- Jun 12, 2019
-
-
Guennadi Liakhovetski authored
Response tag only occupies 6 bits, not 7. This bug is harmless, since the value has just been shifted to the right by 26 bits, so this is only a cosmetic fix. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Jun 11, 2019
-
-
Takashi Sakamoto authored
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both direction have no differences. This commit unifies the pairs. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
After bus reset, isochronous resource manager releases all of allocated isochronous resources. The nodes to transfer isochronous packet should request reallocation of the resources. However, between the bus-reset and invocation of 'struct fw_driver.update' handler, ALSA PCM application can detect this situation by XRUN because the target device cancelled to transmit packets once bus-reset occurs. Due to the above mechanism, ALSA fireface driver just stops packet streaming in the update handler, thus pcm.prepare handler should request the reallocation. This commit requests the reallocation in pcm.prepare callback when bus generation is changed. Signed-off-by:
-
Takashi Sakamoto authored
Once allocated, isochronous resources are available for packet streaming, even if the streaming is cancelled. For this reason, current implementation handles allocation of the resources and starting packet streaming at the same time. However, this brings complicated procedure to start packet streaming. This commit separates the allocation and starting. The allocation is done in pcm.hw_params callback and available till pcm.hw_free callback. Even if any XRUN occurs, pcm.prepare callback is done to restart packet streaming without releasing/allocating the resources. There are two points to stop packet streaming; in pcm.hw_params and pcm.prepare callbacks. The former point is a case that packet streaming is already started for any MIDI substream then packet streaming is requested with different sampling transfer frequency for any PCM substream. The latter point is cases of any XRUN or packet queueing error. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. This commit adds a helper function to allocate isochronous resources, separated from operations to start packet streaming, I note that some dice-based devices have two pair of endpoints for isochronous packet straeming. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. There're three points to finish packet streaming but no helper functions for common operations for it. This commit adds a helper function for operations to finish packet streaming. Signed-off-by:
-
Takashi Sakamoto authored
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both direction have no differences. This commit unifies the pairs. Signed-off-by:
-
Takashi Sakamoto authored
After bus reset, isochronous resource manager releases all of allocated isochronous resources. The nodes to transfer isochronous packet should request reallocation of the resources. However, between the bus-reset and invocation of 'struct fw_driver.update' handler, ALSA PCM application can detect this situation by XRUN because the target device cancelled to transmit packets once bus-reset occurs. Due to the above mechanism, ALSA fireface driver just stops packet streaming in the update handler, thus pcm.prepare handler should request the reallocation. This commit requests the reallocation in pcm.prepare callback when bus generation is changed. Signed-off-by:
-
Takashi Sakamoto authored
Once allocated, isochronous resources are available for packet streaming, even if the streaming is cancelled. For this reason, current implementation handles allocation of the resources and starting packet streaming at the same time. However, this brings complicated procedure to start packet streaming. This commit separates the allocation and starting. The allocation is done in pcm.hw_params callback and available till pcm.hw_free callback. Even if any XRUN occurs, pcm.prepare callback is done to restart packet streaming without releasing/allocating the resources. There are two points to stop packet streaming; in pcm.hw_params and pcm.prepare callbacks. The former point is a case that packet streaming is already started for any MIDI substream then packet streaming is requested with different sampling transfer frequency for any PCM substream. The latter point is cases of any XRUN or packet queueing error. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. All of models in Digidesign Digi00x family have the same formation of data channels in isochronous packet for both directions. This commit simplifies allocation of isochronous resources in this point. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. The caller of begin_session() calls finish_session() in its error path, thus no need to call finish_session() in error path of begin_session(). This commit simplifies error path of begin_session(). Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. The operation to finish packet streaming corresponds to stopping isochronous contexts. This commit applies code refactoring to move codes to stop into a helper function to finish the session. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous resources in pcm.hw_params/hw_free callbacks. The registration of isochronous channels is done just after allocation of isochronous resources. This commit separates the registration just before starting packet streaming. Signed-off-by:
-
Stefan Sauer authored
The Emagic Unitor 8 does not provide iManufacturer and iProduct fields in its device descriptor. These fields are used by alsa to make build the device name. Thus uncomment the .product-name in the quirks-table. Without this change the device shows up as 'USB Device 0x86a:0x01'. Output of lsusb and amidi: https://gist.github.com/ensonic/7820a102e91f31575be355da2b6b33bc Signed-off-by:
Stefan Sauer <ensonic@google.com> Signed-off-by:
-
Takashi Sakamoto authored
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both direction have no differences. This commit unifies the pairs. Signed-off-by:
-
Takashi Sakamoto authored
The operation to finish packet streaming corresponds to stopping isochronous contexts. This commit applies code refactoring to move codes to stop into a helper function to finish the session. Signed-off-by:
-
Takashi Sakamoto authored
After bus reset, isochronous resource manager releases all of allocated isochronous resources. The nodes to restart packet streaming should request reallocation of the resources. However, between the bus-reset and invocation of 'struct fw_driver.update' handler, ALSA PCM application can detect this situation by XRUN because the target device cancelled to transmit packets once bus-reset occurs. Due to the above mechanism, ALSA fireface driver just stops packet streaming in the update handler, thus pcm.prepare handler should request the reallocation. This commit requests the reallocation in pcm.prepare callback when bus generation is changed. Signed-off-by:
-
Takashi Sakamoto authored
Once allocated, isochronous resources are available for packet streaming, even if the streaming is cancelled. For this reason, current implementation handles allocation of the resources and starting packet streaming at the same time. However, this brings complicated procedure to start packet streaming. This commit separates the allocation and starting. The allocation is done in pcm.hw_params callback and available till pcm.hw_free callback. Even if any XRUN occurs, pcm.prepare callback is done to restart packet streaming for allocated the resources. There are two points to stop packet streaming; in pcm.hw_params and pcm.prepare callbacks. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. This commit implements allocate_resources callback for the protocol specific to latter models. The encoded values of constant table is split into several condition statements to separate the operation to configure sampling transfer frequency from the operation to configure the number of data channels in rx packet. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. This commit implements allocate_resources callback for ff400 protocol. In this callback, sampling transfer frequency is configured to the device as well. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. This commit implements allocate_resources callback for ff800 protocol. As I noted in commit fc716397 ("ALSA: fireface: add support for packet streaming on Fireface 800"), this unit allocates isochronous resources for tx stream voluntarily. Therefore, this commit is to maintain isochronous rsources for rx stream. In the callback, sampling transfer frequency is configured to the device as well. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. In ALSA fireface driver, the allocation of isochronous resources is programmed in each implementation of protocol. This commit adds protocol-specific operation for the allocation separated from the operation to begin session. Signed-off-by:
-
Takashi Sakamoto authored
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both direction have no differences. This commit unifies the pairs. Signed-off-by:
-
Takashi Sakamoto authored
The operation to finish packet streaming corresponds to stopping isochronous contexts. This commit applies code refactoring to move codes to stop into a helper function to finish the session. Signed-off-by:
-
Takashi Sakamoto authored
After bus reset, isochronous resource manager releases all of allocated isochronous resources. The nodes to restart packet streaming should request reallocation of the resources. However, between the bus-reset and invocation of 'struct fw_driver.update' handler, ALSA PCM application can detect this situation by XRUN because the target device cancelled to transmit packets once bus-reset occurs. Due to the above mechanism, ALSA firewire-tascam driver just stops packet streaming in the update handler, thus pcm.prepare handler should request the reallocation. This commit requests the reallocation in pcm.prepare callback when bus generation is changed. Signed-off-by:
-
Takashi Sakamoto authored
Once allocated, isochronous resources are available for packet streaming, even if the streaming is cancelled. For this reason, current implementation handles allocation of the resources and starting packet streaming at the same time. However, this brings complicated procedure to start packet streaming. This commit separates the allocation and starting. The allocation is done in pcm.hw_params callback and available till pcm.hw_free callback. Even if any XRUN occurs, pcm.prepare callback is done to restart packet streaming for allocated the resources. There are two points to stop packet streaming; in pcm.hw_params and pcm.prepare callbacks. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. This commit obsoletes a helper function to release isochronous resources for both direction. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. This commit applies minor code refactoring for a helper function to allocate isochronous resources. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a part of preparation to perform allocation/release of isochronous channels in pcm.hw_params/hw_free callbacks. The registration of isochronous channels is done just after allocation of isochronous resources. This commit separates the registration just before starting packet streaming. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: sound/pci/lx6464es/lx_core.c: In function 'lx_interrupt_handle_async_events': sound/pci/lx6464es/lx_core.c:990:6: warning: variable 'urun_mask' set but not used [-Wunused-but-set-variable] sound/pci/lx6464es/lx_core.c:989:6: warning: variable 'orun_mask' set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- May 31, 2019
-
-
Takashi Iwai authored
For code simplification and safety, use struct_size() macro for calculating the dsp_image_seg object size. Signed-off-by: -
Takashi Iwai authored
For code simplification and safety, use struct_size() macro for calculating the hda_conn_list object size with the variable array. Signed-off-by: -
Takashi Iwai authored
For code simplification and safety, use struct_size() macro for calculating the snd_kcontrol object size with the variable array. Signed-off-by:
-
- May 30, 2019
-
-
Takashi Iwai authored
A follow-up fix for the HD-audio previous polling mode changes. Signed-off-by: -
Bard Liao authored
The patch is to fix commit 5e13cf6c (ALSA: hda: add polling mode in snd_hdac_bus_get_response) spin_lock_irq should be called before snd_hdac_bus_update_rirb. Fixes: 5e13cf6c ("ALSA: hda: add polling mode in snd_hdac_bus_get_response") Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
- May 28, 2019
-
-
Takashi Iwai authored
Pull LINE6 driver cleanups and fixes. Signed-off-by: -
Takashi Iwai authored
... instead of unconditional cast. Signed-off-by: -
Takashi Iwai authored
Now all timer usages in line6 drivers are gone, we can get rid of some helper macro and function that became superfluous. Signed-off-by: -
Takashi Iwai authored
Variax driver had a very complex and staged startup sequence using multiple timers and a work. This patch simplifies the procedure to a single delayed work. Now the startup stage consists of: - VARIAX_STARTUP_VERSIONREQ: requesting the version and the message handler raises up to the next stage upon receiving the reply. The request is repeated until a reply arrives. - VARIAX_STARTUP_ACTIVATE: does activation, and queue for the next stage. - VARIAX_STARTUP_SETUP: registers the card. Signed-off-by: -
Takashi Iwai authored
POD HD driver had a complex staged startup sequence with both timer and work. This patch simplifies it to a single delayed work with a single stage. Signed-off-by:
-
