aggressive DSA cleanup This series deletes some code which is apparently not needed. I've had these patches in my tree for a while, and testing on my boards didn't reveal any issues. Compared to the RFC v1 series, the only change is the addition of patch 3. https://patchwork.kernel.org/project/netdevbpf/cover/20220107184842.550334-1-vladimir.oltean@nxp.com/ ==================== Signed-off-by:
-
Vladimir Oltean authored
Since commit 2f1e8ea7 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), suggested by Cong Wang, the DSA interfaces and their master have different dev->nested_level, which makes netif_addr_lock() stop complaining about potentially recursive locking on the same lock class. So we no longer need DSA slave interfaces to have their own lockdep class. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Since commit 2f1e8ea7 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), suggested by Cong Wang, the DSA interfaces and their master have different dev->nested_level, which makes netif_addr_lock() stop complaining about potentially recursive locking on the same lock class. So we no longer need DSA masters to have their own lockdep class. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
There are no legacy ports, DSA registers a devlink instance with ports unconditionally for all switch drivers. Therefore, delete the old-style ndo operations used for determining bridge forwarding domains. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
David S. Miller authored
D. Wythe says: ==================== net/smc: Optimizing performance in short-lived scenarios This patch set aims to optimizing performance of SMC in short-lived links scenarios, which is quite unsatisfactory right now. In our benchmark, we test it with follow scripts: ./wrk -c 10000 -t 4 -H 'Connection: Close' -d 20 http://smc-server Current performance figures like that: Running 20s test @ http://11.213.45.6 4 threads and 10000 connections 4956 requests in 20.06s, 3.24MB read Socket errors: connect 0, read 0, write 672, timeout 0 Requests/sec: 247.07 Transfer/sec: 165.28KB There are many reasons for this phenomenon, this patch set doesn't solve it all though, but it can be well alleviated with it in. Patch 1/5 (Make smc_tcp_listen_work() independent) : Separate smc_tcp_listen_work() from smc_listen_work(), make them independent of each other, the busy SMC handshake can not affect new TCP connections visit any more. Avoid discarding a large number of TCP connections after being overstock, which is undoubtedly raise the connection establishment time. Patch 2/5 (Limit SMC backlog connections): Since patch 1 has separated smc_tcp_listen_work() from smc_listen_work(), an unrestricted TCP accept have come into being. This patch try to put a limit on SMC backlog connections refers to implementation of TCP. Patch 3/5 (Limit SMC visits when handshake workqueue congested): Considering the complexity of SMC handshake right now, in short-lived links scenarios, this may not be the main scenario of SMC though, it's performance is still quite poor. This patch try to provide constraint on SMC handshake when handshake workqueue congested, which is the sign of SMC handshake stacking in our opinion. Patch 4/5 (Dynamic control handshake limitation by socket options) This patch allow applications dynamically control the ability of SMC handshake limitation. Since SMC don't support set SMC socket option before, this patch also have to support SMC's owns socket options. Patch 5/5 (Add global configure for handshake limitation by netlink) This patch provides a way to get benefit of handshake limitation without modifying any code for applications, which is quite useful for most existing applications. After this patch set, performance figures like that: Running 20s test @ http://11.213.45.6 4 threads and 10000 connections 693253 requests in 20.10s, 452.88MB read Requests/sec: 34488.13 Transfer/sec: 22.53MB That's a quite well performance improvement, about to 6 to 7 times in my environment. --- changelog: v1 -> v2: - fix compile warning - fix invalid dependencies in kconfig v2 -> v3: - correct spelling mistakes - fix useless variable declare v3 -> v4 - make smc_tcp_ls_wq be static v4 -> v5 - add dynamic control for SMC auto fallback by socket options - add global configure for SMC auto fallback through netlink v5 -> v6 - move auto fallback to net namespace scope - remove auto fallback attribute in SMC_GEN_SYS_INFO - add independent attributes for auto fallback v6 -> v7 - fix wording and the naming issues, rename 'auto fallback' to handshake limitation. ==================== Signed-off-by:
-
D. Wythe authored
Although we can control SMC handshake limitation through socket options, which means that applications who need it must modify their code. It's quite troublesome for many existing applications. This patch modifies the global default value of SMC handshake limitation through netlink, providing a way to put constraint on handshake without modifies any code for applications. Suggested-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
D. Wythe <alibuda@linux.alibaba.com> Reviewed-by:
-
D. Wythe authored
This patch aims to add dynamic control for SMC handshake limitation for every smc sockets, in production environment, it is possible for the same applications to handle different service types, and may have different opinion on SMC handshake limitation. This patch try socket options to complete it, since we don't have socket option level for SMC yet, which requires us to implement it at the same time. This patch does the following: - add new socket option level: SOL_SMC. - add new SMC socket option: SMC_LIMIT_HS. - provide getter/setter for SMC socket options. Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/ Signed-off-by:
-
D. Wythe authored
This patch intends to provide a mechanism to put constraint on SMC connections visit according to the pressure of SMC handshake process. At present, frequent visits will cause the incoming connections to be backlogged in SMC handshake queue, raise the connections established time. Which is quite unacceptable for those applications who base on short lived connections. There are two ways to implement this mechanism: 1. Put limitation after TCP established. 2. Put limitation before TCP established. In the first way, we need to wait and receive CLC messages that the client will potentially send, and then actively reply with a decline message, in a sense, which is also a sort of SMC handshake, affect the connections established time on its way. In the second way, the only problem is that we need to inject SMC logic into TCP when it is about to reply the incoming SYN, since we already do that, it's seems not a problem anymore. And advantage is obvious, few additional processes are required to complete the constraint. This patch use the second way. After this patch, connections who beyond constraint will not informed any SMC indication, and SMC will not be involved in any of its subsequent processes. Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/ Signed-off-by:
-
D. Wythe authored
Current implementation does not handling backlog semantics, one potential risk is that server will be flooded by infinite amount connections, even if client was SMC-incapable. This patch works to put a limit on backlog connections, referring to the TCP implementation, we divides SMC connections into two categories: 1. Half SMC connection, which includes all TCP established while SMC not connections. 2. Full SMC connection, which includes all SMC established connections. For half SMC connection, since all half SMC connections starts with TCP established, we can achieve our goal by put a limit before TCP established. Refer to the implementation of TCP, this limits will based on not only the half SMC connections but also the full connections, which is also a constraint on full SMC connections. For full SMC connections, although we know exactly where it starts, it's quite hard to put a limit before it. The easiest way is to block wait before receive SMC confirm CLC message, while it's under protection by smc_server_lgr_pending, a global lock, which leads this limit to the entire host instead of a single listen socket. Another way is to drop the full connections, but considering the cast of SMC connections, we prefer to keep full SMC connections. Even so, the limits of full SMC connections still exists, see commits about half SMC connection below. After this patch, the limits of backend connection shows like: For SMC: 1. Client with SMC-capability can makes 2 * backlog full SMC connections or 1 * backlog half SMC connections and 1 * backlog full SMC connections at most. 2. Client without SMC-capability can only makes 1 * backlog half TCP connections and 1 * backlog full TCP connections. Signed-off-by:
-
D. Wythe authored
In multithread and 10K connections benchmark, the backend TCP connection established very slowly, and lots of TCP connections stay in SYN_SENT state. Client: smc_run wrk -c 10000 -t 4 http://server the netstate of server host shows like: 145042 times the listen queue of a socket overflowed 145042 SYNs to LISTEN sockets dropped One reason of this issue is that, since the smc_tcp_listen_work() shared the same workqueue (smc_hs_wq) with smc_listen_work(), while the smc_listen_work() do blocking wait for smc connection established. Once the workqueue became congested, it's will block the accept() from TCP listen. This patch creates a independent workqueue(smc_tcp_ls_wq) for smc_tcp_listen_work(), separate it from smc_listen_work(), which is quite acceptable considering that smc_tcp_listen_work() runs very fast. Signed-off-by:
-
Luiz Angelo Daros de Luca authored
Schema changes: - support for mdio-connected switches (mdio driver), recognized by checking the presence of property "reg" - new compatible strings for rtl8367s and rtl8367rb - "interrupt-controller" was not added as a required property. It might still work polling the ports when missing. Examples changes: - renamed "switch_intc" to make it unique between examples - removed "dsa-mdio" from mdio compatible property - renamed phy@0 to ethernet-phy@0 (not tested with real HW) phy@ requires #phy-cells Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - sparx5: fix get_stat64 out-of-bound access and crash - smc: fix netdev ref tracker misuse Previous releases - regressions: - eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid overflows - eth: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP - bonding: fix rare link activation misses in 802.3ad mode Previous releases - always broken: - tcp: fix tcp sock mem accounting in zero-copy corner cases - remove the cached dst when uncloning an skb dst and its metadata, since we only have one ref it'd lead to an UaF - netfilter: - conntrack: don't refresh sctp entries in closed state - conntrack: re-init state for retransmitted syn-ack, avoid connection establishment getting stuck with strange stacks ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-time fixes to pidfd, clone3, and ir tests" * tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ir: fix build with ancient kernel headers selftests: fixup build warnings in pidfd / clone3 tests pidfd: fix test failure due to stack overflow on some arches
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fixes to the test and usage documentation" * tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: KUnit: Fix usage bug kunit: fix missing f in f-string in run_checks.py
-
Vladimir Oltean authored
Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus) will free the memory backing the mdio_bus as well. Therefore, the mdio_bus->list element is freed memory, but we continue to iterate through the list of MDIO buses using that list element. To fix this, use the proper list iterator that handles element deletion by keeping a copy of the list element next pointer. Fixes: f53a2ce8 ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by:
Rafael Richter <rafael.richter@gin.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-10 Dan Carpenter propagates an error in FEC configuration. Jesse fixes TSO offloads of IPIP and SIT frames. Dave adds a dedicated LAG unregister function to resolve a KASAN error and moves auxiliary device re-creation after LAG removal to the service task to avoid issues with RTNL lock. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() ==================== Link: https://lore.kernel.org/r/20220210170515.2609656-1-anthony.l.nguyen@intel.com Signed-off-by:
-
Colin Foster authored
An ongoing workqueue populates the stats buffer. At the same time, a user might query the statistics. While writing to the buffer is mutex-locked, reading from the buffer wasn't. This could lead to buggy reads by ethtool. This patch fixes the former blamed commit, but the bug was introduced in the latter. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Fixes: 1e1caa97 ("ocelot: Clean up stats update deferred work") Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Reported-by:
-
kernel test robot authored
drivers/net/dsa/qca8k.c:422:37-43: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci Fixes: 90386223 ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet") CC: Ansuel Smith <ansuelsmth@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Dave Ertman authored
If a call to re-create the auxiliary device happens in a context that has already taken the RTNL lock, then the call flow that recreates auxiliary device can hang if there is another attempt to claim the RTNL lock by the auxiliary driver. To avoid this, any call to re-create auxiliary devices that comes from an source that is holding the RTNL lock (e.g. netdev notifier when interface exits a bond) should execute in a separate thread. To accomplish this, add a flag to the PF that will be evaluated in the service task and dealt with there. Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Reviewed-by:
Jonathan Toppins <jtoppins@redhat.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dave Ertman authored
Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces. Fixes: 6a8b3572 ("ice: Respond to a NETDEV_UNREGISTER event for LAG") Signed-off-by:
Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by:
-
- Feb 10, 2022
-
-
Dan Carpenter authored
Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4d ("ice: add link lenient and default override support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
-
Minghao Chi (CGEL ZTE) authored
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kmalloc(). For example: struct switchdev_deferred_item { ... unsigned long data[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Reported-by:Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by:
-
Guillaume Nault authored
Commit 563f8e97 ("ipv4: Stop taking ECN bits into account in fib4-rules") replaced the validation test on frh->tos. While the new test is stricter for ECN bits, it doesn't detect the use of high order DSCP bits. This would be fine if IPv4 could properly handle them. But currently, most IPv4 lookups are done with the three high DSCP bits masked. Therefore, using these bits doesn't lead to the expected result. Let's reject such configurations again, so that nobody starts to use and make any assumption about how the stack handles the three high order DSCP bits in fib4 rules. Fixes: 563f8e97 ("ipv4: Stop taking ECN bits into account in fib4-rules") Signed-off-by:
-
