- Feb 09, 2017
-
-
Florian Westphal authored
Alternative is to keep it an make the (unused) afinfo arg const to avoid the compiler warnings once the afinfo structs get constified. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Florian Westphal authored
Only needed it to register the policy backend at init time. Signed-off-by:
-
Florian Westphal authored
Just call xfrm_garbage_collect_deferred() directly. This gets rid of a write to afinfo in register/unregister and allows to constify afinfo later on. Signed-off-by:
-
Florian Westphal authored
Nothing checks the return value. Also, the errors returned on unregister are impossible (we only support INET and INET6, so no way xfrm_policy_afinfo[afinfo->family] can be anything other than 'afinfo' itself). Signed-off-by:
-
Florian Westphal authored
The comment makes it look like get_tos() is used to validate something, but it turns out the comment was about xfrm_find_bundle() which got removed years ago. xfrm_get_tos will return either the tos (ipv4) or 0 (ipv6). Signed-off-by:
-
Florian Westphal authored
Nothing writes to these structures (the module owner was not used). While at it, size xfrm_input_afinfo[] by the highest existing xfrm family (INET6), not AF_MAX. Signed-off-by:
-
- Feb 07, 2017
-
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: improve cache utilization This is the first set which begins to deal with the bad bridge cache access patterns. The first patch rearranges the bridge and port structs a little so the frequently (and closely) accessed members are in the same cache line. The second patch then moves the garbage collection to a workqueue trying to improve system responsiveness under load (many fdbs) and more importantly removes the need to check if the matched entry is expired in __br_fdb_get which was a major source of false-sharing. The third patch is a preparation for the final one which If properly configured, i.e. ports bound to CPUs (thus updating "updated" locally) then the bridge's HitM goes from 100% to 0%, but even without binding we get a win because previously every lookup that iterated over the hash chain caused false-sharing due to the first cache line being used for both mac/vid and used/updated fields. Some results from tests I've run: (note that these were run in good conditions for the baseline, everything ran on a single NUMA node and there were only 3 fdbs) 1. baseline 100% Load HitM on the fdbs (between everyone who has done lookups and hit one of the 3 hash chains of the communicating src/dst fdbs) Overall 5.06% Load HitM for the bridge, first place in the list 2. patched & ports bound to CPUs 0% Local load HitM, bridge is not even in the c2c report list Also there's 3% consistent improvement in netperf tests. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Writing once per jiffy is enough to limit the bridge's false sharing. After this change the bridge doesn't show up in the local load HitM stats. Suggested-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Fdb's used and updated fields are written to on every packet forward and packet receive respectively. Thus if we are receiving packets from a particular fdb, they'll cause false-sharing with everyone who has looked it up (even if it didn't match, since mac/vid share cache line!). The "used" field is even worse since it is updated on every packet forward to that fdb, thus the standard config where X ports use a single gateway results in 100% fdb false-sharing. Note that this patch does not prevent the last scenario, but it makes it better for other bridge participants which are not using that fdb (and are only doing lookups over it). The point is with this move we make sure that only communicating parties get the false-sharing, in a later patch we'll show how to avoid that too. Signed-off-by:
-
Nikolay Aleksandrov authored
Move the fdb garbage collector to a workqueue which fires at least 10 milliseconds apart and cleans chain by chain allowing for other tasks to run in the meantime. When having thousands of fdbs the system is much more responsive. Most importantly remove the need to check if the matched entry has expired in __br_fdb_get that causes false-sharing and is completely unnecessary if we cleanup entries, at worst we'll get 10ms of traffic for that entry before it gets deleted. Signed-off-by:
-
Nikolay Aleksandrov authored
Move around net_bridge so the vlan fields are in the beginning since they're checked on every packet even if vlan filtering is disabled. For the port move flags & vlan group to the beginning, so they're in the same cache line with the port's state (both flags and state are checked on each packet). Signed-off-by:
-
William Tu authored
The patch fixes the case when adding a zero value to the packet pointer. The zero value could come from src_reg equals type BPF_K or CONST_IMM. The patch fixes both, otherwise the verifer reports the following error: [...] R0=imm0,min_value=0,max_value=0 R1=pkt(id=0,off=0,r=4) R2=pkt_end R3=fp-12 R4=imm4,min_value=4,max_value=4 R5=pkt(id=0,off=4,r=4) 269: (bf) r2 = r0 // r2 becomes imm0 270: (77) r2 >>= 3 271: (bf) r4 = r1 // r4 becomes pkt ptr 272: (0f) r4 += r2 // r4 += 0 addition of negative constant to packet pointer is not allowed Signed-off-by:William Tu <u9012063@gmail.com> Signed-off-by:
Mihai Budiu <mbudiu@vmware.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Josef Bacik authored
These two tests are based on the work done for f23cc643 . The first test is just a basic one to make sure we don't allow AND'ing negative values, even if it would result in a valid index for the array. The second is a cleaned up version of the original testcase provided by Jann Horn that resulted in the commit. Acked-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: add fabric notifier When a switch fabric is composed of multiple switch chips, these chips must be programmed accordingly when an event occurred on one of them. Examples of such event include hardware bridging: when a Linux bridge spans interconnected chips, they must be programmed to allow external ports to ingress frames on their internal ports. Another example is cross-chip hardware VLANs. Switch chips in-between interconnected bridge ports must also configure a given VLAN to allow packets to pass through them. In order to support that, this patchset introduces a non-intrusive notifier mechanism. It adds a notifier head in every DSA switch tree (the said fabric), and a notifier block in every DSA switch chip. When an even occurs, it is chained to all notifiers of the fabric. Switch chips can react accordingly if they are cross-chip capable. On a dynamic debug enabled system, bridging a port in a multi-chip fabric will print something like this (ZII Rev B board): # brctl addif br0 lan3 mv88e6085 0.1:00: crosschip DSA port 1.0 bridged to br0 mv88e6085 0.4:00: crosschip DSA port 1.0 bridged to br0 # brctl delif br0 lan3 mv88e6085 0.1:00: crosschip DSA port 1.0 unbridged from br0 mv88e6085 0.4:00: crosschip DSA port 1.0 unbridged from br0 Currently only bridging events are added. A patchset introducing support for cross-chip hardware bridging configuration in mv88e6xxx will follow right after. Then events for switchdev operations are next on the line. We should note that non-switchdev events do not support rolling-back switch-wide operations. We'll have to work on closer integration with switchdev for that, like introducing new attributes or objects, to benefit from the prepare and commit phases. ==================== Signed-off-by: -
Vivien Didelot authored
A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by:
-
Vivien Didelot authored
The scope of the functions inside net/dsa/slave.c must be the slave net_device pointer. Change to state setter helper accordingly to simplify callers. Signed-off-by:
-
Vivien Didelot authored
When an error is returned during the bridging of a port in a NETDEV_CHANGEUPPER event, net/core/dev.c rolls back the operation. Be consistent and unassign dp->bridge_dev when this happens. In the meantime, add comments to document this behavior. Signed-off-by:
-
Vivien Didelot authored
Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by:
-
Vivien Didelot authored
Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by:
-
Arnd Bergmann authored
In commit abeffce9 ("net/mlx5e: Fix a -Wmaybe-uninitialized warning"), I fixed a gcc warning for the ipv4 offload handling. Now we get the same warning for the added ipv6 support: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:815:40: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] We can apply the same workaround here as well. Fixes: ce99f6b9 ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Parav Pandit authored
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Jon Maxwell <jmaxwell37@gmail.com> Acked-by:
Johannes Thumshirn <jth@kernel.org> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Dan Carpenter authored
There is a "||" vs "|" typo here so we test 0x1 instead of 0x6. Fixes: 1f8176f7 ("net/mlx4_en: Check the enabling pptx/pprx flags in SET_PORT wrapper flow") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Bert Kenward authored
Since commit 364b6055 ("net: busy-poll: return busypolling status to drivers"), napi_complete_done() returns a boolean that can be used by drivers to conditionally rearm interrupts. Testing with a 7142 shows a small latency improvement of ~100 ns. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Xin Long authored
This patch is to check if asoc->peer.prsctp_capable is set before processing fwd tsn chunk, if not, it will return an ERROR to the peer, just as rfc3758 section 3.3.1 demands. Reported-by:
Julian Cordes <julian.cordes@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: cleanup neigh handling Ido says: This series addresses long standing issues in the mlxsw driver concerning neighbour reflection. It also prepares the code for follow-up changes dealing with proper resource cleanup and nexthop reflection. The first two patches convert the neighbour reflection code to use an ordered workqueue, to prevent re-ordering of NEIGH_UPDATE events that may happen following subsequent patches. The third to fifth patches remove the ndo_neigh_{construct,destroy} entry points from the driver, thereby relying only on NEIGH_UPDATE events for neighbour reflection. This simplifies the code considerably. Last patches are fallout and adjust nits in the code I noticed while going over it. ==================== Signed-off-by: -
Ido Schimmel authored
Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
We periodically ask the neighbouring system to try and resolve neighbours that are used for nexthops, but aren't currently resolved. However, 'nud_state' is protected by the neighbour lock, so we shouldn't access it without taking it. Instead, we can simply check the 'connected' field of the neighbour entry, which we update upon NEIGH_UPDATE events. Signed-off-by:
-
Ido Schimmel authored
We only add neighbour entries that are also used for nexthops to 'nexthop_neighs_list', so when iterating over this list there's no need to check that the entry is indeed used for nexthops. Remove the redundant check. Signed-off-by:
-
Ido Schimmel authored
In commit 18bfb924 ("net: introduce default neigh_construct/destroy ndo calls for L2 upper devices") we added these ndos to stacked devices such as team and bond, so that calls will be propagated to mlxsw. However, previous commit removed the reliance on these ndos and no new users of these ndos have appeared since above mentioned commit. We can therefore safely remove this dead code. Signed-off-by:
-
Ido Schimmel authored
Up until now we had two interfaces for neighbour related configuration: ndo_neigh_{construct,destroy} and NEIGH_UPDATE netevents. The ndos were used to add and remove neighbours from the driver's cache, whereas the netevent was used to reflect the neighbours into the device's tables. However, if the NUD state of a neighbour isn't NUD_VALID or if the neighbour is dead, then there's really no reason for us to keep it inside our cache. The only exception to this rule are neighbours that are also used for nexthops, which we periodically refresh to get them resolved. We can therefore eliminate the ndo entry point into the driver and simplify the code, making it similar to the FIB reflection, which is based solely on events. This also helps us avoid a locking issue, in which the RIF cache was traversed without proper locking during insertion into the neigh entry cache. Signed-off-by: -
Ido Schimmel authored
Since commit 33b1341c ("mlxsw: spectrum_router: Fix handling of neighbour structure") we no longer use destination IP for neighbour lookup, so remove it. Signed-off-by:
-
Ido Schimmel authored
We currently associate each neighbour entry with a work item, so it's not possible to have multiple events queued for the same neighbour entry. However, this is about to be changed so that the neighbour entry is only resolved when the work item is scheduled. The above can result in a mismatch between the kernel's and the device's neighbour table, unless the associated work items are processed in the order in which they were submitted. Do that by migrating the NEIGH_UPDATE work items to be processed in the ordered workqueue which was recently introduced in mlxsw in commit a3832b31 ("mlxsw: core: Create an ordered workqueue for FIB offload"). Signed-off-by:
-
Ido Schimmel authored
We always use zero delay before queueing a work on the ordered workqueue ('mlxsw_owq'), so use work_struct directly instead of delayable work. Signed-off-by: -
David S. Miller authored
Merge tag 'linux-can-next-for-4.11-20170206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-02-06 this is a pull request of 16 patches for net-next/master. The first two patches by David Jander and me add the rx-offload framework for CAN devices to the kernel. The remaining 14 patches convert the flexcan driver to make use of it. ==================== Signed-off-by:
-
Elad Raz authored
HTGT register length is limited to 32 bytes and not 256 bytes. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
-
- Feb 06, 2017
-
-
Jingju Hou authored
The mvneta itself does not support WOL, but the PHY might. So pass the calls to the PHY Signed-off-by:
Jingju Hou <houjingj@marvell.com> Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Marc Kleine-Budde authored
This patch switches the imx6 and vf610 based SoCs from the hardware FIFO to the timestamp based rx offloading. Signed-off-by:Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The flexcan IP core has 64 mailboxes. For now they are configured for RX as a hardware FIFO. This FIFO has a fixed depth of 6 CAN frames. In some high load scenarios it turns out thas this buffer is too small. In order to have a buffer larger than the 6 frames FIFO, this patch adds support for timestamp based offloading via the generic rx-offload infrastructure. Signed-off-by: -
Marc Kleine-Budde authored
In order to receive RTR frames in the non HW FIFO mode the RSS and EACEN bits of the reg_ctrl2 have to be activated. As this has no side effect in the FIFO mode, we do this unconditionally on cores with the reg_ctrl2. Signed-off-by:
-
