- Jun 10, 2006
-
-
Ram Pai authored
This patch provides the ability to identify the export-type of each exported symbols in Module.symvers. NOTE: It updates the Module.symvers file with the additional information as shown below. 0x0f8b92af platform_device_add_resources vmlinux EXPORT_SYMBOL_GPL 0xcf7efb2a ethtool_op_set_tx_csum vmlinux EXPORT_SYMBOL Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
Avantika Mathur <mathur@us.ibm.com> Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org>
-
- Jun 09, 2006
-
-
Zach Brown authored
The binrpm-pkg target uses KERNELRELEASE when generated its .spec file. When binrpm-pkg was the first build target run in a tree it generated the .spec before kernel.release so the Version: tag in the .spec was empty. I don't know if this is the best fix, but binrpm-pkg works when we explicitly build kernel.release before descending into package-dir. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Roman Zippel authored
Signed-off-by:
-
Roman Zippel authored
If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by:
-
Randy Dunlap authored
If the beginning Kconfig file is missing, config segfaults so it might as well exit after the error message. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
This removes all the leading whitespace kconfig now warns about. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
Kconfig does its own indentation of menu prompts, so warn about and ignore leading whitespace. Remove also a few unnecessary newlines after other warning prints. Signed-off-by:
-
Roman Zippel authored
If clicking on of the links, which leads to a visible prompt, jump to it in the symbol list. Signed-off-by:
-
Roman Zippel authored
Extend the expression print helper function to allow customization of the symbol output and use it to add links to the info window. Signed-off-by:
-
Roman Zippel authored
This allows to configure every symbol list and info window separately via a popup menu, these settings are also separately saved and restored. Cleanup the ConfigSettings class a bit to reduce the number of #ifdef. Signed-off-by:
-
Roman Zippel authored
Implement a simple search request for xconfig. Currently the capabilities are rather simple (the same as menuconfig). Signed-off-by:
-
Roman Zippel authored
This makes it possible to change two options which were hardcoded sofar. 1. Any symbol can now take the role of CONFIG_MODULES 2. The more useful option is to change the list of default file names, which kconfig uses to load the base configuration if .config isn't available. Signed-off-by:
-
Roman Zippel authored
This adds the general framework to the parser to define options for config symbols with a syntax like: config FOO option bar[="arg"] Signed-off-by:
-
Roman Zippel authored
This moves the .kernelrelease file into include/config directory. Remove its generation from the config step, if the config step doesn't leave a proper .config behind, it triggers a call to silentoldconfig. Instead its generation can be done via proper dependencies. Signed-off-by:
-
Roman Zippel authored
Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by:
-
Roman Zippel authored
Extend conf_read_simple() so it can load multiple configurations. Signed-off-by:
-
Roman Zippel authored
Extend struct symbol to allow storing multiple default values, which can be used to hold multiple configurations. Signed-off-by:
-
Roman Zippel authored
The SYMBOL_{YES,MOD,NO} are not really used anymore (they were more used be the cml1 converter), so just remove them. Signed-off-by: -
Roman Zippel authored
This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by:
-
Roman Zippel authored
During loading special case the first common case (.config), be silent about it and otherwise mark it as a change that requires saving. Instead output that the file has been changed. IOW if conf does nothing (special), it's silent. Signed-off-by:
-
Sam Ravnborg authored
Ignoring references to .init.text, .exit.text from the .plt section brought the false positives down to two warnings for a defconfig build of ARCH=um on x86_64. Signed-off-by: -
Randy Dunlap authored
Add ".smp_locks" section to whitelist as being safe from init and exit sections. Signed-off-by:
-
Mike Wolf authored
The default target for most powerpc platforms is zImage. The zImage however is in arch/powerpc/boot and the mkspec script was set up to get the kernel from the top level of the kernel tree. This patch copies vmlinux to arch/powerpc/boot and then copies the kernel to the tmp directory so the rpm can be made. Signed-off-by:
Mike Wolf <mjw@us.ibm.com> Signed-off-by:
-
Pavel Roskin authored
When Makefile.host is included, $(obj-dirs) is subjected to the addprefix operation for the second time. Prefix only needs to be added to the newly added directories, but not to those that came from Makefile.lib. This causes the build system to create unneeded empty directories in the build tree when building in a separate directory. For instance, lib/lib/zlib_inflate is created in the build tree. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
- Jun 06, 2006
-
-
Linus Torvalds authored
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: fix locking and memory leak in br_add_bridge [IRDA]: Missing allocation result check in irlap_change_speed(). [PPPOE]: Missing result check in __pppoe_xmit(). [NET]: Eliminate unused /proc/sys/net/ethernet [NETCONSOLE]: Clean up initcall warning. [TCP]: Avoid skb_pull if possible when trimming head
-
Jiri Benc authored
There are several bugs in error handling in br_add_bridge: - when dev_alloc_name fails, allocated net_device is not freed - unregister_netdev is called when rtnl lock is held - free_netdev is called before netdev_run_todo has a chance to be run after unregistering net_device Signed-off-by:
Jiri Benc <jbenc@suse.cz> Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] typo: buad -> baud
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy [MMC] Add maintainers entry for MMC subsystem
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3543/1: [Fwd: PXA270 bootparams address not set] [ARM] Trivial typo fixes
-
Chad Reese authored
Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem extreme, this function does an allocate for bootmem. This would always fail since init_bootmem hasn't been called yet. Move memory_present after free_bootmem. This only marks actual memory ranges as present instead of the entire address space. Signed-off-by:Chad Reese <creese@caviumnetworks.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Fix following warnings: linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2) linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4) linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len' linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name' linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc' (original patch by Atsushi, slight changes to the setup.c part by me.) Signed-off-by:Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Atsushi Nemoto authored
Fix following warnings: linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long Signed-off-by: -
Ralf Baechle authored
RM7000 has 40-bit virtual / 36-bit physical address space. Signed-off-by: -
Ralf Baechle authored
The expressions are volatile; no need for temporary variables. Signed-off-by: -
Sergei Shtylyov authored
Fix the non-linear memory mapping done via remap_file_pages() -- it didn't work on any MIPS CPU because the page offset clashing with _PAGE_FILE and some other page protection bits which should have been left zeros for this kind of pages. Signed-off-by:Konstantin Baydarov <kbaidarov@ru.mvista.com> Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Ralf Baechle authored
The wrong revision number in the check was forcing a fallback to FPU emulation for all SB1 cores in 2.6. Signed-off-by: -
Thiemo Seufer authored
open() always sets the O_LARGEFILE flag for the o32 ABI implementation of a 64bit kernel. The appended patch fixes it. Signed-off-by:Thiemo Seufer <ths@networkno.de> Signed-off-by:
-
Sergei Shtylyov authored
Alchemy boards use YAMON which passes the environment variables as the tuples of strings (the name followed by the value) unlike PMON which passes "name=<val>" strings. Signed-off-by: -
Sergei Shtylyov authored
With 64-bit physical address enabled, 'swapon' was causing kernel oops on Alchemy CPUs (MIPS32) because of the swap entry type field corrupting the _PAGE_FILE bit in 'pte_low' field. So, switch to storing the swap entry in 'pte_high' field using all its bits except _PAGE_GLOBAL and _PAGE_VALID which gives 25 bits for the swap entry offset. Signed-off-by:
-
