- Mar 30, 2023
-
-
Gregory Greenman authored
Split iwl_mvm_sta into general and link specific parts. As a first step, all link dependent parameters reside in deflink. The change was done mostly using the spatch below with some manual adjustments. @iwl_mvm_sta@ struct iwl_mvm_sta *s; identifier var = {sta_id, lq_sta, avg_energy}; @@ ( s-> - var + deflink.var ) Signed-off-by:Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.34eace06d583.I1f8c5e919a71b21030460fbdd220d42401b688b1@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Gregory Greenman authored
In MLO, some fields of iwl_mvm_vif should be defined in the context of a link. Define a separate structure for these fields and add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy code will use only deflink object while MLO related code will use the corresponding link from the link array. It follows the strategy applied in mac80211 for introducing MLO changes. The below spatch takes care of updating all driver code to access fields separated into MLD specific data structure via deflink (need to convert all references to the fields listed in var to deflink.var and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field). @iwl_mld_vif@ struct iwl_mvm_vif *v; struct ieee80211_vif *vv; identifier fn; identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta, beacon_stats, smps_requests, probe_resp_data, he_ru_2mhz_block, cab_queue, phy_ctxt, queue_params}; @@ ( v-> - var + deflink.var | fn(vv)-> - var + deflink.var ) Signed-off-by: -
Kieran Frewen authored
Include S1G capabilities in netlink band info messages. Signed-off-by:
Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by:
Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by:
-
Kieran Frewen authored
Add the missing S1G capabilities information element to probe requests. Signed-off-by:
-
Tom Rix authored
clang with W=1 reports net/mac80211/rc80211_minstrel_ht.c:1711:6: error: variable 'n_supported' set but not used [-Werror,-Wunused-but-set-variable] int n_supported = 0; ^ This variable is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230325132610.1334820-1-trix@redhat.com Signed-off-by:
-
Nathan Chancellor authored
There is a 64-bit division in iwl_mvm_get_crosstimestamp_fw(), which results in a link failure when building 32-bit architectures with clang: ld.lld: error: undefined symbol: __udivdi3 >>> referenced by ptp.c >>> drivers/net/wireless/intel/iwlwifi/mvm/ptp.o:(iwl_mvm_phc_get_crosstimestamp) in archive vmlinux.a GCC has optimizations for division by a constant that clang does not implement, so this issue is not visible when building with GCC. Use the 64-bit division helper div_u64(), which takes a u64 dividend and u32 divisor, which matches this situation and prevents the emission of a libcall for the division. Fixes: 21fb8da6 ("wifi: iwlwifi: mvm: read synced time from firmware if supported") Reported-by:
Arnd Bergmann <arnd@arndb.de> Link: https://github.com/ClangBuiltLinux/linux/issues/1826 Reported-by:
"kernelci.org bot" <bot@kernelci.org> Link: https://lore.kernel.org/6423173a.620a0220.3d5cc.6358@mx.google.com/ Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
- Mar 24, 2023
-
-
Jaewan Kim authored
PMSR (a.k.a. peer measurement) is generalized measurement between two devices with Wi-Fi support. And currently FTM (a.k.a. fine time measurement or flight time measurement) is the one and only measurement. Add the necessary functionality to allow mac80211_hwsim to report PMSR result. The result would come from the wmediumd, where other Wi-Fi devices' information are kept. mac80211_hwsim only need to deliver the result to the userspace. In detail, add new mac80211_hwsim attributes HWSIM_CMD_REPORT_PMSR, and HWSIM_ATTR_PMSR_RESULT. When mac80211_hwsim receives the PMSR result with command HWSIM_CMD_REPORT_PMSR and detail with attribute HWSIM_ATTR_PMSR_RESULT, received data is parsed to cfg80211_pmsr_result and resent to the userspace by cfg80211_pmsr_report(). To help receive the details of PMSR result, hwsim_rate_info_attributes is added to receive rate_info without complex bitrate calculation. (i.e. send rate_info without adding inverse of nl80211_put_sta_rate()). Signed-off-by:
Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230322131637.2633968-6-jaewan@google.com [fix uninitialized return value when there are no reports] Signed-off-by:
-
Jaewan Kim authored
PMSR (a.k.a. peer measurement) is generalized measurement between two devices with Wi-Fi support. And currently FTM (a.k.a. fine time measurement or flight time measurement) is the one and only measurement. Add necessary functionalities for mac80211_hwsim to abort previous PMSR request. The abortion request is sent to the wmedium where the PMSR request is actually handled. In detail, add new mac80211_hwsim command HWSIM_CMD_ABORT_PMSR. When mac80211_hwsim receives the PMSR abortion request via ieee80211_ops.abort_pmsr, the received cfg80211_pmsr_request is resent to the wmediumd with command HWSIM_CMD_ABORT_PMSR and attribute HWSIM_ATTR_PMSR_REQUEST. The attribute is formatted as the same way as nl80211_pmsr_start() expects. Signed-off-by:
-
Jaewan Kim authored
PMSR (a.k.a. peer measurement) is generalized measurement between two Wi-Fi devices. And currently FTM (a.k.a. fine time measurement or flight time measurement) is the one and only measurement. FTM is measured by RTT (a.k.a. round trip time) of packets between two Wi-Fi devices. Add necessary functionalities for mac80211_hwsim to start PMSR request by passthrough the request to wmediumd via virtio. mac80211_hwsim can't measure RTT for real because mac80211_hwsim the software simulator and packets are sent almost immediately for real. This change expect wmediumd to have all the location information of devices, so passthrough requests to wmediumd. In detail, add new mac80211_hwsim command HWSIM_CMD_ABORT_PMSR. When mac80211_hwsim receives the PMSR start request via ieee80211_ops.start_pmsr, the received cfg80211_pmsr_request is resent to the wmediumd with command HWSIM_CMD_START_PMSR and attribute HWSIM_ATTR_PMSR_REQUEST. The attribute is formatted as the same way as nl80211_pmsr_start() expects. Signed-off-by:
-
Jaewan Kim authored
Expose nl80211_send_chandef functionality for mac80211_hwsim or vendor netlink can use it where needed. Signed-off-by:
Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230322131637.2633968-3-jaewan@google.com Signed-off-by:
-
Jaewan Kim authored
PMSR (a.k.a. peer measurement) is generalized measurement between two Wi-Fi devices. And currently FTM (a.k.a. fine time measurement or flight time measurement) is the one and only measurement. FTM is measured by RTT (a.k.a. round trip time) of packets between two Wi-Fi devices. Add necessary functionality to allow mac80211_hwsim to be configured with PMSR capability. The capability is mandatory to accept incoming PMSR request because nl80211_pmsr_start() ignores incoming the request without the PMSR capability. In detail, add new mac80211_hwsim attribute HWSIM_ATTR_PMSR_SUPPORT. HWSIM_ATTR_PMSR_SUPPORT is used to set PMSR capability when creating a new radio. To send extra capability details, HWSIM_ATTR_PMSR_SUPPORT can have nested PMSR capability attributes defined in the nl80211.h. Data format is the same as cfg80211_pmsr_capabilities. If HWSIM_ATTR_PMSR_SUPPORT is specified, mac80211_hwsim builds cfg80211_pmsr_capabilities and sets wiphy.pmsr_capa. Signed-off-by:
-
Aloka Dixit authored
Generate EMA beacons, each including MBSSID and RNR elements at a given index. If number of stored RNR elements is more than the number of MBSSID elements then add those in every EMA beacon. Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230323113801.6903-3-quic_alokad@quicinc.com Signed-off-by:
-
Aloka Dixit authored
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by:
-
Bagas Sanjaya authored
Commit fe4a6d2d ("wifi: mac80211: implement support for yet another mesh A-MSDU format") expands amsdu_mesh_control list to multi-line list. However, the expansion triggers Sphinx warning: Documentation/driver-api/80211/mac80211-advanced:214: ./net/mac80211/sta_info.h:628: WARNING: Unexpected indentation. Use bullet list instead to fix the warning. Link: https://lore.kernel.org/linux-next/20230323141548.659479ef@canb.auug.org.au/ Fixes: fe4a6d2d ("wifi: mac80211: implement support for yet another mesh A-MSDU format") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by:
-
Gregory Greenman authored
Check sta pointer for NULL and don't crash if it is. Fixes: 006c152a ("wifi: iwlwifi: mvm: add support for the new STA related commands") Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/linux-wireless/20230314194113.132873ce015c.I7b12a77e5be066730762e6ceeeaa7190293c3df1@changeid/ Signed-off-by:
-
- Mar 22, 2023
-
-
Aloka Dixit authored
Add support enhanced multi-BSS advertisements (EMA) for profile periodicity up to 3 beacons. Signed-off-by:
-
Aloka Dixit authored
Advertise multiple BSSID support for up to 8 interfaces. Do not send beacons from the non-transmitting interfaces. Signed-off-by:
-
Aloka Dixit authored
Move the beacon transmission to a separate function to facilitate addition of EMA beacon transmission. Signed-off-by:
-
Aloka Dixit authored
Add APIs to generate an array of beacons for an EMA AP (enhanced multiple BSSID advertisements), each including a single MBSSID element. EMA profile periodicity equals the count of elements. - ieee80211_beacon_get_template_ema_list() - Generate and return all EMA beacon templates. Drivers must call ieee80211_beacon_free_ema_list() to free the memory. No change in the prototype for the existing API, ieee80211_beacon_get_template(), which should be used for non-EMA AP. - ieee80211_beacon_get_template_ema_index() - Generate a beacon which includes the multiple BSSID element at the given index. Drivers can use this function in a loop until NULL is returned which indicates end of available MBSSID elements. - ieee80211_beacon_free_ema_list() - free the memory allocated for the list of EMA beacon templates. Modify existing functions ieee80211_beacon_get_ap(), ieee80211_get_mbssid_beacon_len() and ieee80211_beacon_add_mbssid() to accept a new parameter for EMA index. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
Manikanta Pubbisetty authored
Currently when NL80211_SCAN_FLAG_COLOCATED_6GHZ is set in the scan flags, in addition to the co-located APs, PSC channels in the 6 GHz band would also be scanned if the user space has asked for it. In other words, the scan would happen on PSC channels & co-located 6 GHz channels that were reported in the RNR IE. Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag to reflect the above said behavior. Signed-off-by:
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Link: https://lore.kernel.org/r/20230308104556.9399-1-quic_mpubbise@quicinc.com Signed-off-by:
-
Felix Fietkau authored
MT7996 hardware supports mesh A-MSDU subframes in hardware, but uses a big-endian length field Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20230314095956.62085-7-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
This helps bring down rx CPU usage by avoiding calls to the rx handlers in the slow path. Supports forwarding and local rx, including A-MSDU. Signed-off-by:
-
Felix Fietkau authored
Significantly reduces mesh forwarding path CPU usage and enables the direct use of iTXQ. Signed-off-by:
-
Felix Fietkau authored
Previously, fast xmit only worked on interface types where initially a sta lookup is performed, and a cached header can be attached to the sta, requiring only some fields to be updated at runtime. This technique is not directly applicable for a mesh device type due to the dynamic nature of the topology and protocol. There are more addresses that need to be filled, and there is an extra header with a dynamic length based on the addressing mode. Change the code to cache entries contain a copy of the mesh subframe header + bridge tunnel header, as well as an embedded struct ieee80211_fast_tx, which contains the information for building the 802.11 header. Add a mesh specific early fast xmit call, which looks up a cached entry and adds only the mesh subframe header, before passing it over to the generic fast xmit code. To ensure the changes in network are reflected in these cached headers, flush affected cached entries on path changes, as well as other conditions that currently trigger a fast xmit check in other modes (key changes etc.) This code is loosely based on a previous implementation by: Sriram R <quic_srirrama@quicinc.com> Cc: Sriram R <quic_srirrama@quicinc.com> Signed-off-by:
-
Felix Fietkau authored
Since the sequence number is shared across different tx queues, it needs to be atomic in order to avoid accidental duplicate assignment Signed-off-by:
-
Felix Fietkau authored
On newer MediaTek SoCs (e.g. MT7986), WLAN->WLAN or WLAN->Ethernet flows can be offloaded by the SoC. In order to support that, the .ndo_setup_tc op is needed. Signed-off-by:
-
Abhishek Naik authored
Add debugfs file in mvm to retrieve TAS status per LMAC, TAS block list, current mcc, OEM name and OEM allowed list. Signed-off-by:
Abhishek Naik <abhishek.naik@intel.com> Signed-off-by:
-
Avraham Stern authored
Instead of enabling HW timestamping by default every time a station is connected, disable it by default and enable it only upon request for a specific station. HW timestamping can be enabled for only one peer at a time. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Mukesh Sisodiya authored
Add missing rf support for spacific rf for BnJ device Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Miri Korenblit authored
As we have a new MLD STA cmd, there will be a different function to add/remove a station in MLD mode. But both functions will share a common part. Put this part in a separate function which will be used later in adding/removing a sta in MLD mode. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Miri Korenblit authored
In iwl_mvm_add_sta() we're initializing the new allocated mvm_sta. We are setting some fields to zero even though it was allocated with kzalloc, for the case of HW restart. But in such a case we will never get to this initializations due to the goto statement that we have in this case. Remove these initializations. Signed-off-by:
-
Miri Korenblit authored
We have a new STA cmd as part of the new MLD API. There are some parts of sending the STA cmd which are common to both the old and the new one. Put this parts in functions which will later be used to send the new STA cmd. Signed-off-by:
-
Miri Korenblit authored
As the new MLD API is introduced, we have a new enumeration for the different station types. Since struct iwl_mvm_sta's sta_type field will be in use for both new and old API, change its type to a unified one, so it can hold both. Signed-off-by:
-
Miri Korenblit authored
This function sends the STA_HE_CTXT_CMD, which won't be used in the new MLD API. Instead, a part of the fields of this command will be in the new STA cmd. Put the parts that are common to both commands in functions, which will later be used in sending the new STA cmd. Signed-off-by:
-
Miri Korenblit authored
We used to send a MAC CTXT cmd to ask the FW to not pass MCAST frames if we're associated but not authorized, because we don't have the keys in that stage, and after authorization - we sent the cmd again to ask the FW to pass MCAST, as we have the keys now. The patch linked below was changing this strategy to always allow MCAST frames, and if we're not authorized - the driver will drop them. But we're still sending the MAC CTXT cmd after deaouthorization even though we don't tell the FW to not pass MCAST frames anymore. Basically we don't tell the FW anything new with this cmd. Fix this by not sending MAC CTXT command after deauthorization. For authorization we're sending the cmd to configure other changes too, so keep it. Signed-off-by:
-
Miri Korenblit authored
This is another patch in the series adding all the ops for the new MLD ieee80211_ops. The callbacks added here use the new MLD FW API Signed-off-by:
-
Miri Korenblit authored
This is another patch in the series adding all the ops for the new MLD ieee80211_ops. The callbacks added here use the new MLD FW API Signed-off-by:
-
Avraham Stern authored
iwl_mvm_get_sync_time() reads the gp2 from the device and then reads the system clock. Since the two reads are not done atomically, unexpected delays may happen between the two reads (e.g. context switch) which make it inaccurate. In order to improve the accuracy of the cross timestamp, call iwl_mvm_get_sync_time() multiple times in a loop and take the result in which the difference between the two clock is the smallest. Signed-off-by:
-
Avraham Stern authored
Implement the following PHC operations: 1. adjtime - for adding an offset to the PHC clock time. 2. adjfine - for adjusting the PHC clock frequency. 3. gettime64 - for getting the PHC clock time. This function returns the time as adjusted by adjtime and adjfine. The adjusted time will also be used for time sync frames timestamping. Signed-off-by:
-
Johannes Berg authored
Check hardware/firmware support and enable TX beacon protection as well if supported, programming the key into the firmware as usual. Signed-off-by:
-
