- Dec 16, 2023
-
-
Syed Saba Kareem authored
Add pm ops for renoir platform. Signed-off-by:
Syed Saba Kareem <Syed.SabaKareem@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://msgid.link/r/20231215130300.1247475-1-Syed.SabaKareem@amd.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: We should query FW config if context save is supported, and no need to reload FW if hda->booted_from_imr and ipc4_data->fw_context_save are true.
-
- Dec 15, 2023
-
-
Wang Jinchao authored
rm the second \#include <linux/of.h> Signed-off-by:
Wang Jinchao <wangjinchao@xfusion.com> Link: https://msgid.link/r/202312151713+0800-wangjinchao@xfusion.com Signed-off-by:
-
Wang Jinchao authored
remove the second \#include "../sof-audio.h" Signed-off-by:
-
Rander Wang authored
If fw_context_save is defined by fw, driver can skip library reload on d3 exit or reload library. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20231215083102.3064200-4-yung-chuan.liao@linux.intel.com Signed-off-by:
-
Rander Wang authored
Driver queries fw_context_save feature when fw is ready and can skip library reload with this feature since library is saved in persistent memory. The default value of fw_context_save is true unless fw reports false. Signed-off-by:
-
Rander Wang authored
Update fw_config_params in driver. Signed-off-by:
-
- Dec 14, 2023
-
-
Daniel Baluta authored
Document new playback-only and capture-only flags which can be used when dai link can only support just one direction: playback or capture but not both. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/20231128081119.106360-3-daniel.baluta@oss.nxp.com Signed-off-by:
-
Daniel Baluta authored
We need this to support MICFIL PDM found on i.MX8MP where the DAI link supports only capture direction. Signed-off-by:
-
- Dec 13, 2023
-
-
Daniel Golle authored
If probe is defered no error should be printed. Use dev_err_probe() to have it muted. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Maso Huang <maso.huang@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://msgid.link/r/b941a404d97c01ef3e30c49925927b9a7dafeb19.1702422544.git.daniel@makrotopia.org Signed-off-by:
-
- Dec 12, 2023
-
-
Charles Keepax authored
Fixes: bbbc18d8 ("ASoC: cs42l43: Allow HP amp to cool off after current limit") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://msgid.link/r/20231212104149.2388753-1-ckeepax@opensource.cirrus.com Signed-off-by:
-
Charles Keepax authored
Whilst occasional current limiting is fine, constant current limiting should be avoided. Add a back off system that will disable the headphone amp, if a lot of current limiting is seen in a short window of time. Signed-off-by:
-
- Dec 11, 2023
-
-
Neil Armstrong authored
This fix is based on commit [1] fixing click and pop sounds during SoundWire port start because PA is left unmuted. making use of new mute_unmute_on_trigger flag and removing unmute at PA setup, removes the Click/Pop issue at SoundWire enable. [1] 805ce818 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://msgid.link/r/20231211-topic-sm8x50-upstream-wsa884x-fix-plop-v1-1-0dc630a19172@linaro.org Signed-off-by:
-
Krzysztof Kozlowski authored
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) WSA macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://msgid.link/r/20231129113014.38837-4-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Krzysztof Kozlowski authored
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) VA macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) TX macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) RX macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add support four channel streams. Map channel 3 and 4 to left/right surround ("quad(side)" from ffmpeg standard channel list) to match what is in qdsp6/q6dsp-common.c driver. Signed-off-by: -
Krzysztof Kozlowski authored
q6apm.h header already defines channel mapping values, so drop duplicated devices from audioreach.h. Signed-off-by:
-
Krzysztof Kozlowski authored
Move code assigning channel mapping values to a common helper function. This simplifies three out of four cases, with the last case using incompatible type (uint16_t array instead of uint8_t array). Signed-off-by:
-
- Dec 10, 2023
-
-
Linus Walleij authored
The GPIO descriptor conversion patch left an unitialized ret behind by mistake, fix it by getting rid of the variable altogether. Fixes: 10a366f3 ("ASoC: wm1250-ev1: Convert to GPIO descriptors") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312090953.DiUo3mue-lkp@intel.com/ Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231209-descriptors-sound-wlf-v1-1-5b885ce43ae1@linaro.org Signed-off-by:
-
- Dec 09, 2023
-
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: This converts the remaining Wolfson ASoC codecs to use GPIO descriptors. These Wolfson codecs are mostly used with different Samsung S3C (especially Cragganmore 6410) board files, so the in-tree users are fixed up in the process.
-
- Dec 08, 2023
-
-
Linus Walleij authored
This converts the WM8996 codec to use GPIO descriptors, an a similar way to WM5100. The driver is instantiating a GPIO chip named wm8996, and we get rid of the base address for the GPIO chip from the platform data and just use dynamic numbering. Move base and ngpio into the static gpio_chip template. Fix up the only in-tree user which is the Cragganmore 6410 module. Signed-off-by:
-
Linus Walleij authored
This converts the WM5100 codec to use GPIO descriptors, a pretty straight-forward conversion with the following peculiarities: - The driver is instantiating a GPIO chip named wm5100, and the headphone polarity detection GPIO is lifted from there. We add this to the GPIO descriptor table as well, and we can then get rid of also the base address for the GPIO chip from the platform data and just use dynamic numbering. - Fix up the only in-tree user which is the Cragganmore 6410 module. Signed-off-by:
-
Linus Walleij authored
This converts the WM2200 codec to use GPIO descriptors. This is a pretty straight-forward conversion, and it also switches over the single in-tree user in the S3C Cragganmore module for S3C 6410. This coded does not seem to get selected or be selectable through Kconfig, I had to hack another soundcard Kconfig entry to select it for compile tests. Signed-off-by:
-
Linus Walleij authored
This converts the WM1250-EV1 codec to use GPIO descriptors. It turns out that the platform data was only used to pass some global GPIO numbers from a board file, so we get rid of this and also switch over the single in-tree user in the S3C Cragganmore module for S3C 6410. The driver obtains two GPIO lines named OSR and master and just pull them low, we leave this behaviour as it was. Signed-off-by:
-
Linus Walleij authored
This converts the WM0010 codec to use GPIO descriptors. It's a pretty straight-forward conversion also switching over the single in-tree user in the S3C Cragganmore module for S3C 6410. Signed-off-by:
-
- Dec 07, 2023
-
-
Dan Carpenter authored
The > comparison should be >= to avoid writing one element beyond the end of the dai_link->ch_maps[] array. The dai_link->ch_maps[] array is allocated in graph_parse_node_multi() and it has "nm_max" elements. Fixes: e2de6808 ("ASoC: audio-graph-card2: add CPU:Codec = N:M support") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1032216f-902f-48f9-aa49-9d5ece8e87f2@moroto.mountain Signed-off-by:
-
Vijendar Mukunda authored
Modify acp config flag read logic from ACP v7.0 onwards. Instead of reading from DMI table match entry, read the config flag value from BIOS ACPI table. This will remove updating DMI table when new platform support is added. Use FLAG_AMD_LEGACY_ONLY_DMIC flag as default one. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20231207045505.1519151-1-Vijendar.Mukunda@amd.com Signed-off-by:
-
Peter Ujfalusi authored
The current code flow is: 1. snd_hdac_device_register() 2. set parameters needed by the hdac driver 3. request_codec_module() the hdac driver is probed at this point During boot the codec drivers are not loaded when the hdac device is registered, it is going to be probed later when loading the codec module, which point the parameters are set. On module remove/insert rmmod snd_sof_pci_intel_tgl modprobe snd_sof_pci_intel_tgl The codec module remains loaded and the driver will be probed when the hdac device is created right away, before the parameters for the driver has been configured: 1. snd_hdac_device_register() the hdac driver is probed at this point 2. set parameters needed by the hdac driver 3. request_codec_module() will be a NOP as the module is already loaded Move the snd_hdac_device_register() later, to be done right before requesting the codec module to make sure that the parameters are all set before the device is created: 1. set parameters needed by the hdac driver 2. snd_hdac_device_register() 3. request_codec_module() This way at the hdac driver probe all parameters will be set in all cases. Link: https://github.com/thesofproject/linux/issues/4731 Fixes: a0575b4a ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com Signed-off-by:
-
Venkata Prasad Potturu authored
Some platforms doesn't have reference mclk pin to codec, so set bclk as a clk source for rt5682s codec pll in tdm mode. Signed-off-by:
Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com Signed-off-by:
-
Venkata Prasad Potturu authored
Some platforms doesn't have reference mclk pin to codec, so set bclk as a clk source for rt5682s codec pll in tdm mode. Signed-off-by:
-
Venkata Prasad Potturu authored
Enable dpcm_capture for amplifier codec MAX98388 for reference stream capture in smart amplifier case. Signed-off-by:
-
Venkata Prasad Potturu authored
Add i2s bt support for sof-nau8821-max sound card. Signed-off-by:
-
Venkata Prasad Potturu authored
Add sof_bt cpu id and create dailink for i2s bt instance in acp common machine driver. Signed-off-by:
-
Venkata Prasad Potturu authored
Remove extra dmi_product_family entry in amd config entry table. Signed-off-by:
-
Venkata Prasad Potturu authored
Add condition check for acp config flag to load legacy driver only. Signed-off-by:
-
Venkata Prasad Potturu authored
Add sys_vendor and product_name dmi entries for acp5x platform. Signed-off-by:
-
- Dec 06, 2023
-
-
Fabio Estevam authored
Unlike i.MX8MP, i.MX93 has two XCVR interrupts. Describe the two interrupts for the i.MX93 to fix the following dt-schema warning: imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml# Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.com Signed-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Header alignment with firmware, addition of new token and partial match filters.
-
