- Mar 18, 2021
-
-
Jani Nikula authored
Add intel_bios_encoder_data pointer to encoder, and use it for hdmi and dp iboost. For starters, we only set the encoder->devdata for DDI encoders, i.e. we can only use it for data that is used by DDI encoders. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4bc49244ce68e136e5b21db4c4e6554bec9ac0fb.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Stop caching the information in ddi_port_info. We're phasing out ddi_port_info usage completely, and prefer using the VBT child device information directly using the provided helpers. v2: - Remove supports_typec_usb & supports_tbt from ddi_vbt_port_info (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Start using struct intel_bios_encoder_data directly. We'll start sanitizing the child device data directly as well, instead of the cached data in ddi_port_info[]. The one downside here is having to store a non-const pointer back to intel_bios_encoder_data. Eventually we'll be able to have a direct pointer from encoder to intel_bios_encoder_data, removing the need to go through the ddi_port_info[] array altogether. And we'll be able to remove all the cached data in ddi_port_info[]. v2: - Remove supports_dp and supports_edp from ddi_port_info too - Add devdata != NULL check in intel_bios_is_port_edp() Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1 Signed-off-by:
-
Jani Nikula authored
We'll be needing the intel_bios_encoder_data pointer going forward, and it's just easier to store the higher level pointer in the ddi_vbt_port_info[] array. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
These will be exposed to the rest of the driver and replace other functions. Everything will operate on the child devices. v2: - Rebased, removed stray blank line - Also abstracted intel_bios_encoder_supports_crt (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
We'll be needing it in the future. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Make the naming suitable for exposing to the rest of the driver as an opaque type. No functional changes. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Instead of initialing data directly in ddi_port_info array, create fake child devices for default outputs when the VBT is missing. This makes further unification of output handling easier. This will make intel_bios_is_port_present() return true for the fake child devices. This may cause subtle changes in a handful of places. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
There are two main cases where the default outputs are useful when the VBT is missing: - There are some DDI-platform Chromebooks out there that do not have a VBT, which worked by coincidence because of the default outputs. The machines need to continue to work. - Early platform enabling when the VBT might not be available. (This could be circumvented by using the i915.vbt_firmware parameter.) Prepare for generating fake child devices for the default outputs by limiting the number of outputs. We don't want to generate excessive amounts of fake child devices. This could be perhaps be limited even more in the future, but match what's possible on all DDI platforms. Note that limiting the defaults to non-TypeC ports in commit 828ccb31 ("drm/i915/icl: Add TypeC ports only if VBT is present") is a more strict limit, and makes this a no-op on recent platforms. v2: Rewrote commit message Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Pre-DDI and non-CHV aren't using the information created here anyway, so don't bother setting the defaults for them. This should be a non-functional change, but is separated here to catch any regressions in a single commit. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Unify the code paths at the higher level. Reviewed-by:
-
Jani Nikula authored
Reduce indent with an early return. No functional changes. Reviewed-by:
-
Jani Nikula authored
We'll be needing the version in more places in the future, so avoid the need to pass it around. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by:
-
Jani Nikula authored
Time to just yank out the bandage. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by:
-
Jani Nikula authored
It's the adls_revid_step_tbl array indexes that matter. Reviewed-by:
-
- Mar 16, 2021
-
-
https://github.com/intel/gvt-linuxJani Nikula authored
gvt-next-2021-03-16 - Parse accurate vGPU virtual display rate (Colin) - Convert vblank timer as per-vGPU based on current rate (Colin) - spelling fix (Bhaskar) Signed-off-by:
-
- Mar 15, 2021
-
-
Sean Paul authored
One instance of DRM_DEBUG_KMS was leftover in dp_link_training, convert it to the new shiny. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Sean Paul authored
This patch adds some newlines which are missing from debug messages. This will prevent logs from being stacked up in dmesg. Signed-off-by:
-
Umesh Nerlige Ramappa authored
SAMPLE_OA parameter enables sampling of OA buffer and results in a call to init the OA buffer which initializes the OA unit head/tail pointers. The OA_EXPONENT parameter controls the periodicity of the OA reports in the OA buffer and results in starting a hrtimer. Before gen12, all use cases required the use of the OA buffer and i915 enforced this setting when vetting out the parameters passed. In these platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked fine since it was implied that SAMPLE_OA is always passed. With gen12, this changed. Users can use perf without enabling the OA buffer as in OAR use cases. While an OAR use case should ideally not start the hrtimer, we see that passing an OA_EXPONENT parameter will start the hrtimer even though SAMPLE_OA is not specified. This results in an uninitialized OA buffer, so the head/tail pointers used to track the buffer are zero. This itself does not fail, but if we ran a use-case that SAMPLED the OA buffer previously, then the OA_TAIL register is still pointing to an old value. When the timer callback runs, it ends up calculating a wrong/large number of available reports. Since we do a spinlock_irq_save and start processing a large number of reports, NMI watchdog fires and causes a crash. Start the timer only if SAMPLE_OA is specified. v2: - Drop SAMPLE OA check when appending samples (Ashutosh) - Prevent read if OA buffer is not being sampled Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL") Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
-
- Mar 13, 2021
-
-
Ville Syrjälä authored
Rename a bunch of the skl+ watermark struct members to have sensible names. Avoids me having to think what plane_res_b/etc. means. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Make the code more typo proof by extracting small helpers that do the "do we have enough DDB for the WM level?" checks in a consistent manner. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Let's make all the "do we have enough DDB for this WM level?" checks use min_ddb_alloc. To achieve that we need to populate this for the transition watermarks as well. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
For non-transition watermarks we are supposed to check min_ddb_alloc rather than plane_res_b when determining if we have enough DDB space for it. A bit too much copy pasta made me check the wrong thing. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: df4a50a3 ("drm/i915: Zero out SAGV wm when we don't have enough DDB for it") Signed-off-by:
-
Ville Syrjälä authored
Say we have two planes enabled with watermarks configured as follows: plane A: wm0=enabled/can_sagv=false, wm1=enabled/can_sagv=true plane B: wm0=enabled/can_sagv=true, wm1=disabled This is possible since the latency we use to calculate can_sagv may not be the same for both planes due to skl_needs_memory_bw_wa(). In this case skl_crtc_can_enable_sagv() will see that both planes have enabled at least one watermark level with can_sagv==true, and thus proceeds to allow SAGV. However, since plane B does not have wm1 enabled plane A can't actually use it either. Thus we are now running with SAGV enabled, but plane A can't actually tolerate the extra latency it imposes. To remedy this only allow SAGV on if the highest common enabled watermark level for all active planes can tolerate the extra SAGV latency. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
On HSW/BDW with VT-d active the first tile row scanned out after the first async flip of the frame often ends up corrupted. Whether the corruption happens or not depends on the scanline on which the async flip happens, but the behaviour seems very consistent. Ie. the same set of scanlines (which are most scanlines) always show the corruption. And another set of scanlines (far less of them) never shows the corruption. I discovered that disabling the fetch-stride stretching feature cures the corruption. This is some kind of TLB related prefetch thing AFAIK. We already disable it on SNB primary planes due to a documented workaround. The hardware folks indicated that disabling this should be fine, so let's go with that. And while we're here, let's document the relevant bits on all pre-skl platforms. Fixes: 2a636e24 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f1 ("drm/i915: Implement async flips for bdw") Signed-off-by:
Karthik B S <karthik.b.s@intel.com>
-
- Mar 12, 2021
-
-
Ville Syrjälä authored
Let's check that we actually found the PLL before doing the port_clock readout, just in case the hardware was severly misprogrammed by the previous guy. Not sure the hw would even survive such misprogramming without hanging but no real harm in checking anyway. Cc: Karthik B S <karthik.b.s@intel.com> Signed-off-by:
-
- Mar 11, 2021
-
-
Jani Nikula authored
Sync up with upstream. Signed-off-by:
-
- Mar 09, 2021
-
-
Ville Syrjälä authored
Now that all the encoder clock stuff is uniformly abstracted for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping() to cover all of them. Not sure there is a particular benefit in doing so, but less special cases always makes me happy. Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
Support reading out the current state of the DDI clock. Not sure we really want this. Seems a bit excessive just to restore the debug print to icl_sanitize_encoder_pll_mapping()? But maybe there's more use for it? Signed-off-by:
-
Ville Syrjälä authored
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook. There it neatly sits next to the matching .{enable,disable}_clock() functions. In order to avoid excessive boilerplate I changed the behaviour such that all platforms now do the readout via crtc_state->port_dpll[]. ICL+ TC is still a bit special due to TBTPLL not having a functional .get_freq(). Should probably change that by adopting the LCPLL approach, but that would require a fairly substantial rework of the DPLL ID handling. So leave it for later. Signed-off-by: -
Ville Syrjälä authored
All the other places we have use pipes instead of crtc indices when tracking resource usage. Life is easier when we do it the same way always, so switch the dpll mgr to using pipes as well. Looks like it was actually mixing these up in some cases so it would not even have worked correctly except when the device has a contiguous set of pipes starting from pipe A. Granted, that is the typical case but supposedly it may not always hold on modern hw. Signed-off-by:
-
Ville Syrjälä authored
The clock readout for DDI encoders needs to moved into the encoders. To that end intel_dpll_readout_hw_state() needs to happen after the encoder readout as otherwise it can't correctly populate the PLL crtc_mask/active_mask bitmasks. v2: Populate DPLL ref clocks before the encoder->get_config() Signed-off-by:
-
Ville Syrjälä authored
Stop assuming intel_ddi_get_config() is all we need from the primary encoder, and instead call it via the .get_config() vfunc. This will allow customized .get_config() for the primary, which I plan to use to handle the differences in the clock readout between various platforms. Signed-off-by:
-
- Mar 06, 2021
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use" -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit of a mix between fallout from the worker change, cleanups and reductions now possible from that change, and fixes in general. In detail: - Fully serialize manager and worker creation, fixing races due to that. - Clean up some naming that had gone stale. - SQPOLL fixes. - Fix race condition around task_work rework that went into this merge window. - Implement unshare. Used for when the original task does unshare(2) or setuid/seteuid and friends, drops the original workers and forks new ones. - Drop the only remaining piece of state shuffling we had left, which was cred. Move it into issue instead, and we can drop all of that code too. - Kill f_op->flush() usage. That was such a nasty hack that we had out of necessity, we no longer need it. - Following from ->flush() removal, we can also drop various bits of ctx state related to SQPOLL and cancelations. - Fix an issue with IOPOLL retry, which originally was fallout from a filemap change (removing iov_iter_revert()), but uncovered an issue with iovec re-import too late. - Fix an issue with system suspend. - Use xchg() for fallback work, instead of cmpxchg(). - Properly destroy io-wq on exec. - Add create_io_thread() core helper, and use that in io-wq and io_uring. This allows us to remove various silly completion events related to thread setup. - A few error handling fixes. This should be the grunt of fixes necessary for the new workers, next week should be quieter. We've got a pending series from Pavel on cancelations, and how tasks and rings are indexed. Outside of that, should just be minor fixes. Even with these fixes, we're still killing a net ~80 lines" * tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits) io_uring: don't restrict issue_flags for io_openat io_uring: make SQPOLL thread parking saner io-wq: kill hashed waitqueue before manager exits io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return io_uring: don't keep looping for more events if we can't flush overflow io_uring: move to using create_io_thread() kernel: provide create_io_thread() helper io_uring: reliably cancel linked timeouts io_uring: cancel-match based on flags io-wq: ensure all pending work is canceled on exit io_uring: ensure that threads freeze on suspend io_uring: remove extra in_idle wake up io_uring: inline __io_queue_async_work() io_uring: inline io_req_clean_work() io_uring: choose right tctx->io_wq for try cancel io_uring: fix -EAGAIN retry with IOPOLL io-wq: fix error path leak of buffered write hash map io_uring: remove sqo_task io_uring: kill sqo_dead and sqo submission halting io_uring: ignore double poll add on the same waitqueue head ...
-
