- Sep 10, 2022
-
-
Frank Wunderlich authored
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
FUKAUMI Naoki authored
add support for user LEDs on Radxa ROCK 4C+ board. Signed-off-by:
FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.com Signed-off-by:
-
FUKAUMI Naoki authored
only user_led2 (blue) is supported. user_led1 (green) is not connected to any gpio so it cannot be controlled. Signed-off-by:
-
Chris Morgan authored
Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com Signed-off-by:
-
- Sep 06, 2022
-
-
Ondrej Jirman authored
Voltage constraints on vccio_sd are invalid. They don't match the voltages that LDO9 can generate, and this causes rk808-regulator driver to fail to probe with -EINVAL when it tries to apply the constraints during boot. Fix the constraints to something that LDO9 can be actually configured for. Fixes: 78a21c7d ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro") Signed-off-by:
Ondrej Jirman <megi@xff.cz> Reviewed-by:
Caleb Connolly <kc@postmarketos.org> Reviewed-by:
Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by:
-
- Sep 05, 2022
-
-
Jagan Teki authored
Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by:
Stephen Chen <stephen@radxa.com> Signed-off-by:
Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com Signed-off-by:
-
Jagan Teki authored
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by:
-
Jagan Teki authored
Document the dt-bindings for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Acked-by:
-
Martijn Braam authored
This is a basic DT containing regulators and UART, intended to be a base that myself and others can add additional nodes in future patches. Tested to work: booting from eMMC/SD, output over UART. https://wiki.pine64.org/wiki/PinePhone_Pro This is derived from the community pine64-org repo[0] with fixes from https://megous.com/git/linux. 0. https://gitlab.com/pine64-org/linux/-/commit/261d3b5f8ac503f97da810986d1d6422430c8531 Signed-off-by:
Martijn Braam <martijn@brixit.nl> Co-developed-by:
Kamil Trzciński <ayufan@ayufan.eu> [no SoB, but Kamil is happy for this patch to be submitted] Co-developed-by:
Nícolas F. R. A. Prado <n@nfraprado.net> Tested-by:
-
Tom Fitzhenry authored
Document board compatible names for Pine64 PinePhonePro. https://wiki.pine64.org/wiki/PinePhone_Pro Signed-off-by:
-
Andy Yan authored
EAIDK-610 is from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply This patch is test on Armbain and Glodroid with HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT. Signed-off-by:
Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com Signed-off-by:
-
Andy Yan authored
EAIDK-610 is a rk3399 based board from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.com Signed-off-by:
-
Andy Yan authored
Add vendor prefixes for OPEN AI LAB. Signed-off-by:
-
Michael Riesch authored
Add the MIPI CSI DPHY node to the RK356x device tree. Signed-off-by:
Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220720091527.1270365-4-michael.riesch@wolfvision.net Signed-off-by:
-
- Sep 04, 2022
-
-
Frank Wunderlich authored
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and set PCIe related regulators to always on. Suggested-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Frank Wunderlich authored
Add nodes to rk356x devicetree to support PCIe v3. Signed-off-by:
-
- Aug 29, 2022
-
-
Michael Riesch authored
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI connector and the M.2/NGFF connector use the non-default pins. Specify the correct pinctrl but leave the adapters disabled (as they are supposed to be activated by overlays that describe the external hardware). Signed-off-by:
-
Michael Riesch authored
The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI DSI connector. Add this regulator to the device tree of the board. Signed-off-by:
-
Michael Riesch authored
The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI CSI connector. Add this regulator to the device tree of the board. Signed-off-by:
-
- Aug 23, 2022
-
-
Nicolas Frattaroli authored
This adds the necessary device tree changes to enable analog audio output on the PINE64 Quartz64 Model B with its RK809 codec. The headphone detection pin is left out for now because I couldn't get it to work and am not sure if it even matters, but for future reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the schematic. Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20220721083301.3711-1-frattaroli.nicolas@gmail.com Signed-off-by:
-
- Aug 22, 2022
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix" * tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-liointc: Fix an error handling path in liointc_init() irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI irqchip/loongson-eiointc: Fix a build warning irqchip/loongson-eiointc: Fix irq affinity setting iommu/hyper-v: Use helper instead of directly accessing affinity
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 kprobes fix from Ingo Molnar: "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at such instructions, possibly resulting in incorrect execution (the wrong branch taken)" * tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix JNG/JNLE emulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Various fixes for tracing: - Fix a return value of traceprobe_parse_event_name() - Fix NULL pointer dereference from failed ftrace enabling - Fix NULL pointer dereference when asking for registers from eprobes - Make eprobes consistent with kprobes/uprobes, filters and histograms" * tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have filter accept "common_cpu" to be consistent tracing/probes: Have kprobes and uprobes use $COMM too tracing/eprobes: Have event probes be consistent with kprobes and uprobes tracing/eprobes: Fix reading of string fields tracing/eprobes: Do not hardcode $comm as a string tracing/eprobes: Do not allow eprobes to use $stack, or % for regs ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead tracing/perf: Fix double put of trace event when init fails tracing: React to error return from traceprobe_parse_event_name() -
Steven Rostedt (Google) authored
Make filtering consistent with histograms. As "cpu" can be a field of an event, allow for "common_cpu" to keep it from being confused with the "cpu" field of the event. Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 1e3bac71 ("tracing/histogram: Rename "cpu" to "common_cpu"") Suggested-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Steven Rostedt (Google) authored
Both $comm and $COMM can be used to get current->comm in eprobes and the filtering and histogram logic. Make kprobes and uprobes consistent in this regard and allow both $comm and $COMM as well. Currently kprobes and uprobes only handle $comm, which is inconsistent with the other utilities, and can be confusing to users. Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code") Suggested-by:
-
Steven Rostedt (Google) authored
Currently, if a symbol "@" is attempted to be used with an event probe (eprobes), it will cause a NULL pointer dereference crash. Both kprobes and uprobes can reference data other than the main registers. Such as immediate address, symbols and the current task name. Have eprobes do the same thing. For "comm", if "comm" is used and the event being attached to does not have the "comm" field, then make it the "$comm" that kprobes has. This is consistent to the way histograms and filters work. Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Signed-off-by:
-
Steven Rostedt (Google) authored
Currently when an event probe (eprobe) hooks to a string field, it does not display it as a string, but instead as a number. This makes the field rather useless. Handle the different kinds of strings, dynamic, static, relational/dynamic etc. Now when a string field is used, the ":string" type can be used to display it: echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Acked-by:
-
Steven Rostedt (Google) authored
The variable $comm is hard coded as a string, which is true for both kprobes and uprobes, but for event probes (eprobes) it is a field name. In most cases the "comm" field would be a string, but there's no guarantee of that fact. Do not assume that comm is a string. Not to mention, it currently forces comm fields to fault, as string processing for event probes is currently broken. Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Signed-off-by:
-
Steven Rostedt (Google) authored
While playing with event probes (eprobes), I tried to see what would happen if I attempted to retrieve the instruction pointer (%rip) knowing that event probes do not use pt_regs. The result was: BUG: kernel NULL pointer dereference, address: 0000000000000024 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:get_event_field.isra.0+0x0/0x50 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8 50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24 8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff916c9ea40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0 Call Trace: <TASK> get_eprobe_size+0xb4/0x640 ? __mod_node_page_state+0x72/0xc0 __eprobe_trace_func+0x59/0x1a0 ? __mod_lruvec_page_state+0xaa/0x1b0 ? page_remove_file_rmap+0x14/0x230 ? page_remove_rmap+0xda/0x170 event_triggers_call+0x52/0xe0 trace_event_buffer_commit+0x18f/0x240 trace_event_raw_event_sched_wakeup_template+0x7a/0xb0 try_to_wake_up+0x260/0x4c0 __wake_up_common+0x80/0x180 __wake_up_common_lock+0x7c/0xc0 do_notify_parent+0x1c9/0x2a0 exit_notify+0x1a9/0x220 do_exit+0x2ba/0x450 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Obviously this is not the desired result. Move the testing for TPARG_FL_TPOINT which is only used for event probes to the top of the "$" variable check, as all the other variables are not used for event probes. Also add a check in the register parsing "%" to fail if an event probe is used. Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Acked-by:
-
Yang Jihong authored
ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list. Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com Suggested-by:Yang Jihong <yangjihong1@huawei.com> Signed-off-by:
-
Steven Rostedt (Google) authored
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it will call perf_trace_event_unreg() which will not only unregister the perf trace event, but will also call the put() function of the tp_event. The problem here is that the trace_event_try_get_ref() is called by the caller of perf_trace_event_init() and if perf_trace_event_init() returns a failure, it will then call trace_event_put(). But since the perf_trace_event_unreg() already called the trace_event_put() function, it triggers a WARN_ON(). WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20 If perf_trace_event_reg() does not call the trace_event_try_get_ref() then the perf_trace_event_unreg() should not be calling trace_event_put(). This breaks symmetry and causes bugs like these. Pull out the trace_event_put() from perf_trace_event_unreg() and call it in the locations that perf_trace_event_unreg() is called. This not only fixes this bug, but also brings back the proper symmetry of the reg/unreg vs get/put logic. Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/ Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 1d18538e ("tracing: Have dynamic events have a ref counter") Reported-by:
Krister Johansen <kjlx@templeofstupid.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Lukas Bulwahn authored
The function traceprobe_parse_event_name() may set the first two function arguments to a non-null value and still return -EINVAL to indicate an unsuccessful completion of the function. Hence, it is not sufficient to just check the result of the two function arguments for being not null, but the return value also needs to be checked. Commit 95c104c3 ("tracing: Auto generate event name when creating a group of events") changed the error-return-value checking of the second traceprobe_parse_event_name() invocation in __trace_eprobe_create() and removed checking the return value to jump to the error handling case. Reinstate using the return value in the error-return-value checking. Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com Fixes: 95c104c3 ("tracing: Auto generate event name when creating a group of events") Acked-by:
Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A revert to fix a regression introduced this merge window and a fix for proper error handling in the remove path of the iMX driver" * tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: Make sure to unregister adapter on remove() Revert "i2c: scmi: Replace open coded device_get_match_data()"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: - memory leak fix - two small cleanups - trivial strlcpy removal - update missing entry for cifs headers in MAINTAINERS file * tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: move from strlcpy with unused retval to strscpy cifs: Fix memory leak on the deferred close cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl() cifs: remove unused server parameter from calc_smb_size() cifs: missing directory in MAINTAINERS file
-
Nick Desaulniers authored
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0. The minimum supported versions of these tools for the build according to Documentation/process/changes.rst are 5.1 and 11.0.0 respectively. Remove the feature detection script, Kconfig option, and clean up some fallback code that is no longer supported. The removed script was also testing for a GCC specific bug that was fixed in the 4.7 release. Also remove workarounds for bpftrace using clang older than 9.0.0, since other BPF backend fixes are required at this point. Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/ Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637 Acked-by:
Borislav Petkov <bp@suse.de> Suggested-by:
Masahiro Yamada <masahiroy@kernel.org> Suggested-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 21, 2022
-
-
Uwe Kleine-König authored
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is exited early, the i2c adapter stays around and the irq still calls its handler, while the driver data and the register mapping go away. So if later the i2c adapter is accessed or the irq triggers this results in havoc accessing freed memory and unmapped registers. So unregister the software resources even if resume failed, and only skip the hardware access in that case. Fixes: 588eb93e ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@kernel.org>
-
Wolfram Sang authored
This reverts commit 9ae551de . We got a regression report, so ensure this machine boots again. We will come back with a better version hopefully. Reported-by:
Josef Johansson <josef@oderland.se> Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.se Signed-off-by:
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix module versioning broken on some architectures - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128 - Remove -Wformat-zero-length, which has no warning instance - Fix the order between drivers and libs in modules.order - Fix false-positive warnings in clang-analyzer * tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check kbuild: fix the modules order between drivers and libs scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__ modpost: fix module versioning when a symbol lacks valid CRC
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix alignment for cpu map masks in event encoding. - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature that was added in this merge window. - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt, cpufeatures, i915_drm, kvm, vhost, perf_event. * tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Support reading PERF_FORMAT_LOST libperf: Add a test case for read formats libperf: Handle read format in perf_evsel__read() tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools headers kvm s390: Sync headers with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources perf beauty: Update copy of linux/socket.h with the kernel sources perf cpumap: Fix alignment for masks in event encoding perf cpumap: Compute mask size in constant time perf cpumap: Synthetic events and const/static perf cpumap: Const map for max()
-
