- Feb 18, 2014
-
-
Hartmut Knaack authored
This patch fixes some typos in max1363_chip_info_tbl[]. Signed-off-by:
Hartmut Knaack <knaack.h@gmx.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Hartmut Knaack authored
Switch the ad799x driver to use the regulator framework and add binding for reference voltage. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Hartmut Knaack authored
Fix a typo in the copyright message. Signed-off-by:
-
- Feb 15, 2014
-
-
Fabio Estevam authored
No need to return a 'fake' return value on platform_get_irq() failure. Just return the error code itself instead. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Manuel Stahl authored
Signed-off-by:
Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by:
-
Peter Meerwald authored
the property is not per-channel, but shared by type Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Cc: Kravchenko Oleksandr <x0199363@ti.com> Signed-off-by:
-
Jonathan Cameron authored
This macro no longer allows all the elements of the scan_type structure to be set. Missinterpretation of the parameters also caused a couple of recent bugs. No mainline drivers now use this macro so drop it. Signed-off-by: -
Fugang Duan authored
The patch adds the binding file for Freescale vf610 ADC driver. CC: Shawn Guo <shawn.guo@linaro.org> CC: Jonathan Cameron <jic23@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Peter Meerwald <pmeerw@pmeerw.net> CC: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Fugang Duan authored
Add Freescale Vybrid vf610 adc driver. The driver only support ADC software trigger. VF610 ADC device documentation is available at below reference manual (chapter 37): http://cache.freescale.com/files/32bit/doc/ref_manual/VYBRIDRM.pdf ? fpsp=1&WT_TYPE=Reference%20Manuals&WT_VENDOR=FREESCALE&WT_FILE_FORMAT =pdf&WT_ASSET=Documentation CC: Shawn Guo <shawn.guo@linaro.org> CC: Jonathan Cameron <jic23@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Peter Meerwald <pmeerw@pmeerw.net> CC: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Peter Meerwald authored
temperature is reported in milli-Celsius Signed-off-by:
-
Hartmut Knaack authored
Signed-off-by:
-
Mark Asselstine authored
To avoid buffer overflow while reading a corrupted or possibly modified port file we validate the length of each part of the port record to ensure it doesn't exceed the length of the destination buffer. https://bugzilla.kernel.org/show_bug.cgi?id=69931 Signed-off-by:
Mark Asselstine <asselsm@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Remove the unnecessary checks in pcl816_ai_cmd(). Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Remove the unnecessary checks in pcl812_ai_cmd(). Signed-off-by:
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Refactor the code in das800_ai_do_cmd() to use if/else instead of the switch since the default cases can never be reached. Signed-off-by:
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Refactor the code in waveform_ai_cmd() to remove the final else which can never be reached. Signed-off-by:
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Refactor the code in cb_pcidas_ai_cmd() to remove the final else which can never be reached. Signed-off-by:
-
H Hartley Sweeten authored
This driver has a (*do_cmdtest) function for analog input async command support but the (*do_cmd) function just returns -EINVAL. Remove the incomplete async command support. Signed-off-by:
-
H Hartley Sweeten authored
The trigger sources were already validataed in the (*do_cmdtest) before the (*do_cmd) is called. Refactor the code in pci9111_ai_do_cmd() to use if/else instead of the switch since the default cases can never be reached. Signed-off-by:
-
H Hartley Sweeten authored
Currently the (*do_cmdtest) indicates that TRIG_TIMER is a valid scan_begin_src but later this source is tested as -EINVAL. To simplify the code a bit just remove the TRIG_TIMER source. Signed-off-by:
-
H Hartley Sweeten authored
Remove the unnecessary check of 'cmd->chanlist_len > 0'. The (*do_cmdtest) already validated this before the (*do_cmd) was called. Signed-off-by:
-
H Hartley Sweeten authored
It's not necessary to clear the returned data pointer when an (*insn_read) times out. For aesthetics, remove all of these in the drivers. Signed-off-by:
-
H Hartley Sweeten authored
Have the comedi core display a standard dev_dbg() message when a timeout occurs and remove all the driver specific messages. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input settle and end-of- conversion. These tests use different registers but the same bit so the register is passed as the 'context'. The same test is used in dmm32at_ai_cmd() but the 'insn' is not available. This is ok since the test function, and comedi_timeout() don't use it. Use comedi_timout() to wait for the analog output end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Combine the logic for the pcl812 and acl812 end-of-conversion in the helper function to simplify the driver. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input pipe full, scanning, amd end-of-conversion status. The status to check it passed as the 'context' to comedi_timeout(). Use comedi_timeout() to wait for the analog output end-of-conversion. This also fixes a possible bug where invalid data is returned for the analog input read if the conversion did not complete, The analog output has a similar possible bug where the cached readback value is incorrect if the conversion times out. Signed-off-by:
-
H Hartley Sweeten authored
The wait_for() macro in this driver is a bit nasty. It effects control flow which according to the CodingStyle is a _very_ bad idea. The mux_busy() and ad_done() macros are also bad since they rely on a local variable having a specific name. Remove these macros and use comedi_timeout() to wait for the analog input mux busy completion and end-of-conversion. Both of these are detected by reading the same register and testing different bits. Pass the bits to test as the 'context' to the callback function. The dt282x_ai_cmd() function also checks for the mux busy completion. The 'insn' is not available here but passing NULL is safe because nothing uses it. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. This prevents a deadlock condition that could occur by providing a timeout in case the end-of-conversion does not happen. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input and output end-of- conversions. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input and output end-of- conversion. Use break to exit the loop when a timeout occurs during the analog input read so that common code can be used to disable the device. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Also, remove some unnecessary comments. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. This also fixes a possible bug where invalid data is returned if the conversion did not complete. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by:
-
