- Sep 05, 2012
-
-
Jens Taprogge authored
During initialization we configure the TPCI200 so it does not swap data lanes on IndustryPack module access. The read and write functions are changed accordingly. We are taking this approach in the hope that all IP Carriers are able to present the Module memory layout unchanged. We can thus directly access the memory and registers of IP Modules without having to rely on the read and write wrappers currently exposed in ipack_bus_opts. A later patch will convert the existing driver and remove the wrappers. Signed-off-by:
Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by:
Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Taprogge authored
These changes make it easier to add more initialization steps later on. Signed-off-by:
-
Devendra Naga authored
the kzalloc does allocates memory and sets the data at the memory which is allocated to 0, The driver does uses the kmalloc and memset at some points in the code replace them with a single call to kzalloc Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Acked-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Devendra Naga authored
as per Documentation/CodingStyle, casting of void pointer to any other pointer is not needed Signed-off-by:
-
Priit Laes authored
Signed-off-by:
Priit Laes <plaes@plaes.org> Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Priit Laes authored
Signed-off-by:
-
Alexey Khoroshilov authored
Convert printk(KERN_INFO to pr_info( and printk(KERN_ERR to pr_err(. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Kevin McKinney <klmckinney1@gmail.com> Signed-off-by:
-
Alexey Khoroshilov authored
bcm_init() does not have proper error handling of usb_register(). The patch implements one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Kevin McKinney authored
This patch converts INT to int in InterfaceInit.h Signed-off-by:
-
Kevin McKinney authored
This patch fixes white space issue in InterfaceInit.h as reported by checkpatch.pl. Signed-off-by:
-
Justin P. Mattock authored
Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
Devendra Naga authored
remove the spaces and replace with tabs at the beginning of a line and also remove space between function call and its open paranthesis Signed-off-by:
-
Devendra Naga authored
The error codes the kernel functions return are -ve numbers, convert this function to follow the other kernel functions Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Devendra Naga authored
the name is not initialised and passed to the function smtc_alloc_fb_info and copies the name into a member of fb structure. copy the name before calling alloc_fb_info. Signed-off-by:
Javier Muñoz <jmunhoz@igalia.com> Signed-off-by:
-
Dae S. Kim authored
Little cleanups. Enum value ANDROID_ALARM_TYPE_COUNT was treated as an alarm type within a switch statement. That condition was unreachable though. Signed-off-by:
Dae S. Kim <dae@velatum.com> Signed-off-by:
-
Devendra Naga authored
we request_firmware in slic_card_download_gbrcv and we return out with out calling release_firmware, where we compare against a firmware lengths of certain device ids. Signed-off-by:
-
Devendra Naga authored
when the device id doesn't match in slic_card_download_gbrcv the filename is "", i.e an empty name, and we try calling request_firmware with that name, actually we can just fail out at default case before even calling request_firmware Signed-off-by:
-
Devendra Naga authored
the port was kzalloced but the print statement says that its kmalloc. Signed-off-by:
-
Devendra Naga authored
use the module_i2c_driver and remove the reimplementation of module_i2c_driver Signed-off-by:
-
Devendra Naga authored
warnings: drivers/staging/sbe-2t3e3/netdev.c:24:5: warning: symbol 't3e3_ioctl' was not declared. Should it be static? drivers/staging/sbe-2t3e3/netdev.c:85:5: warning: symbol 't3e3_open' was not declared. Should it be static? drivers/staging/sbe-2t3e3/netdev.c:100:5: warning: symbol 't3e3_close' was not declared. Should it be static? Signed-off-by:
-
Devendra Naga authored
warnings: drivers/staging/sbe-2t3e3/netdev.c:30:56: warning: incorrect type in initializer (different address spaces) drivers/staging/sbe-2t3e3/netdev.c:30:56: expected void *data drivers/staging/sbe-2t3e3/netdev.c:30:56: got void [noderef] <asn:1>* drivers/staging/sbe-2t3e3/netdev.c:48:44: warning: incorrect type in argument 2 (different address spaces) drivers/staging/sbe-2t3e3/netdev.c:48:44: expected void const [noderef] <asn:1>*from drivers/staging/sbe-2t3e3/netdev.c:48:44: got void *data drivers/staging/sbe-2t3e3/netdev.c:54:34: warning: incorrect type in argument 1 (different address spaces) drivers/staging/sbe-2t3e3/netdev.c:54:34: expected void [noderef] <asn:1>*dst drivers/staging/sbe-2t3e3/netdev.c:54:34: got void *data type must be __user. Signed-off-by:
-
Julia Lawall authored
Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Wei Yongjun authored
psFwInfo has been allocated in this function and should be freed before leaving from the error handling cases. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/ ) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Using is_zero_ether_addr() to simplify the code Signed-off-by:
-
Wei Yongjun authored
Using is_zero_ether_addr() instead of directly use memcmp(addr, "\x00\x00\x00\x00\x00\x00", ETH_ALEN) to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/ ) Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
This driver has a number of defines, etc. that are not used. Signed-off-by:
-
Larry Finger authored
The driver has a dev_alloc_skb() and an skb_clone() call that are not checked for failure. Signed-off-by:
-
