- Jul 31, 2006
-
-
Mike Kravetz authored
Move all the Hypervisor call definitions to to a single header file. Signed-off-by:
Mike Kravetz <kravetz@us.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Jeremy Kerr authored
Use BUG_ON rather than BUG to simplify the dma_ops handing, and remove the now-unnecessary return cases. Booted on pseries. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Jeremy Kerr authored
Previous changes have treated the return values of get_property as const, so now we can make the actual change to get_property(). There shouldn't be a need to cast the return values anymore. We will now get compiler warnings when property values are assigned to a non-const variable. If properties need to be updated, there's still the of_find_property function. Built for cell_defconfig, chrp32_defconfig, g5_defconfig, iseries_defconfig, maple_defconfig, pmac32_defconfig, ppc64_defconfig and pseries_defconfig. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. tsi108 driver changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. sata_svw changes Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. tpm_atmel changes Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc-specific sound driver changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc-specific network device driver changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc-specific scsi driver changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc-specific video & agp driver changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. maple platform changes. Built for maple_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. chrp platform changes. Built for chrp32_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. cell platform changes. Built for cell_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. mpc* platform changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. iseries platform changes. Built for iseries_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. pseries platform changes. Built for pseries_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by:
-
Andrew Morton authored
drivers/char/briq_panel.c:28:22: error: asm/prom.h: No such file or directory Cc: Jeremy Kerr <jk@ozlabs.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
- Jul 14, 2006
-
-
Stephen Rothwell authored
-
Michael Ellerman authored
Although we pass the address of an iommu_table_cb to HvCallXm_getTceTableParms, we don't actually need the structure definition anywhere except in the iseries iommu code, so move the struct in there. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au>
-
- Jul 13, 2006
-
-
Stephen Rothwell authored
-
Stephen Rothwell authored
Also remove unnecessary reference to struct HvLpEvent. Signed-off-by: -
Stephen Rothwell authored
Signed-off-by: -
Stephen Rothwell authored
So the iSeries console will be faster since it can send up to 200 bytes at a time to the Hypervisor. This only affects the tty part of the console, the console writes are still in 16 byte lots. Signed-off-by: -
Stephen Rothwell authored
This driver uses the hvc_console.c infrastructure that is used by the pSeries virtual and RTAS consoles. This will allow us to make viocons.c obsolete and is another step along the way to a combined kernel (as viocons could not coexist with CONFIG_VT). Signed-off-by: -
Michael Ellerman authored
The compiler doesn't understand that BUG() never returns, so complains that psize isn't set. Just set it to the normal value, which seems to produce nice code and keeps gcc happy. Signed-off-by:
-
Michael Ellerman authored
PhbId might be used unitialised, so set it to 0xff (nothing) always. Signed-off-by:
-
Michael Ellerman authored
iSeries_Get_Location_Code() has error paths, but currently returns void, so give it a return code and only print the output if it returns successfully. Gcc isn't smart enough to be quiet though, so set frame to 0 to shut it up. Signed-off-by:
-
Michael Ellerman authored
Move ItLpNaca into platforms/iseries now that it's not used elsewhere. Signed-off-by:
-
Michael Ellerman authored
HvLpConfig_get(Primary)LpIndex are currently static inlines that return fields from the itLpNaca, if we make them real functions we can make the itLpNaca private to iSeries. Signed-off-by:
-
Michael Ellerman authored
No one outside platforms/iseries needs ItExtVpdPanel anymore, so move it in there. It used to be needed by lparcfg, and so was exported, but isn't needed anymore, so unexport it. Signed-off-by:
-
Michael Ellerman authored
e2a() was formally used by lparcfg, and so had to be exported, but isn't anymore, so don't. e2a() and strne2a() can both be static, and __init. And e2a can be made much more concise if we use x ... y case labels, while we're there add support for lower case letters. Signed-off-by:
-
Michael Ellerman authored
The ASCII -> EBCDIC functions, e2a() and strne2a() are now only used in dt.c, so move them in there. Signed-off-by:
-
Michael Ellerman authored
We export a bunch of info in /proc/iSeries/config. Currently we pull it directly out of some iSeries specific structs, but we could use the device tree instead, this saves decoding it twice and is a little neater. Signed-off-by:
-
- Jul 07, 2006
-
-
Jeremy Kerr authored
The linux,pci-domain property is no longer used by DLPAR/PCI Hotplug utilites, or LSVPD. This change removes it. Built for ppc64_defconfig. Signed-off-by:
-
Jeremy Kerr authored
The of_bus callbacks map and get_flags can be constified, as they don't alter the range or addr arguments. of_dump_addr and of_read_addr can also be constified. Built for 32- and 64-bit powerpc Signed-off-by:
-
Jeremy Kerr authored
The linux,device property isn't used anywhere within the kernel, and since it's a kernel pointer, it's a little useless for userspace. This change removes the code to create this property in of_device_register. Built for pmac32. Signed-off-by:
-
Benjamin Herrenschmidt authored
The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by:
-
Benjamin Herrenschmidt authored
The thermal control for the Xserve G5s had a few issues. For one, the way to program the RPM fans speeds into the FCU is different between it and the desktop models, which I didn't figure out until recently, and it was missing a control loop for the slots fan, running it too fast. Both of those problems were causing the machine to be much more noisy than necessary. This patch also changes the fixed value of the slots fan for desktop G5s to 40% instead of 50%. It seems to still have a pretty good airflow that way and is much less noisy. Signed-off-by:
-
