Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Frank Rowand <frank.rowand@am.sony.com> reports:

> In linux-2.6.24-rc4 the Toshiba RBTX4927 hangs on boot.
>
> The cause is that plat_time_init() from arch/mips/tx4927/common/
> tx4927_setup.c does not override the __weak plat_time_init() from
> arch/mips/kernel/time.c.  This is due to a compiler bug in gcc 4.1.1.  The
> bug is reported to not exist in earlier versions of gcc, and to be fixed in
> 4.1.2.  The problem is that the __weak plat_time_init() is empty and thus
> gets optimized out of existence (thus the linker is never given the option
> to replace the __weak function).

[ He meant the call to plat_time_init() from time_init() gets optimized away ]

> For more info on the gcc bug see
>
>    http://gcc.gnu.org/bugzilla/show_bug.cgi?id=27781


>
> The attached patch is one workaround.  Another possible workaround

[ His patch adds -fno-unit-at-a-time for time.c ]

> would be to change the __weak plat_time_init() to be a non-empty
> function.

The __weak definition of plat_time_init was only ever meant to be a
migration helper to keep platforms that don't have a plat_time_init
compiling.  A few greps says that all platforms now supply their own
plat_time_init() so the weak definition is no longer needed.  So I
instead delete it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There might be other reasons why a resource might be marked as fixed
such as a PCI UART holding the system console but until we use
IORESOURCE_PCI_FIXED that way also this will work.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

A proper fix for this needs to turn a few MIPS-generic bits which I
don't want at this stage.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

the PCI specific code in this function doesn't check for the address range
being under the upper bound of the PCI memory window correctly -- fix this,
somewhat beautifying the code around the check, while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

... by getting the PCI resources back into the 32-bit range -- there's no
need therefore for CONFIG_RESOURCES_64BIT either. This makes Alchemy PCI
work again while currently the kernel skips the bus scan.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix endless loop in cheetah_xcall_deliver().
  [SERIAL] sparc: Infrastructure to fix section mismatch bugs.

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/isp1301_omap: Build fix
  i2c: Add missing spaces in split log messages
  i2c-gpio: Initialize adapter class
  i2c: Delete an outdated piece of documentation

We need to mask out the proper bits when testing the dispatch status
register else we can see unrelated NACK bits from previous cross call
sends.

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch against 2.6.23 sparc-2.6.git contains a number of minor
cleanups of the sparc serial drivers.  Initially I fixed this build
warning:

WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios')

which is done by declaring sunserial_console_match() as __init.  This
resulted in build warnings on sunserial_current_minor.  To resolve
these the variable was changed so it is no longer global, and to hide
operations on it inside 2 new functions. These functions handle the
UART minor handling code that is common to all sparc serial drivers.

These changes allowed to clean up the uart counters in all the sparc
serial drivers, and the administration of minor device numbers.

Lastly, sunserial_console_termios() does not need to be exported since
it is only called from non-modular code.

Sadly, the following build warning still exists:

WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors')

This could be resolved by not exporting sunserial_console_match(), but
this is not possible at the moment because it is being called from
modular code. On the other hand, this is a bogus warning since it
comes from a ksymtab section.

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Build fix to the isp1301_omap driver ... this driver gets built
more often in the OMAP tree than in mainline, partly because the
defconfig for H2 (plus probably H3 and H4) needs updating.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This is required to let hwmon drivers attach to the adapter.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I'm amazed that this old piece of documentation managed to survive
until today.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by
a previous patch. However, videobuf_dvb needs this.

This patch re-adds videobuf_read_start, doing the proper lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This reverts commit 70eba18b

, as per
Jeff Garzik:

   "That was meant for 2.6.25, and actually (due to patching) applied to
    a completely unrelated 2.6.24 net driver."

Noted-by: Roland Dreier <rdreier@cisco.com>
Requested-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following section mismatch with CONFIG_HOTPLUG=n:

<--  snip  -->

...
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This patch fixes the following section mismatch with CONFIG_HOTPLUG=n:

<--  snip  -->

...
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

As reported by Andrew Morton:

> ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
> ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
> ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined!
> ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined!
> ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined!
> ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

On Tue, 4 Dec 2007, Ingo Molnar wrote:

>  drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach':
>  : undefined reference to `dib3000mc_get_tuner_i2c_master'
>  drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach':
>  : undefined reference to `dib3000mc_set_config'

Seems like -common part contains also code that is not completely
common to all the modules.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch

drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found
drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

There are several months my hvr1110 stop working.
This is very simple to fix, for my card revision at least, by setting a
missing field to the hauppauge_hvr_1110_config.

Signed-off-by: Benoit Istin <beistin@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This is pretty serious bug.  map->count is never initialized after the
call to kmalloc making the count start at some random trash value.  The
end result is leaking videobufs.

Also, fix up the debug statements to print unsigned values.

Pushed to http://ifup.org/hg/v4l-dvb

 too

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The saa7134 video driver starts dropping frames when used together with the
saa7134-alsa driver. Frames are dropped because when an audio event is waiting
the driver simply ignores the interrupt and passes it on to the saa7134-alsa
interrupt handler. The alsa interrupt handler in turn acknowledges all types
of events thus clearing the pending video events as well. Fix by only masking
out the audio event in the video interrupt handler and by only acknowledging
the audio event in the alsa driver.

Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The vmux for composite over s-video input was wrong.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Complement va_start() with va_end() + minor style fixes in the same function.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The period handling in saa7134-alsa is broken in two ways. First, the
minimum number of periods of two does not work, because the dma is setup
two periods ahead in the irq handler. Fix the minimum to four periods.
Second, the code assumes that the number of periods is divisible by two,
which isn't always the case on ALSA. Fix by adding a constraint.

Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The default adc_clock for the zl10353 is different from what was originally
thought to be the case and the TRL nominal rate formula was incorrect as a
result.  Use a better (and hopefully now correct) formula.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Fallout from videobuf_mmap_setup() locking fixes.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Drivers were using cookie cutter code for stopping the read/stream.  Use the
new videobuf_stop function which is lock safe.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

- Add comments to functions that require that caller hold q->lock
- Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf
- Add locking to videobuf_mmap_free
- Fix linux/drivers/media/common/saa7146_video.c which was holding lock around
  videobuf_read_stop
- Add locking to functions that operate on a queue
- Add videobuf_stop to take care of stopping in both the read and stream case

TODO: bttv still has an unsafe call to videobuf_queue_is_busy

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This is a modified version of a patch previously posted by Thomas
Unverzagt.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Markus Reichberger to point this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The attached patch is required so that the autodetecion code also works after
a reboot.

Setting the I2C speed does not seem to be supported for em2800.

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

If we get an error during the actual policy lookup we don't free the
original dst while the caller expects us to always free the original
dst in case of error.

This patch fixes that.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vlan module cleanup function starts with

	vlan_netlink_fini();
	vlan_ioctl_set(NULL);

The first call removes all the vlan devices and
the second one closes the vlan ioctl.

AFAIS there's a tiny race window between these two
calls - after rtnl unregistered all the vlans, but
the ioctl handler isn't set to NULL yet, user can
manage to call this ioctl and create one vlan device,
and that this function will later BUG_ON seeing
non-emply hashes.

I think, that we must first close the vlan ioctl
and only after this remove all the vlans with the
vlan_netlink_fini() call.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are some return value comments for void functions.
Fixed it.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>