- May 26, 2015
-
-
Christoph Hellwig authored
T10 PI is just another optional feature, LLDDs should work without the infrastructure. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
- May 25, 2015
-
-
John Soni Jose authored
Bump the driver version [jejb: resolve conflict with 4627de93 MAINTAINERS, be2iscsi: change email domain] Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
John Soni Jose authored
Once be2iscsi driver is loaded and operational close Boot session established by FW. Signed-off-by:
-
John Soni Jose authored
Check DMA memory before it is unmapped. Signed-off-by:
-
John Soni Jose authored
Driver was not freeing the DMA memory allocated for EQ/CQ in the unload path. This patch frees the DMA memory during the driver unload. Signed-off-by:
-
John Soni Jose authored
Reserve device PCI I/O and Memory resources. Signed-off-by:
-
John Soni Jose authored
Increment the retry count to get the boot target info when port async event is received by the driver. Update sysfs enteries with the boot target parameters. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Christoph Hellwig authored
Swap the whole 32 bits we read from the hardware instead of swapping just the 16bits we care about in place later. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
The fusion HBAs don't really use the instance template like the other variants, as it branches off at a much higher level. So instead of trying to squeeze megasas_fire_cmd_fusion into the wrong calling convention call it locally with argument data types that match what is passed. [jejb: fix up 32 bit compile failure] Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Converting structure fields in place is always a bad idea, and in this case by moving it into the only caller we also only have to do a single byte swap as most fields of this structure are never used. Signed-off-by:
-
Christoph Hellwig authored
Add noop conversions for all ones to make sparse happy. Signed-off-by:
-
Christoph Hellwig authored
This adds endianness annotations to all data structures, and a few variables directly referencing them. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
kbuild test robot authored
drivers/scsi/megaraid/megaraid_sas_base.c:1701:6: sparse: symbol 'megasas_complete_outstanding_ioctls' was not declared. Should it be static? From: Christoph Hellwig <hch@lst.de> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will add support for Single Server High Availability(SSHA) cluster support. Here is the short decsription of changes done to add support for SSHA- 1) Host will send system's Unique ID based on DMI_PRODUCT_UUID to firmware. 2) Toggle the devhandle in LDIO path for Remote LDs. Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will upgrade the driver version and add back the release date and sysfs hook for the same. Some internal applications uses sysfs parameter for release date, so they were broken because of removal of release date from sysfs. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d98 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will add separate function for refiring MFI commands in Fusion adapters's OCR code. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will create separate functions for- 1) setting up IRQs for MSI-x interrupts 2) setting up IRQs for legacy interrupts 3) freeing up IRQs. and enable interrupts after adapter's initialization. The reason behind initialising adapter earlier is: by that time firmware is operational and can send interrupts, so better to use interrupt based interface to send internal DCMD to firmware instead of using polling method, since MFI frames' pool size is reduced and polling method does not free up MFI frame for fusion adapters, so sending more DCMDs with polled method may cause MFI frames's pool go out of frames and end up failing DCMD. Signed-off-by:
-
Dan Carpenter authored
We should return -ENOMEM if kzalloc() fails here instead of returning success. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Stephen Boyd authored
This device only exists on platforms under ARCH_QCOM, not ARCH_MSM. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Reviewed-by:
Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by:
-
kbuild test robot authored
Signed-off-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Signed-off-by:
-
Karen Xie authored
set the initial sequence number so the 1st byte of payload is aligned on the 8-byte boundary. Signed-off-by:
Karen Xie <kxie@chelsio.com> Reviewed-by:
-
Karen Xie authored
Change driver version to follow the same format as other Chelsio drivers. Added missing release date back to cxgb4i and version string back to libcxgbi. Signed-off-by:
-
Karen Xie authored
Signed-off-by:
-
Karen Xie authored
For adapters supporting both 10G and 40G use per-connection send/recv window and calculate the size based on the link speed. Signed-off-by:
-
Dan Carpenter authored
If device_add() fails then it should return the error code but instead the current code returns success. Signed-off-by:
-
James Bottomley authored
Currently we blindly use the value of cmd_per_lun as the initial setting for queue_depth. This fails miserably (hangs the system) if it is zero, which is the default value for anything uninitialised in the template. The net result is that every host template has to set a value for cmd_per_lun. Instead, use a default value of 1 if the actual value is unset. This should pave the way for removing cmd_per_lun from all the templates and eventually from SCSI itself. Signed-off-by:
-
- May 19, 2015
-
-
James Smart authored
The old email addresses will go away very soon. Revising with new addresses. Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
Minh Tran authored
be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by:
Minh Tran <minh.tran@avagotech.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Signed-off-by:
-
Mark Hounschell authored
256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
-
- May 12, 2015
-
-
Alexey Kardashevskiy authored
This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel. Without this, the kernel enters an infinite oops loop. This is the hardware used for verification: 0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) 0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
K. Y. Srinivasan authored
Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@vger.kernel.org> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
- Apr 28, 2015
-
-
Christoph Hellwig authored
The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
