- Jan 27, 2023
-
-
Fabrizio Castro authored
The RZ/V2M SoC contains an External Power Sequence Controller (PWC) module. This module provides an external power supply on/off sequence, on/off signal for the LPDDR4 core power supply, General Purpose Outputs, and key input signals. This patch adds PWC support to the SoC specific device tree. Signed-off-by:
Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230118144747.24968-2-fabrizio.castro.jz@renesas.com Signed-off-by:
-
Fabrizio Castro authored
Although of_fdt_device_is_available returns true when the DT property "status" is assigned "ok" or "okay", and false for every other value, it's become common practice to assign "disabled" when we want of_fdt_device_is_available to return false. For some reason, the status property of the ethernet node was assigned "disable" when originally added to the kernel. Change it to "disabled" for consistency. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
Adam Ford authored
The Beacon Embedded RZ/G2[MNH] boards all have the same baseboard and all share the same PCB. To make sure all instances appear the same, make the aliases for RZ/G2N and RZ/G2H match RZ/G2M to keep them consistent. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
-
Adam Ford authored
The WM8962 is configured so the SoC is driving the clock, and it's currently set to 24 MHz. However, when playing audio it shows the following message: wm8962 5-001a: Unsupported sysclk ratio 500 While not harmful, a better clock ratio is 512. It makes the message disappear, and it still plays sound. Signed-off-by: -
Adam Ford authored
Due to the part shortage, the AR8031 PHY was replaced with a Micrel KSZ9131. Hard-coding the ID of the PHY makes this new PHY non-operational on newer hardware. Since previous hardware had only shipped to a limited number of people, and they have not gone to production, it should be safe to update the PHY ID. Signed-off-by:
-
Adam Ford authored
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H] boards had a GPIO expander with address 20, but this was changed when the final board went to production. The production boards changed both the part itself and the address. With the incorrect address, the LCD cannot come up. If the LCD fails, the rcar-du driver fails to come up, and that also breaks HDMI. Pre-release board were not shipped to the general public, so it should be safe to push this as a fix. Anyone with a production board would have video fail due to this GPIO expander change. Fixes: a1d8a344 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit") Signed-off-by:
-
Yoshihiro Shimoda authored
Enable UFS device for R-Car S4-8 Spider CPU board. Note that the conditions of RC21012 on the Spider are: - OUT11 (for UFS30_REFCLK_V) is disabled as default. - OUT11 is controlled by GPIO0 pin. - The GPIO0 pin is inverted sense (low active) and pull-up enabled. To output the clock, pin 4 of TCA9554 on the Spider board needs to output low level so that using "gpio-gate-clock" for it. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
-
- Jan 26, 2023
-
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add a "Simple Audio Card + MIXer + TDM Split" DT setting file for ULCB/KF. Because of the limited number of subdevices, the HDMI output is ignored. This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add an "Audio Graph Card + MIXer + TDM Split" DT setting file for ULCB/KF. Because of the limited number of subdevices, the HDMI output is ignored. This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add an "Audio Graph Card2 + MIXer + TDM Split" DT setting file for ULCB/KF. Because of the limited number of subdevices, the HDMI output is ignored. This setting can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add a "Simple Audio Card" DT setting file for ULCB/KF. This can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add an "Audio Graph Card2" DT setting file for ULCB/KF, and switch to use it. You can switch to a different Generic Audio Graph driver by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
-
Kuninori Morimoto authored
ALSA SoC has many types of Generic Audio Card drivers (Simple Audio Card, Audio Graph Card, Audio Graph Card2), and Renesas/Kuninori Morimoto wants to test these. The Generic Audio Card driver had been requested on ALSA SoC. It supports many types of device connection methods, and historically, the requested connection support range of the generic driver has been upgraded. Upgrading the connection support range itself could not be implemented in the generic driver, because we need to keep compatibility with old DTBs. This is one of the reasons why we have many types of Generic Audio Card driver. The ULCB/KF combo is a good board stack to test these. Kuninori has been testing these Generic Audio Card drivers by using his local patches to switching drivers. But from an information sharing point of view, it is a good idea to upstream these, because the DT configuration is complex. Hence this can be a good sample for the user. Hence add an "Audio Graph Card" DT setting file for ULCB/KF. This can be enabled by updating ulcb.dtsi / ulcb-kf.dtsi. From a normal user point of view who doesn't need to test the driver, everything should stay as-is, and nothing changes. Note that because this needs "switching driver", and not "adding extra feature", this does not use a Device Tree overlay. Signed-off-by:
-
Kuninori Morimoto authored
Current sound comment is indicating that #sound-dai-cells is required, but it is needed only if board is using "simple-card". Hence tidy up the comments. As ulcb.dtsi and salvator-common.dtsi are already using "audio-graph", the unneeded #sound-dai-cells are removed. Signed-off-by:
-
Kuninori Morimoto authored
Current sound comment is indicating that #sound-dai-cells is required, but it is needed only if the board is using "simple-card". Hence tidy up the comments. Signed-off-by:
-
Geert Uytterhoeven authored
Describe the external SCIF clock crystal, which can be used as a clock source for the (High Speed) Serial Communication Interfaces with FIFO. This improves serial console accuracy from 115200-257 bps to 115200+0 bps. Signed-off-by:
-
Herve Codina authored
Add the USBF controller available in the r9a06g032 SoC. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Reviewed-by:
-
Lad Prabhakar authored
The PHY interrupt (INT_N) pin is connected to IRQ2 and IRQ7 for ETH0 and ETH1 respectively. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Add required properties in pinctrl node to handle GPIO interrupts. Note as IRQC is not enabled in RZ/Five the phandle for interrupt-parent is added in RZ/G2UL specific dtsi so that RZ/Five pinctrl driver continues without waiting for IRQC to probe. Signed-off-by:
-
Lad Prabhakar authored
Add IRQC node to R9A07G043 (RZ/G2UL) SoC DTSI. Signed-off-by:
-
Lad Prabhakar authored
IRQC support for RZ/Five is still missing so drop the interrupts and interrupt-parent properties from the PHY nodes of ETH{0,1}. Signed-off-by: -
Geert Uytterhoeven authored
Add an operating point for running the Cortex-A76 CPU cores on R-Car V4H at 1.8 GHz (High Performance mode). Based on a patch in the BSP by Tho Vu. Signed-off-by:
-
- Jan 23, 2023
-
-
Laurent Pinchart authored
Now that a header exists with macros for the media interface bus-type values, replace hardcoding numerical constants with the corresponding macros in the DT sources. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
- Jan 13, 2023
-
-
Wolfram Sang authored
HS400 support for R-Car V3H ES2.0 has been fixed, so enable it on this board. Signed-off-by:
LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Adam Ford authored
Each kit-level file represents a SOM + baseboard for a specific SoC type and uses specific clocks unique to each SoC. With the exception of one clock, the rest of the clock info was duplicated. There is a generic clock called CPG_AUDIO_CLK_I defined in each of the SoC DTSI files which points to this unique clock. By using that, the clock information for the rcar_sound can be consolidated into the baseboard file and have it reference this generic clock thus removing the duplication from the three variants. Signed-off-by:
-
Lad Prabhakar authored
Enable OSTM{1,2} nodes on RZ/Five SMARC SoM. Note, OSTM{1,2} nodes are enabled in the RZ/G2UL SMARC SoM DTSI [0] hence deleting the disabled nodes from RZ/Five SMARC SoM DTSI enables it here too as we include [0] in RZ/Five SMARC SoM DTSI. [0] arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi Signed-off-by: -
Geert Uytterhoeven authored
"make dtbs_check": arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dtb: i2c-switch@71: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4', 'i2c@7' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming all PCA9548 nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. While at it, rename the labels too, for uniformity. Signed-off-by:
-
- Jan 10, 2023
-
-
Fabrizio Castro authored
The RZ/V2M comes with 2 SDHI interfaces and 1 eMMC interface. Add the relevant nodes to the SoC specific device tree. Signed-off-by:
-
Tomi Valkeinen authored
Add DT nodes needed for the mini DP connector. The DP is driven by sn65dsi86, which in turn gets the pixel data from the SoC via DSI. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Tomi Valkeinen authored
Add DT nodes for components needed to get the DSI output working: - FCPv - VSPd - DU - DSI Signed-off-by:
-
Geert Uytterhoeven authored
Add operating points for running the Cortex-A55 CPU cores on R-Car S4-8 at various speeds, up to the maximum supported frequency (1200 MHz). R-Car S4-8 has 8 Cortex-A55 cores, grouped in 4 clusters. CA55 Sub-System 0 (first 2 clusters / CPU cores 0-3) is clocked by Z0φ. CA55 Sub-System 1 (last 2 clusters / CPU cores 4-7) is clocked by Z1φ. As the two sets of clusters are driven by separate clocks, this requires specifying two separate tables (using the same operating performance point values), with "opp-shared" to indicate that the CPU cores in each set share state. Based on a patch in the BSP by Tho Vu. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/ae78351d702a53702a1d5fa26675fe982b99cdf5.1669817508.git.geert+renesas@glider.be
-
- Dec 26, 2022
-
-
Lad Prabhakar authored
Enable WDT node on RZ/Five SMARC SoM. Note, WDT block is enabled in RZ/G2UL SMARC SoM DTSI [0] hence deleting the disabled node from RZ/Five SMARC SoM DTSI enables it here too as we include [0] in RZ/Five SMARC SoM DTSI. [0] arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi Signed-off-by:
-
Linus Torvalds authored
-
Steven Rostedt (Google) authored
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by:Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Dec 24, 2022
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fix from Mark Brown: "One driver specific change here which handles the case where a SPI device for some reason tries to change the bus speed during a message on fsl_spi hardware, this should be very unusual" * tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl_spi: Don't change speed while chipselect is active
-
Linus Torvalds authored
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two core fixes here, one for a long standing race which some Qualcomm systems have started triggering with their UFS driver and another fixing a problem with supply lookup introduced by the fixes for devm related use after free issues that were introduced in this merge window" * tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix deadlock on regulator enable regulator: core: Fix resolve supply lookup issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccicheck update from Julia Lawall: "Modernize use of grep in coccicheck: Use 'grep -E' instead of 'egrep'" * tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: use "grep -E" instead of "egrep"
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull kernel hardening fixes from Kees Cook: - Fix CFI failure with KASAN (Sami Tolvanen) - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko) - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan Chancellor) - Ignore "contents" argument in LoadPin's LSM hook handling - Fix paste-o in /sys/kernel/warn_count API docs - Use READ_ONCE() consistently for oops/warn limit reading * tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: cfi: Fix CFI failure with KASAN exit: Use READ_ONCE() for all oops/warn limit reads security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 lkdtm: cfi: Make PAC test work with GCC 7 and 8 docs: Fix path paste-o for /sys/kernel/warn_count LoadPin: Ignore the "contents" argument of the LSM hooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Switch pmsg_lock to an rt_mutex to avoid priority inversion (John Stultz) - Correctly assign mem_type property (Luca Stefani) * tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Properly assign mem_type property pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA allocator, as it copes with that just as badly as the coherent allocator, and then add a check to make sure no one passes the flag ever again" * tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reject GFP_COMP for noncoherent allocations ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
-
