- May 16, 2012
-
-
Eric Lapuyade authored
This is an NFC driver for NXP pn544. Unlike pn544.c, this one is based on the NFC HCI and SHDLC kernel layers. Signed-off-by:
Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
H Hartley Sweeten authored
The variable 'nfc_genl_family' is only referenced in this file and should be marked static to prevent it from being exposed globally. Quites the sparse warning: warning: symbol 'nfc_genl_family' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
H Hartley Sweeten authored
The variable 'hci_nfc_ops' is only referenced in this file and should be marked static to prevent it from being exposed globally. Quites the sparse warning: warning: symbol 'hci_nfc_ops' was not declared. Should it be static? Signed-off-by:
-
H Hartley Sweeten authored
Pointers should be cleared with NULL, not 0. Quiets a couple sparse warnings of the type: warning: Using plain integer as NULL pointer Signed-off-by:
-
H Hartley Sweeten authored
Include the header to pickup the exported symbol prototype. Quites the sparse warning: warning: symbol 'nci_to_errno' was not declared. Should it be static? Signed-off-by:
-
H Hartley Sweeten authored
Pointers should be cleared with NULL, not 0. Quiets a couple sparse warnings of the type: warning: Using plain integer as NULL pointer Signed-off-by:
-
joseph daniel authored
nfc_llcp_general_bytes is defined in nfc/core.c as: nfc_llcp_general_bytes(struct nfc_dev *dev, size_t *gb_len). as in nfc/nfc.h: nfc_llcp_general_bytes(struct nfc_dev *dev, u8 *gb_len), if CONFIG_NFC_LLCP is not defined. so we got some warnings, net/nfc/core.c:207:2: warning: passing argument 2 of ‘nfc_llcp_general_bytes’ from incompatible pointer type [enabled by default] net/nfc/nfc.h:87:19: note: expected ‘u8 *’ but argument is of type ‘size_t *’ Signed-off-by:
joseph daniel <josephdanielwalter@gmail.com> Signed-off-by:
-
Samuel Ortiz authored
Otherwise an LLCP send() always returns 0. Signed-off-by:
-
Samuel Ortiz authored
Fix the poll mask depending on the socket state. POLLOUT was missing for example. Signed-off-by:
-
Samuel Ortiz authored
Blocking sockets should sleep on a CC (Connection Complete) reception from the connect() call. Signed-off-by:
-
Dan Carpenter authored
container_of() works by subtracting the offset of the member. The math can't really return a zero here. Sometimes people check it when they actually meant to check something else but in this case we can just remove the check. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Lapuyade authored
Document the new HCI ops and fix a few typos and spelling mistakes. Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Eric Lapuyade authored
It is now specified that nfc_target_found() and nfc_target_lost() core functions must not be called from an atomic context. This allow us to serialize calls and protect the targets table using the nfc device lock instead of a spinlock. Signed-off-by:
-
Eric Lapuyade authored
Signed-off-by:
-
Eric Lapuyade authored
The NFC Core now caches the active nfc target pointer, thereby avoiding the need to lookup the target table for each invocation of a driver ops. Consequently, pn533, HCI and NCI now directly receive an nfc_target pointer instead of a target index. Cc: Ilan Elias <ilane@ti.com> Signed-off-by:
-
Zefir Kurtisi authored
Signed-off-by:
Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by:
-
Larry Finger authored
There is a dummy read of a PCI MMIO register that occurs before the SSB bus has been powered, which is an error. This bug has not been seen earlier, but was apparently exposed when udev was updated to version 182. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Franky Lin authored
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdioh_card_regread as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
The new interface brcmf_sdio_regr/w provides result of access attempts. It is no longer necessary to use dedicated variable and function to provide enquiry for failure. Reviewed-by:
-
Franky Lin authored
The new brcmf_sdio_regrl/regwl interface has already performed retries on failed attempts. It is no longer necessary to have the retry mechanism in r_sdreg32/w_sdreg32. Reviewed-by:
-
Franky Lin authored
Use the newly introduced brcmf_sdio_regwl to replace brcmf_sdcard_reg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by:
-
Franky Lin authored
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdcard_reg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by:
-
Franky Lin authored
Use the newly introduced brcmf_sdio_regwb to replace brcmf_sdcard_cfg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by:
-
Franky Lin authored
Use the newly introduced brcmf_sdio_regrb to replace brcmf_sdcard_cfg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by:
-
Franky Lin authored
Both brcmf_sdcard_cfg_read/write and brcmf_sdcard_reg_read/write are used as interface functions for register access of SDIO WiFi dongle. A unified interface brcmf_sdio_regr/w is introduced in this patch in order to simplify the interface and keep the complexity within the lower layer. Reviewed-by:
-
Franky Lin authored
brcmf_sdcard_set_sbaddr_window configures 3 registers on SDIO function misc bank to change current silicon backplane programming window. This patch makes it call brcmf_sdioh_request_byte directly in order to prepare for the write register interface unification. Reviewed-by:
-
Franky Lin authored
The size parameter for brcmf_sdcard_reg_write is always 4. Remove it to make the code cleaner. Reviewed-by:
-
Franky Lin authored
The size parameter for brcmf_sdcard_reg_read is always 4. Remove it to make the code neat. Reviewed-by:
-
Sujith Manoharan authored
This patch fixes multiple issues with the current RTT implementation in ath9k. * The data that is obtained from the RTT interface registers are stored in 31:5 - mask out the extra bits when reading them. * A history buffer is maintained which is not needed at all. Remove this array and just store the baseband data for each chain (or bank). * A 'num_readings' variable was being used to handle the last entry. But it was being used in an improper manner, with the result that the RTT values were never being written to the RTT Interface registers. Fix this by using a simple flag. * Stop baseband operations before programming the calibration values to the HW. * Do not restore RX gain settings as part of RTT. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Chun-Yeow Yeoh authored
Forwarded PREQ is either unicast or multicast. The appropriate counters should be incremented accordingly. Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by:
-
Thomas Pedersen authored
Only send a cfg80211 new peer candidate notification if userspace has yet to allocate this station entry. Signed-off-by:
Thomas Pedersen <thomas@cozybit.com> Signed-off-by:
-
Emmanuel Grumbach authored
If the BA session is torn down before we had a chance to start it we shouldn't disable the AGG tx queues that weren't enabled. This can happen in two cases: 1) We get a delBA before we drained our Tx queues in agg start flow 2) We didn't get the (successfull) addBA response on time Reported-by:
Daniel Chyan <dchyan@princeton.edu> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
We have TX_REPLY for that. Signed-off-by:
-
Amit Beka authored
The power index that the user gives as module parameter in in range 1-5, but we need to decrease it in order to create an array index out of it (0-4) for the power table command. Signed-off-by:
Amit Beka <amit.beka@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Once driver decide to change reduced tx power behavior, make sure the reduce tx power valid bit is set Change-Id: I3afae96319292d8cb347a812a948085c5db7ad91 Signed-off-by:
-
Wey-Yi Guy authored
Change-Id: Ia6294d651dcffdcaf8b62e67bcef52bd8c158dea Signed-off-by:
-
Wey-Yi Guy authored
In bt coex, consider the average rssi as part of decision making process Change-Id: I8d11d7f177a6875e2a9d08f7539d42253226fd7a Signed-off-by:
-
Marcel Holtmann authored
The SHDLC link layer of HCI based drivers uses CRC-CCITT and thus needs to select that kernel option. Otherwise it ends up with this linking error: net/built-in.o: In function `nfc_shdlc_add_len_crc': net/nfc/hci/shdlc.c:113: undefined reference to `crc_ccitt' Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Acked-by:
-
Bing Zhao authored
Documentation/CodingStyle says "Do not unnecessarily use braces where a single statement will do." Use "switch/case", instead of "if/else_if/else", so that more cases can be added later. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
