- Jun 18, 2021
-
-
Sean Christopherson authored
Drop the explicit check on EPTP switching being enabled. The EPTP switching check is handled in the generic VMFUNC function check, while the underlying VMFUNC enablement check is done by hardware and redone by generic VMFUNC emulation. The vmcs12 EPT check is handled by KVM at VM-Enter in the form of a consistency check, keep it but add a WARN. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210609234235.1244004-16-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
WARN and inject #UD when emulating VMFUNC for L2 if the function is out-of-bounds or if VMFUNC is not enabled in vmcs12. Neither condition should occur in practice, as the CPU is supposed to prioritize the #UD over VM-Exit for out-of-bounds input and KVM is supposed to enable VMFUNC in vmcs02 if and only if it's enabled in vmcs12, but neither of those dependencies is obvious. Signed-off-by:
-
Sean Christopherson authored
Remove the @reset_roots param from kvm_init_mmu(), the one user, kvm_mmu_reset_context() has already unloaded the MMU and thus freed and invalidated all roots. This also happens to be why the reset_roots=true paths doesn't leak roots; they're already invalid. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Defer the MMU sync on PCID invalidation so that multiple sync requests in a single VM-Exit are batched. This is a very minor optimization as checking for unsync'd children is quite cheap. Signed-off-by:
-
Sean Christopherson authored
Use __kvm_mmu_new_pgd() via kvm_init_shadow_ept_mmu() to emulate VMFUNC[EPTP_SWITCH] instead of nuking all MMUs. EPTP_SWITCH is the EPT equivalent of MOV to CR3, i.e. is a perfect fit for the common PGD flow, the only hiccup being that A/D enabling is buried in the EPTP. But, that is easily handled by bouncing through kvm_init_shadow_ept_mmu(). Explicitly request a guest TLB flush if VPID is disabled. Per Intel's SDM, if VPID is disabled, "an EPTP-switching VMFUNC invalidates combined mappings associated with VPID 0000H (for all PCIDs and for all EP4TA values, where EP4TA is the value of bits 51:12 of EPTP)". Note, this technically is a very bizarre bug fix of sorts if L2 is using PAE paging, as avoiding the full MMU reload also avoids incorrectly reloading the PDPTEs, which the SDM explicitly states are not touched: If PAE paging is in use, an EPTP-switching VMFUNC does not load the four page-directory-pointer-table entries (PDPTEs) from the guest-physical address in CR3. The logical processor continues to use the four guest-physical addresses already present in the PDPTEs. The guest-physical address in CR3 is not translated through the new EPT paging structures (until some operation that would load the PDPTEs). In addition to optimizing L2's MMU shenanigans, avoiding the full reload also optimizes L1's MMU as KVM_REQ_MMU_RELOAD wipes out all roots in both root_mmu and guest_mmu. Signed-off-by:
-
Sean Christopherson authored
Use KVM_REQ_TLB_FLUSH_GUEST instead of KVM_REQ_MMU_RELOAD when emulating INVPCID of all contexts. In the current code, this is a glorified nop as TLB_FLUSH_GUEST becomes kvm_mmu_unload(), same as MMU_RELOAD, when TDP is disabled, which is the only time INVPCID is only intercepted+emulated. In the future, reusing TLB_FLUSH_GUEST will simplify optimizing paths that emulate a guest TLB flush, e.g. by synchronizing as needed instead of completely unloading all MMUs. Signed-off-by:
-
Sean Christopherson authored
When emulating INVVPID for L1, free only L2+ roots, using the guest_mode tag in the MMU role to identify L2+ roots. From L1's perspective, its own TLB entries use VPID=0, and INVVPID is not requied to invalidate such entries. Per Intel's SDM, INVVPID _may_ invalidate entries with VPID=0, but it is not required to do so. Cc: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by:
-
Sean Christopherson authored
Drop the dedicated nested_vmx_transition_mmu_sync() now that the MMU sync is handled via KVM_REQ_TLB_FLUSH_GUEST, and fold that flush into the all-encompassing nested_vmx_transition_tlb_flush(). Opportunistically add a comment explaning why nested EPT never needs to sync the MMU on VM-Enter. Signed-off-by:
-
Sean Christopherson authored
Drop skip_mmu_sync and skip_tlb_flush from __kvm_mmu_new_pgd() now that all call sites unconditionally skip both the sync and flush. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Introduce nested_svm_transition_tlb_flush() and use it force an MMU sync and TLB flush on nSVM VM-Enter and VM-Exit instead of sneaking the logic into the __kvm_mmu_new_pgd() call sites. Add a partial todo list to document issues that need to be addressed before the unconditional sync and flush can be modified to look more like nVMX's logic. In addition to making nSVM's forced flushing more overt (guess who keeps losing track of it), the new helper brings further convergence between nSVM and nVMX, and also sets the stage for dropping the "skip" params from __kvm_mmu_new_pgd(). Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Stop leveraging the MMU sync and TLB flush requested by the fast PGD switch helper now that kvm_set_cr3() manually handles the necessary sync, frees, and TLB flush. This will allow dropping the params from the fast PGD helpers since nested SVM is now the odd blob out. Signed-off-by:
-
Sean Christopherson authored
Flush and sync all PGDs for the current/target PCID on MOV CR3 with a TLB flush, i.e. without PCID_NOFLUSH set. Paraphrasing Intel's SDM regarding the behavior of MOV to CR3: - If CR4.PCIDE = 0, invalidates all TLB entries associated with PCID 000H and all entries in all paging-structure caches associated with PCID 000H. - If CR4.PCIDE = 1 and NOFLUSH=0, invalidates all TLB entries associated with the PCID specified in bits 11:0, and all entries in all paging-structure caches associated with that PCID. It is not required to invalidate entries in the TLBs and paging-structure caches that are associated with other PCIDs. - If CR4.PCIDE=1 and NOFLUSH=1, is not required to invalidate any TLB entries or entries in paging-structure caches. Extract and reuse the logic for INVPCID(single) which is effectively the same flow and works even if CR4.PCIDE=0, as the current PCID will be '0' in that case, thus honoring the requirement of flushing PCID=0. Continue passing skip_tlb_flush to kvm_mmu_new_pgd() even though it _should_ be redundant; the clean up will be done in a future patch. The overhead of an unnecessary nop sync is minimal (especially compared to the actual sync), and the TLB flush is handled via request. Avoiding the the negligible overhead is not worth the risk of breaking kernels that backport the fix. Fixes: 956bf353 ("kvm: x86: Skip shadow page resync on CR3 switch when indicated by guest") Cc: Junaid Shahid <junaids@google.com> Signed-off-by: -
Sean Christopherson authored
Drop bogus logic that incorrectly clobbers the accessed/dirty enabling status of the nested MMU on an EPTP switch. When nested EPT is enabled, walk_mmu points at L2's _legacy_ page tables, not L1's EPT for L2. This is likely a benign bug, as mmu->ept_ad is never consumed (since the MMU is not a nested EPT MMU), and stuffing mmu_role.base.ad_disabled will never propagate into future shadow pages since the nested MMU isn't used to map anything, just to walk L2's page tables. Note, KVM also does a full MMU reload, i.e. the guest_mmu will be recreated using the new EPTP, and thus any change in A/D enabling will be properly recognized in the relevant MMU. Fixes: 41ab9372 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor") Signed-off-by:
-
Sean Christopherson authored
Use BIT_ULL() instead of an open-coded shift to check whether or not a function is enabled in L1's VMFUNC bitmap. This is a benign bug as KVM supports only bit 0, and will fail VM-Enter if any other bits are set, i.e. bits 63:32 are guaranteed to be zero. Note, "function" is bounded by hardware as VMFUNC will #UD before taking a VM-Exit if the function is greater than 63. Before: if ((vmcs12->vm_function_control & (1 << function)) == 0) 0x000000000001a916 <+118>: mov $0x1,%eax 0x000000000001a91b <+123>: shl %cl,%eax 0x000000000001a91d <+125>: cltq 0x000000000001a91f <+127>: and 0x128(%rbx),%rax After: if (!(vmcs12->vm_function_control & BIT_ULL(function & 63))) 0x000000000001a955 <+117>: mov 0x128(%rbx),%rdx 0x000000000001a95c <+124>: bt %rax,%rdx Fixes: 27c42a1b ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor") Signed-off-by:
-
Sean Christopherson authored
Trigger a full TLB flush on behalf of the guest on nested VM-Enter and VM-Exit when VPID is disabled for L2. kvm_mmu_new_pgd() syncs only the current PGD, which can theoretically leave stale, unsync'd entries in a previous guest PGD, which could be consumed if L2 is allowed to load CR3 with PCID_NOFLUSH=1. Rename KVM_REQ_HV_TLB_FLUSH to KVM_REQ_TLB_FLUSH_GUEST so that it can be utilized for its obvious purpose of emulating a guest TLB flush. Note, there is no change the actual TLB flush executed by KVM, even though the fast PGD switch uses KVM_REQ_TLB_FLUSH_CURRENT. When VPID is disabled for L2, vpid02 is guaranteed to be '0', and thus nested_get_vpid02() will return the VPID that is shared by L1 and L2. Generate the request outside of kvm_mmu_new_pgd(), as getting the common helper to correctly identify which requested is needed is quite painful. E.g. using KVM_REQ_TLB_FLUSH_GUEST when nested EPT is in play is wrong as a TLB flush from the L1 kernel's perspective does not invalidate EPT mappings. And, by using KVM_REQ_TLB_FLUSH_GUEST, nVMX can do future simplification by moving the logic into nested_vmx_transition_tlb_flush(). Fixes: 41fab65e ("KVM: nVMX: Skip MMU sync on nested VMX transition when possible") Signed-off-by:
-
Vitaly Kuznetsov authored
Do KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE for a freshly restored VM (before the first KVM_RUN) to check that KVM_STATE_NESTED_EVMCS is not lost. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
VMCS12 is used to keep the authoritative state during nested state migration. In case 'need_vmcs12_to_shadow_sync' flag is set, we're in between L2->L1 vmexit and L1 guest run when actual sync to enlightened (or shadow) VMCS happens. Nested state, however, has no flag for 'need_vmcs12_to_shadow_sync' so vmx_set_nested_state()-> set_current_vmptr() always sets it. Enlightened vmptrld path, however, doesn't have the quirk so some VMCS12 changes may not get properly reflected to eVMCS and L1 will see an incorrect state. Note, during L2 execution or when need_vmcs12_to_shadow_sync is not set the change is effectively a nop: in the former case all changes will get reflected during the first L2->L1 vmexit and in the later case VMCS12 and eVMCS are already in sync (thanks to copy_enlightened_to_vmcs12() in vmx_get_nested_state()). Reviewed-by:
-
Vitaly Kuznetsov authored
When nested state migration happens during L1's execution, it is incorrect to modify eVMCS as it is L1 who 'owns' it at the moment. At least genuine Hyper-V seems to not be very happy when 'clean fields' data changes underneath it. 'Clean fields' data is used in KVM twice: by copy_enlightened_to_vmcs12() and prepare_vmcs02_rare() so we can reset it from prepare_vmcs02() instead. While at it, update a comment stating why exactly we need to reset 'hv_clean_fields' data from L0. Signed-off-by:
-
Vitaly Kuznetsov authored
'need_vmcs12_to_shadow_sync' is used for both shadow and enlightened VMCS sync when we exit to L1. The comment in nested_vmx_failValid() validly states why shadow vmcs sync can be omitted but this doesn't apply to enlightened VMCS as it 'shadows' all VMCS12 fields. Reviewed-by:
-
Vitaly Kuznetsov authored
'Clean fields' data from enlightened VMCS is only valid upon vmentry: L1 hypervisor is not obliged to keep it up-to-date while it is mangling L2's state, KVM_GET_NESTED_STATE request may come at a wrong moment when actual eVMCS changes are unsynchronized with 'hv_clean_fields'. As upon migration VMCS12 is used as a source of ultimate truth, we must make sure we pick all the changes to eVMCS and thus 'clean fields' data must be ignored. Signed-off-by:
-
Vitaly Kuznetsov authored
Unlike VMREAD/VMWRITE/VMPTRLD, VMCLEAR is a valid instruction when enlightened VMCS is in use. TLFS has the following brief description: "The L1 hypervisor can execute a VMCLEAR instruction to transition an enlightened VMCS from the active to the non-active state". Normally, this change can be ignored as unmapping active eVMCS can be postponed until the next VMLAUNCH instruction but in case nested state is migrated with KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE, keeping eVMCS mapped may result in its synchronization with VMCS12 and this is incorrect: L1 hypervisor is free to reuse inactive eVMCS memory for something else. Inactive eVMCS after VMCLEAR can just be unmapped. Reviewed-by:
-
Vitaly Kuznetsov authored
Unlike regular set_current_vmptr(), nested_vmx_handle_enlightened_vmptrld() can not be called directly from vmx_set_nested_state() as KVM may not have all the information yet (e.g. HV_X64_MSR_VP_ASSIST_PAGE MSR may not be restored yet). Enlightened VMCS is mapped later while getting nested state pages. In the meantime, vmx->nested.hv_evmcs_vmptr remains 'EVMPTR_INVALID' and it's indistinguishable from 'evmcs is not in use' case. This leads to certain issues, in particular, if KVM_GET_NESTED_STATE is called right after KVM_SET_NESTED_STATE, KVM_STATE_NESTED_EVMCS flag in the resulting state will be unset (and such state will later fail to load). Introduce 'EVMPTR_MAP_PENDING' state to detect not-yet-mapped eVMCS after restore. With this, the 'is_guest_mode(vcpu)' hack in vmx_has_valid_vmcs12() is no longer needed. Signed-off-by:
-
Vitaly Kuznetsov authored
copy_vmcs12_to_enlightened()/copy_enlightened_to_vmcs12() don't return any result, make them return 'void'. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
In theory, L1 can try to disable enlightened VMENTRY in VP assist page and try to issue VMLAUNCH/VMRESUME. While nested_vmx_handle_enlightened_vmptrld() properly handles this as 'EVMPTRLD_DISABLED', previously mapped eVMCS remains mapped and thus all evmptr_is_valid() checks will still pass and nested_vmx_run() will proceed when it shouldn't. Release eVMCS immediately when we detect that enlightened vmentry was disabled by L1. Signed-off-by:
-
Vitaly Kuznetsov authored
'dirty_vmcs12' is only checked in prepare_vmcs02_early()/prepare_vmcs02() and both checks look like: 'vmx->nested.dirty_vmcs12 || evmptr_is_valid(vmx->nested.hv_evmcs_vmptr)' so for eVMCS case the flag changes nothing. Drop the assignment to avoid the confusion. No functional change intended. Reported-by:
-
Vitaly Kuznetsov authored
Instead of checking 'vmx->nested.hv_evmcs' use '-1' in 'vmx->nested.hv_evmcs_vmptr' to indicate 'evmcs is not in use' state. This matches how we check 'vmx->nested.current_vmptr'. Introduce EVMPTR_INVALID and evmptr_is_valid() and use it instead of raw '-1' check as a preparation to adding other 'special' values. No functional change intended. Suggested-by:
-
Maxim Levitsky authored
if new KVM_*_SREGS2 ioctls are used, the PDPTRs are a part of the migration state and are correctly restored by those ioctls. Signed-off-by:
-
Maxim Levitsky authored
This is a new version of KVM_GET_SREGS / KVM_SET_SREGS. It has the following changes: * Has flags for future extensions * Has vcpu's PDPTRs, allowing to save/restore them on migration. * Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS) New capability, KVM_CAP_SREGS2 is added to signal the userspace of this ioctl. Signed-off-by:
-
Maxim Levitsky authored
Small refactoring that will be used in the next patch. Signed-off-by:
-
Maxim Levitsky authored
Similar to the rest of guest page accesses after a migration, this access should be delayed to KVM_REQ_GET_NESTED_STATE_PAGES. Signed-off-by:
-
Maxim Levitsky authored
Document the actual reason why we need to do it on migration and move the call to svm_set_nested_state to be closer to VMX code. To avoid loading the PDPTRs from possibly not up to date memory map, in nested_svm_load_cr3 after the move, move this code to .get_nested_state_pages. Signed-off-by:
-
Sean Christopherson authored
Kill off pdptrs_changed() and instead go through the full kvm_set_cr3() for PAE guest, even if the new CR3 is the same as the current CR3. For VMX, and SVM with NPT enabled, the PDPTRs are unconditionally marked as unavailable after VM-Exit, i.e. the optimization is dead code except for SVM without NPT. In the unlikely scenario that anyone cares about SVM without NPT _and_ a PAE guest, they've got bigger problems if their guest is loading the same CR3 so frequently that the performance of kvm_set_cr3() is notable, especially since KVM's fast PGD switching means reloading the same CR3 does not require a full rebuild. Given that PAE and PCID are mutually exclusive, i.e. a sync and flush are guaranteed in any case, the actual benefits of the pdptrs_changed() optimization are marginal at best. Signed-off-by:
-
Sean Christopherson authored
Remove the "PDPTRs unchanged" check to skip PDPTR loading during nested SVM transitions as it's not at all an optimization. Reading guest memory to get the PDPTRs isn't magically cheaper by doing it in pdptrs_changed(), and if the PDPTRs did change, KVM will end up doing the read twice. Signed-off-by:
-
Sean Christopherson authored
Remove the pdptrs_changed() check when loading L2's CR3. The set of available registers is always reset when switching VMCSes (see commit e5d03de5 , "KVM: nVMX: Reset register cache (available and dirty masks) on VMCS switch"), thus the "are PDPTRs available" check will always fail. And even if it didn't fail, reading guest memory to check the PDPTRs is just as expensive as reading guest memory to load 'em. Signed-off-by:
-
Vitaly Kuznetsov authored
The initial implementation of the test only tests that access to Hyper-V MSRs and hypercalls is in compliance with guest visible CPUID feature bits. Signed-off-by:
-
Vitaly Kuznetsov authored
evmcs.h is x86_64 only thing, move it to x86_64/ subdirectory. Signed-off-by:
-
Vitaly Kuznetsov authored
These defines can be shared by multiple tests, move them to a dedicated header. Signed-off-by:
-
Vitaly Kuznetsov authored
Hypercalls which use extended processor masks are only available when HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED privilege bit is exposed (and 'RECOMMENDED' is rather a misnomer). Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V partition must possess 'HV_X64_CLUSTER_IPI_RECOMMENDED' privilege ('recommended' is rather a misnomer) to issue HVCALL_SEND_IPI hypercalls. Signed-off-by: -
Vitaly Kuznetsov authored
Hyper-V partition must possess 'HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED' privilege ('recommended' is rather a misnomer) to issue HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST/SPACE hypercalls. Signed-off-by:
-
