- Dec 03, 2010
-
-
Johannes Berg authored
Create a new chapter about SMPS in the driver API part of the mac80211 book and populate it with the existing docs. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Add some existing documentation about station handling to a new chapter about advanced APIs. Signed-off-by:
-
Johannes Berg authored
Publish the documentation for the interface iteration functions in the right section of the book. Signed-off-by:
-
Johannes Berg authored
Include the aggregation documentation in the docbook, split up by public and internal docs. Signed-off-by:
-
Johannes Berg authored
Add an API chapter to the rate control part of the mac80211 book and populate it with some existing documentation. Signed-off-by:
-
Johannes Berg authored
There isn't a clear TX documentation yet, so put these into the misc section for now. Signed-off-by:
-
Johannes Berg authored
Put them along with their "regular" versions for now, we should write more docs in the future. Signed-off-by:
-
Johannes Berg authored
Create a new chapter for the mac80211 workqueue that contains the documentation written for it. Signed-off-by:
-
Johannes Berg authored
Just include them in the list of functions, there aren't any more detailed docs (yet). Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Joe Perches authored
Invert test and return early. Move variable declarations to local scope. Don't initialize variables to 0 unnecessarily. Signed-off-by:
-
Ben Greear authored
This fixes debugfs problems when a phy is renamed, and is able to remove a bit of code that is no longer needed. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Specs were updated plus we become wl compatible. Signed-off-by:
-
Hauke Mehrtens authored
Make it possible to read out the attributes, till now only show on dmesg, through sysfs. This patch was some time in OpenWrt. Signed-off-by:
Bernhard Loos <bernhardloos@googlemail.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
- Dec 01, 2010
-
-
Stanislaw Gruszka authored
Commit dbbf1755 "iwlwifi: use antenna information in EEPROM" caused 4965 device breakage with "Microcode SW error detected. Restarting 0x82000000." message. This patch reverts 4965 part of that commit. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Helmut Schaa authored
Remove a superfluous ieee80211_is_data check as that was checked a few lines before already and we wont't get here for non-data frames at all. Second, the frame was already converted to 802.3 header format and reading the fc and addr1 fields was only possible because the 802.3 header is short enough and didn't overwrite the relevant parts of the 802.11 header. Make the code more obvious by checking the ethernet header's h_dest field. Furthermore reorder the conditions to reduce the number of checks when dynamic powersave is not needed (AP mode for example). Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Reviewed-by:
-
Johannes Stezenbach authored
All rt2x00 drivers except rt2800pci call ieee80211_tx_status() from a workqueue, which causes "NOHZ: local_softirq_pending 08" messages. To fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni() which can be called from process context, and call it from rt2x00lib_txdone(). For the rt2800pci special case a driver flag is introduced. Signed-off-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
-
Nick Kossifidis authored
* A diff between rfbuffer settings of turbo and non-turbo modes indicates there is a bit on bank 2 related to turbo operation (it's set on turbo modes). This bit is present on all radios except RF5413 that seems to have a completely different bank 2. Also since 2317 has the same rf-registers locations with 2425 and since the bit exists on 2317 I assume it also exists on 2425/2417). So in case we use turbo mode (40MHz) enable it on bank modification. Signed-off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Nick Kossifidis authored
* Clean up what's left of turbo mode, since we handle all register modifications (rfbuffer comes next) on code there is no need to have duplicated arrays. * Rename change_channel to skip_pcu on initvals.c as we did on reset.c Signed-off-by:
Nick Kossifidis <micklfemm@gmail.com> Signed-off-by:
-
Nick Kossifidis authored
* Clean up CHANNEL_T(URBO), use AR5K_BWMODE_40MHZ instead Signed-off-by:
-
Nick Kossifidis authored
* Use correct clock value when setting OFDM timings on non-default bwmodes. Signed-off-by:
-
Nick Kossifidis authored
* Don't return -EINVAL when trying to set tx power on RF5110 because AR5210 reset will fail. We need to add support for RF5110 and AR5210 eeprom in the future but for now just skip it. Signed-off-by:
-
Nick Kossifidis authored
* Tweak phy activation -> rx delay for different bwmodes Signed-off-by:
-
Nick Kossifidis authored
* Since we set antenna flags on phy init and ack bitrate mode on pcu init, there is no need to save/restore sta_id flags on ath5k_hw_reset. Also we don't need to re-set our mac address because it's not affected by resets. Signed-off-by:
-
Nick Kossifidis authored
* Add synth-only channel change for AR2413/5413. When we call ath5k_reset with a channel ath5k_hw_reset will first try to set channel on PHY while PHY is running instead of doing a normal full reset. To do this phy_init has to change to implement this functionality. * Clean up change_channel flag, what it really did was skip PCU registers when setting initvals. This is done because on reset PCU registers are not affected (except the registers we set in pcu init and -due to hw problems- TSF). Use a new skip_pcu flag that's not misleading instead. In the future we might use that to also skip PCU reset and save us the TSF etc problems (needs testing because standard practice is to reset everything). * Use fast channel change only when setting channel, and set skip_pcu to false only on init. When we reset the card due to DMA or PHY problems skip pcu but never do a fast channel change. Signed-off-by:
-
Nick Kossifidis authored
* Only set power table if we are changing channel/mode there is no need to recalculate and reset the power table all the time. Signed-off-by:
-
Nick Kossifidis authored
* Set correct PLL settings for each bwmode Signed-off-by:
-
Nick Kossifidis authored
* Add spur mitigation filter support for half/quarter and turbo. Signed-off-by:
-
Nick Kossifidis authored
* Tweak power detector delays on AR5111/AR5112 when using half/quarter modes. Signed-off-by:
-
Nick Kossifidis authored
* Make sure we always set IFS timings even if no coverage class is set. If we don't we'll miss the needed changes for different bwmodes. Signed-off-by:
-
Nick Kossifidis authored
* Set AR5K_DCU_GBL_IFS_MISC_TURBO_MODE flag on DCU when operating on 40MHz Signed-off-by:
-
Nick Kossifidis authored
* Replace set_slot_time with set_ifs_intervals that also sets the various inter-frame space intervals based on current bwmode. * Clean up AR5210 mess from reset_tx_queue, AR5210 only has one data queue and we set IFS intervals for that queue on set_ifs_intervals so there is nothing left to do for 5210 on reset_tx_queue. Signed-off-by:
-
