Part of the undefined opcode data is updated in
gaudi2_handle_qman_err_generic() and some in
handle_lower_qman_data_on_err().
However, the 'write_enable' flag is checked only in
gaudi2_handle_qman_err_generic(), and information of more than a single
error can be mixed there.

Moreover, handle_lower_qman_data_on_err() is called only for the lower
QMAN, so for an error in the upper QMAN there is only a partial info.

Move all the data update to be done in a single place, protected by the
'write_enable' flag.
As mainly the lower QMAN's info is interesting, avoid saving the partial
info for the upper QMAN.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device debugfs directory was modified to be named as the
device-name.
This name is the parent device name, i.e. either the PCI address in case
of an ASIC, or the simulator device name in case of a simulator.

This change makes it more difficult for a user to access the debugfs
directory for a specific accel device, because he can't just use the
accel minor id, but he needs to do more device-dependent operations to
get the device name.

To make it easier to get this name, add a 'parent_device' sysfs
attribute that the user can read using the minor id before accessing
debugfs.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device debugfs directory was modified to be named as the
parent device name.
Update the paths accordingly.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

QM instructions are in multiples of 64 bits and the command type is in
the upper bits of first QWORD.
To make it clearer that an undefined command is due to a type of 0x0,
always print all 64 bits and add a zero padding if needed.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Infineon controller second stage has 3 instances that their version
need to be reported by driver.

Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The QM CQ PTR_LO/PTR_HI/TSIZE registers are for pushing a CQ entry, and
although they are updated by HW even when descriptors are fetched by PQ
and CB addresses are fed into CQ, the correct registers to use when
dumping the CQ info are the ones with the _STS suffix.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Module ID exposes the physical location of the device in the server,
from the pov of the devices in regard to how they are connected by
internal fabric.

This information is already exposed in our INFO ioctl, but there are
utilities and scripts running in data-center which are already
accessing sysfs for topology information and it is easier for them
to continue getting that information from sysfs instead of opening
a file descriptor.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Failure to map is considered a non-trivial error and we need to notify
the user about it.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Upon a QM error, the address/size from both the CQ and the ARC_CQ are
printed, although the instruction that led to the error was received
from only one of them.

Moreover, in case of a QM undefined opcode, only one of these
address/size sets will be captured based on the value of ARC_CQ_PTR.
However, this value can be non-zero even if currently the CQ is used, in
case the CQ/ARC_CQ are alternately used.

Under the assumption of having a stop-on-error configuration, modify to
use CP_STS.CUR_CQ field to get the relevant CQ for the QM error.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

hl_device_cond_reset() might be called with the hard reset flag unset,
because a compute reset upon device release as part of a graceful reset
is valid.
If the conditions for graceful reset are not met, hl_device_reset() will
be called for an immediate reset. In this case a compute reset is not
valid, so it will be replaced with a hard reset together with a debug
message about it.
This message might be confusing, as it implies that a compute reset was
requested when it shouldn't. To prevent this confusion, set the hard
reset flag in hl_device_cond_reset() if going to an immediate reset.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The print was added long back for a specific debug and can
now be removed.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

currently the undefined opcode event bit in set only for lower cp and
only if 'write_enable' is true. It should be set anyway and for all
streams in order to report that event to userspace.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Stop rescheduling another heartbeat check when EQ heartbeat check fails
as it generates confusing logs in dmesg that the heartbeat fails.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add error log when no eq event is received from FW,
to cover a scenario when FW is stuck for some reason.
In such case driver will not receive neither the eq error interrupt
or the eq heartbeat event, and will just initiate a reset without
indication in the dmesg about the reason.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When a PCIe AXI drain event happens, it is possible that the driver
cannot access the device through PCIe, and therefore cannot send a
hard-reset request to FW.
Starting from FW version 1.13, FW will initiate a hard-reset in such
a case without waiting for a reset request from the driver.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Use a predefined mask which set the device critical boot errors.
Driver will fail and stop its loading, only upon detecting at least
one of those errors defined in this mask.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When working on a bare-metal system, if FLR will happen the firmware
will handle it and driver will have no knowledge of it, and this will
cause two issues:

1.The driver will be in operational state while it should be in reset.
  This will cause the heartbeat mechanism to keep sending messages to FW
  while pci device is in reset. Eventually heartbeat will fail and
  the device will end up in non-operational state.

2. After FW handles the FLR, and due to the reset it'll go back to
   preboot stage, and driver need to perform hard reset in order to
   load the boot fit binary.

This patch will add reset_prepare hook that will set the device to
be in disabled state, so it'll be not operational, and also
reset_done hook which will be called after the actual FLR handling,
then it will perform hard reset.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

amd-drm-next-6.8-2023-12-08:

amdgpu:
- SR-IOV fixes
- DCN 3.5 updates
- Backlight fixes
- MST fixes
- DMCUB fixes
- DPIA fixes
- Display powergating updates
- Enable writeback connectors
- Misc code cleanups
- Add more register state debugging for aquavanjaram
- Suspend fix
- Clockgating fixes
- SMU 14 updates
- PSR fixes
- MES logging updates
- Misc fixes

amdkfd:
- SVM fix

radeon:
- Fix potential memory leaks in error paths

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208205613.4861-1-alexander.deucher@amd.com

Merge tag 'drm-intel-gt-next-2023-12-08' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-next

UAPI Changes:

-   drm/i915: Implement fdinfo memory stats printing

    Use the newly added drm_print_memory_stats helper to show memory
    utilisation of our objects in drm/driver specific fdinfo output.

    To collect the stats we walk the per memory regions object lists
    and accumulate object size into the respective drm_memory_stats
    categories.

Cross-subsystem Changes:

- Backmerge of drm-next (to bring drm-intel-next for PXP changes)

Driver Changes:

- Wa_18028616096 now applies to all DG2 (Matt R)
- Drop Wa_22014600077 on all DG2 (Matt R)
- Add new ATS-M device ID (Haridhar)
- More Meteorlake (MTL) workarounds (Matt R, Dnyaneshwar, Jonathan,
  Gustavo, Radhakrishna)
- PMU WARN_ON cleanup on driver unbind (Umesh)
- Limit GGTT WC flushing workaround to pre BXT/ICL platforms
- Complement implementation for Wa_16018031267 / Wa_16018063123
  (Andrzej, Jonathan, Nirmoy, Chris)

- Properly print internal GSC engine in trace logs (Tvrtko)
- Track gt pm wakerefs (Andrzej)
- Fix null deref bugs on perf code when perf is disabled (Harshit,
  Tvrtko)
- Fix __i915_request_create memory leak on driver unbind (Andrzej)
- Remove spurious unsupported HuC message on MTL (Daniele)
- Read a shadowed mmio register for ggtt flush (Vinay)
- Add missing new-line to GT_TRACE (Andrzej)
- Add drm_dbgs for critical PXP events (Alan)
- Skip pxp init if gt is wedged (Zhanjun)

- Replace custom intel runtime_pm tracker with ref_tracker library
  (Andrzej)
- Compiler warning/static checker/coding style cleanups (Arnd, Nirmoy,
  Soumya, Gilbert, Dorcas, Kunwu, Sam, Tvrtko)
- Code structure and helper cleanups (Jani, Tvrtko, Andi)
- Selftest improvements (John, Tvrtko, Andrzej)

Signed-off-by: Dave Airlie <airlied@redhat.com>

# Conflicts:
#	drivers/gpu/drm/i915/gt/intel_gt_mcr.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXNBcsSwJEVsq9On@jlahtine-mobl.ger.corp.intel.com

Merge tag 'exynos-drm-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos

 into drm-next

One bug fix
- Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM
driver.

  This function is necessary during system shutdown and when the driver
  is unbound. Without this function, components like panels may not shut
  down properly, potentially leading to power issue as mentioned in the
  kernel documentation, specially in the "driver instance overview"
  secstion of 'drm_drv.c'.

Two cleanups
- Convert '.remove()' callback function in the Exynos DRM platform
  driver to a version that returns void instead of an integer.
- Change connector type of exynos_drm_dpi.c module to DPI.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com

When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.

However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
  it after drm_kms_helper_poll_fini() since that's when other drivers
  seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
  drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
  actually need to check to see if our "drm" pointer is NULL before
  calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
  though, so that this patch can land without any dependencies. It
  could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
  bind errors to make sure that shutdown can't access freed data.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next

Two fixups
- Fix a potential error pointer dereference by checking the return value
  of exynos_drm_crtc_get_by_type() function before accessing to crtc
  object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
  by Dan[1]

[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/

Linux 6.7-rc5

Alex requested this for some amdkfd work relying on the symbols exports.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull scheduler fix from Borislav Petkov:

 - Make sure tasks are thawed exactly and only once to avoid their state
   getting corrupted

* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  freezer,sched: Do not restore saved_state of a thawed task

Pull perf event fix from Borislav Petkov:

 - Make sure perf event size validation is done on every event in the
   group

* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_validate_size()

Pull x86 fixes from Borislav Petkov:

 - Add a forgotten CPU vendor check in the AMD microcode post-loading
   callback so that the callback runs only on AMD

 - Make sure SEV-ES protocol negotiation happens only once and on the
   BSP

* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Check vendor in the AMD microcode callback
  x86/sev: Fix kernel crash due to late update to read-only ghcb_version

Pull kvm fixes from Paolo Bonzini:
 "Generic:

   - Set .owner for various KVM file_operations so that files refcount
     the KVM module until KVM is done executing _all_ code, including
     the last few instructions of kvm_put_kvm(). And then revert the
     misguided attempt to rely on "struct kvm" refcounts to pin
     KVM-the-module.

  ARM:

   - Do not redo the mapping of vLPIs, if they have already been mapped

  s390:

   - Do not leave bits behind in PTEs

   - Properly catch page invalidations that affect the prefix of a
     nested guest

  x86:

   - When checking if a _running_ vCPU is "in-kernel", i.e. running at
     CPL0, get the CPL directly instead of relying on
     preempted_in_kernel (which is valid if and only if the vCPU was
     preempted, i.e. NOT running).

   - Fix a benign "return void" that was recently introduced.

  Selftests:

   - Makefile tweak for dependency generation

   - '-Wformat' fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
  KVM: selftests: add -MP to CFLAGS
  KVM: selftests: Actually print out magic token in NX hugepages skip message
  KVM: x86: Remove 'return void' expression for 'void function'
  Revert "KVM: Prevent module exit until all VMs are freed"
  KVM: Set file_operations.owner appropriately for all such structures
  KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
  KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
  KVM: s390/mm: Properly reset no-dat
  KVM: s390: vsie: fix wrong VIR 37 when MSO is used

Pull powerpc fix from Michael Ellerman:

 - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
   hotplug while ftrace is active.

   Thanks to Naveen N Rao.

* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/ftrace: Fix stack teardown in ftrace_no_trace

Pull gpio fix from Bartosz Golaszewski:

 - fix an error path after a failed export in sysfs code

* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: sysfs: Fix error handling on failed export

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.7-rc5 to resolve some reported
  issues. Included in here are:

   - usb gadget f_hid, and uevent fix

   - xhci driver revert to resolve a much-reported issue

   - typec driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_hid: fix report descriptor allocation
  Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
  usb: typec: class: fix typec_altmode_put_partner to put plugs
  USB: gadget: core: adjust uevent timing on gadget unbind

Pull serial driver fixes from Greg KH:
 "Here are some small serial driver fixes for 6.7-rc4 to resolve some
  reported issues. Included in here are:

   - pl011 dma support fix

   - sc16is7xx driver fix

   - ma35d1 console index fix

   - 8250 driver fixes for small issues

  All of these have been in linux-next with no reported issues"

* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
  serial: ma35d1: Validate console index before assignment
  ARM: PL011: Fix DMA support
  serial: sc16is7xx: address RX timeout interrupt errata
  serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
  serial: 8250_omap: Add earlycon support for the AM654 UART controller
  serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

Pull char / misc driver fixes from Greg KH:
 "Here are some small fixes for 6.7-rc5 for a variety of small driver
  subsystems. Included in here are:

   - debugfs revert for reported issue

   - greybus revert for reported issue

   - greybus fixup for endian build warning

   - coresight driver fixes

   - nvmem driver fixes

   - devcoredump fix

   - parport new device id

   - ndtest build fix

  All of these have ben in linux-next with no reported issues"

* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: Do not expect fixed layouts to grab a layout driver
  parport: Add support for Brainboxes IX/UC/PX parallel cards
  Revert "greybus: gb-beagleplay: Ensure le for values in transport"
  greybus: gb-beagleplay: Ensure le for values in transport
  greybus: BeaglePlay driver needs CRC_CCITT
  Revert "debugfs: annotate debugfs handlers vs. removal with lockd...

Merge tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Preserve syscall nr across execve(), slightly clean up drdtime(), fix
  the Clang built zboot kernel, fix a stack unwinder bug and several bpf
  jit bugs"

* tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: BPF: Fix unconditional bswap instructions
  LoongArch: BPF: Fix sign-extension mov instructions
  LoongArch: BPF: Don't sign extend function return value
  LoongArch: BPF: Don't sign extend memory load operand
  LoongArch: Preserve syscall nr across execve()
  LoongArch: Set unwind stack type to unknown rather than set error flag
  LoongArch: Slightly clean up drdtime()
  LoongArch: Apply dynamic relocations for LLD

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fixes for broken Loongson firmware

 - Fix lockdep splat

 - Fix FPU states when creating kernel threads

* tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Clear FPU states when setting up kernel threads
  MIPS: Loongson64: Handle more memory types passed from firmware
  MIPS: Loongson64: Enable DMA noncoherent support
  MIPS: Loongson64: Reserve vgabios memory on boot
  mips/smp: Call rcutree_report_cpu_starting() earlier

Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A random set of small bug fixes including:

   - Fix segfault on AmpereOne due to missing default metricgroup name

   - Fix segfault on `perf list --json` due to NULL pointer"

* tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback
  perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields
  perf metrics: Avoid segv if default metricgroup isn't set