- Feb 04, 2008
-
-
Juergen Beisert authored
This patch adds a PXA2xx specific header file to control chip setup. Without, the PCM027 BSP can't be built. Signed-off-by:
Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by:
Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
eric miao authored
The is caused by the patch below: [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix It renamed the confusing get_hsync_len() to get_hsync_invperiod(), which unfortunately leaves poodle.c un-modified. Signed-off-by:
eric miao <eric.miao@marvell.com> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
eric miao authored
Some machines are missing "pxa2xx-regs.h" due to the following patch: [ARM] pxa: move memory controller registers into pxa2xx-regs.h This patch fixes the issue by including the pxa2xx-regs.h where necessary. Signed-off-by:
-
eric miao authored
Introduce a sysdev for pxa3xx static memory controller, mainly for register saving/restoring in PM Signed-off-by:
-
eric miao authored
1. clear RDH bit after resuming back from D3, otherwise, the multi function pins will retain the low power state 2. save/restore essential system registers Signed-off-by:
-
eric miao authored
Signed-off-by:
-
eric miao authored
Signed-off-by:
-
eric miao authored
The header file <asm/arch/ohci.h> was missing in the original file, include it to fix the warning. Signed-off-by:
-
eric miao authored
Signed-off-by:
-
- Feb 02, 2008
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: apm_power: check I.intval for zero value, we use it as the divisor MAINTAINERS: remove kernel-discuss@handhelds.org list pda_power: implement polling pda_power: various cleanups apm_power: support using VOLTAGE_* properties for apm calculations pda_power: add suspend/resume support power_supply: add few more values and props pda_power: only register available psu power: fix incorrect unregistration in power_supply_create_attrs error path power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL [BATTERY] power_supply_leds: use kasprintf [BATTERY] Every file should include the headers containing the prototypes for its global functions.
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-linus' of git://linux-nfs.org/~bfields/linux: (100 commits) SUNRPC: RPC program information is stored in unsigned integers SUNRPC: Move exported symbol definitions after function declaration part 2 NLM: tear down RPC clients in nlm_shutdown_hosts SUNRPC: spin svc_rqst initialization to its own function nfsd: more careful input validation in nfsctl write methods lockd: minor log message fix knfsd: don't bother mapping putrootfh enoent to eperm rdma: makefile rdma: ONCRPC RDMA protocol marshalling rdma: SVCRDMA sendto rdma: SVCRDMA recvfrom rdma: SVCRDMA Core Transport Services rdma: SVCRDMA Transport Module rdma: SVCRMDA Header File svc: Add svc_xprt_names service to replace svc_sock_names knfsd: Support adding transports by writing portlist file svc: Add svc API that queries for a transport instance svc: Add /proc/sys/sunrpc/transport files svc: Add transport hdr size for defer/revisit svc: Move t...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (38 commits) suspend: cleanup reference to swsusp_pg_dir[] PM: Remove obsolete /sys/devices/.../power/state docs Hibernation: Invoke suspend notifications after console switch Suspend: Invoke suspend notifications after console switch Suspend: Clean up suspend_64.c Suspend: Add config option to disable the freezer if architecture wants that ACPI: Print message before calling _PTS ACPI hibernation: Call _PTS before suspending devices Hibernation: Introduce begin() and end() callbacks ACPI suspend: Call _PTS before suspending devices ACPI: Separate disabling of GPEs from _PTS ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK Suspend: Introduce begin() and end() callbacks suspend: fix ia64 allmodconfig build ACPI: clear GPE earily in resume to avoid warning Suspend: Clean up Kconfig (V2) Hib...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (128 commits) USB: fix codingstyle issues in drivers/usb/core/*.c USB: fix codingstyle issues in drivers/usb/core/message.c USB: fix codingstyle issues in drivers/usb/core/hcd-pci.c USB: fix codingstyle issues in drivers/usb/core/devio.c USB: fix codingstyle issues in drivers/usb/core/devices.c USB: fix codingstyle issues in drivers/usb/core/*.h USB: fix codingstyle issues in include/linux/usb/ USB: fix codingstyle issues in include/linux/usb.h USB: mark USB drivers as being GPL only USB: use a real vendor and product id for root hubs USB: mount options: fix usbfs USB: Fix usb_serial_driver structure for Kobil cardreader driver. usb: ehci should use u16 for isochronous intervals usb: ehci, remove false clear-reset path USB: Use menuconfig objects usb: ohci-sm501 driver usb: dma bounce buffer support USB: last abuses of intfdata in close for usb-serial drivers USB: kl5kusb105 don't flush to logically disconnected devices USB: oti6858: cleanup ...
-
Peter Zijlstra authored
Rafael J. Wysocki reported weird, multi-seconds delays during suspend/resume and bisected it back to: commit 82a1fcb9 Author: Ingo Molnar <mingo@elte.hu> Date: Fri Jan 25 21:08:02 2008 +0100 softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks fix it: - restore the old wakeup mechanism - fix break usage in do_each_thread() { } while_each_thread(). - fix the hotplug switch stmt, a fall-through case was broken. Bisected-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
Signed-off-by:Anton Vorontsov <cbou@mail.ru>
-
Anton Vorontsov authored
kernel-discuss at handhelds.org is down for months, and nobody knows why. So remove it for now. Signed-off-by: -
Anton Vorontsov authored
Signed-off-by: -
Anton Vorontsov authored
- handle spurious interrupts correctly; - get rid of pda_power_supplies array, use two variables instead; - factor out psy_changed() function, it will be used for polling. Signed-off-by: -
Dmitry Baryshkov authored
It's pretty dummy, but useful for batteries for which we can only get voltages. Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
Add suspend/resume/wakeup support for pda_power. Signed-off-by:
-
Dmitry Baryshkov authored
Add LiMn (one of the most common for small non-rechargable batteries) battery technology and voltage_min/_max properties support. Signed-off-by:
-
Dmitry Baryshkov authored
Currently pda-power adds both ac and usb power supply units. This patch fixes it so that psu are added only if they are enabled. Signed-off-by:
-
Andres Salomon authored
In power_supply_create_attrs(), we create static attributes as referenced by power_supply_static_attrs[i]. After that, if we fail, we unregister via power_supply_static_attrs[psy->properties[i]]. This is incorrect, as psy->properties has absolutely no bearing on static attribs. This patch fixes it to unregister the correct attrib. Another line which was unnecessarily line wrapped is also unwrapped. Signed-off-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Andres Salomon authored
The CAPACITY_LEVEL stuff defines various levels of charge; however, what is the difference between them? What differentiates between HIGH and NORMAL, LOW and CRITICAL, etc? As it appears that these are fairly arbitrary, we end up making such policy decisions in the kernel (or in hardware). This is the sort of decision that should be made in userspace, not in the kernel. If the hardware does not support _CAPACITY and it cannot be easily calculated, then perhaps the driver should register a custom CAPACITY_LEVEL attribute; however, userspace should not become accustomed to looking for such a thing, and we should certainly not encourage drivers to provide CAPACITY_LEVEL stubs. The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The OLPC battery driver is the only driver making use of this, so it's removed from there as well. Signed-off-by:
-
Akinobu Mita authored
Use kasprintf instead of kmalloc()-strcpy()-strcat(). Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rafael J. Wysocki authored
swsusp_pg_dir[] is used for suspend, but not for hibernation. clean-up the ifdefs which worked by accident, while implying the opposite. Delete the __nosavedata, which also implied the opposite. Some day we may optimize CONFIG_ACPI_SLEEP to build minimal kernels for just hibernate or just suspend but not both, but today isn't that day. Signed-off-by:
Len Brown <len.brown@intel.com>
-
David Brownell authored
The /sys/devices/.../power/state files have been gone for a while now, but I just noticed some documentation that still refers to them. (Fortunately described as DEPRECATED and WILL REMOVE). Time to remove that obsolete documentation too ... Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Following the recent change in the suspend code path, switch consoles before calling PM notifiers during hibernation. Signed-off-by:
-
Johannes Berg authored
In order to fix APM emulation it is necessary to enable apm-emulation notifications for suspends triggered in various ways via the suspend notifiers. However, this will cause the systems using APM emulation to lock up between X being needed to switch away from the VT and X already waiting for resume in the APM ioctl. This patch moves the console switch (if enabled) before the suspend notification (and after the resume notification) to avoid this issue. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Borislav Petkov authored
There's a freakishly long comment in suspend_64.c, shorten it. Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Acked-by:
-
Johannes Berg authored
This patch makes the freezer optional for suspend to allow the system to work (or not work) like the original PMU suspend. Signed-off-by:
-
Rafael J. Wysocki authored
Make acpi_sleep_prepare() static and cause it to print a message specifying the ACPI system sleep state to be entered (helpful for debugging the suspend/hibernation code). Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
The ACPI 1.0 specification wants us to put devices into low power states after executing the _PTS global control method, while ACPI 2.0 and later want us to do that in the reverse order. The current hibernation code follows ACPI 2.0 in that respect which may cause some ACPI 1.0x systems to hang during hibernation (ref. http://bugzilla.kernel.org/show_bug.cgi?id=9528 ). Make the hibernation code execute _PTS before putting devices into low power states (ie. in accordance with ACPI 1.0x) with the possibility to override that using the 'acpi_new_pts_ordering' kernel command line option. Signed-off-by:
-
Rafael J. Wysocki authored
Introduce global hibernation callback .end() and rename global hibernation callback .start() to .begin(), in analogy with the recent modifications of the global suspend callbacks. Signed-off-by:
-
Rafael J. Wysocki authored
The ACPI 1.0 specification wants us to put devices into low power states after executing the _PTS global control method, while ACPI 2.0 and later want us to do that in the reverse order. The current suspend code follows ACPI 2.0 in that respect which causes some ACPI 1.0x systems to hang during suspend (ref. http://bugzilla.kernel.org/show_bug.cgi?id=9528 ). Make the suspend code execute _PTS before putting devices into low power states (ie. in accordance with ACPI 1.0x) and provide a command line option to override the default if need be. Signed-off-by:
-
Rafael J. Wysocki authored
The preparation to enter an ACPI system sleep state is now tied to the disabling of GPEs, but the GPEs should not be disabled before suspending devices. Since on ACPI 1.0x systems the _PTS global control method should be executed before suspending devices, we need to disable GPEs separately. Signed-off-by:
-
Rafael J. Wysocki authored
The execution of ACPI global control methods _GTS and _BFS is currently tied to the preparation to enter a sleep state and to the leaving of the sleep state, respectively. However, these functions are called before disabling the nonboot CPUs and after enabling them, respectively (in fact, on ACPI 1.0x systems the first of them ought to be called before suspending devices), while according to the ACPI specification, _GTS is to be executed right prior to entering the system sleep state and _BFS is to be executed right after the platfor firmware has returned control to the OS on wake up. Move the execution of _GTS and _BFS to the right places. Signed-off-by:
-
Rafael J. Wysocki authored
On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails. All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful. Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by:
-
