This patch cleans up the code to flush device table entries
in the IOMMU. With this chance the driver can get rid of the
iommu_queue_inv_dev_entry() function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds a function to flush a DTE entry for a given
struct device and replaces iommu_queue_inv_dev_entry calls
with this function where appropriate.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch cleans up the attach_device and detach_device
paths and fixes reference counting while at it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch introduces a list to each protection domain which
keeps all devices associated with the domain. This can be
used later to optimize certain functions and to completly
remove the amd_iommu_pd_table.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds a reference count to each device to count
how often the device was bound to that domain. This is
important for single devices that act as an alias for a
number of others. These devices must stay bound to their
domains until all devices that alias to it are unbound from
the same domain.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch changes IOMMU code to use dev->archdata->iommu to
store information about the alias device and the domain the
device is attached to.
This allows the driver to get rid of the amd_iommu_pd_table
in the future.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch makes device isolation mandatory and removes
support for the amd_iommu=share option. This simplifies the
code in several places.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch rearranges two dma_ops related functions so that
their forward declarations are not longer necessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch moves alloc_pte() and fetch_pte() into the page
table handling code section so that the forward declarations
for them could be removed.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This function doesn't use the parameter anymore so it can be
removed.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The logic of these two functions is reimplemented (at least
in parts) in places in the code. This patch removes these
code duplications and uses the functions instead. As a side
effect it moves check_device() to the helper function code
section.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This is a helper function and when its placed in the helper
function section we can remove its forward declaration.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

With the previous changes the get_device_resources function
can be simplified even more. The only important information
for the callers is the protection domain.
This patch renames the function to get_domain() and let it
only return the protection domain for a device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

If there is no domain associated to a device yet and the
device has an alias device which already has a domain, the
original device needs to have the same domain as the alias
device.
This patch changes domain_for_device to handle this
situation and directly assigns the alias device domain to
the device in this situation.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch finishes the removal of all iommu specific
handling code in the dma_ops path.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

With the prior changes this parameter is not longer
required. This patch removes it from the function and all
callers.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Since the assumption that an dma_ops domain is only bound to
one IOMMU was given up we need to make alloc_new_range aware
of it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The parameter is unused in these function so remove it from
the parameter list.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Every call-place of get_device_resources calls check_device
before it. So call it from get_device_resources directly and
simplify the code.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The check_device logic needs to include the dma_supported
checks to be really sure. Merge the dma_supported logic into
check_device and use it to implement dma_supported.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The non-present cache flag was IOMMU local until now which
doesn't make sense. Make this a global flag so we can remove
the lase user of 'struct iommu' in the map/unmap path.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch reimplements the function
flush_all_domains_on_iommu to use the global protection
domain list.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch reimplementes the amd_iommu_flush_all_domains
function to use the global protection domain list instead
of flushing every domain on every IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds code to keep a global list of all protection
domains. This allows to simplify the resume code.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This iommu_flush_tlb_pde function does essentially the same.
So the iommu_flush_domain function is redundant and can be
removed.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch re-implements iommu_flush_tlb functions to use
the __iommu_flush_pages logic.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch extends the iommu_flush_pages function to flush
the TLB entries on all IOMMUs the domain has devices on.
This basically gives up the former assumption that dma_ops
domains are only bound to one IOMMU in the system.
For dma_ops domains this is still true but not for
IOMMU-API managed domains. Giving this assumption up for
dma_ops domains too allows code simplification.
Further it splits out the main logic into a generic function
which can be used by iommu_flush_tlb too.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds a function to the AMD IOMMU driver which
completes all queued commands an all IOMMUs a specific
domain has devices attached on. This is required in a later
patch when per-domain flushing is implemented.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds reference counting for protection domains
per IOMMU. This allows a smarter TLB flushing strategy.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds an index field to struct amd_iommu which can
be used to lookup it up in an array. This index will be used
in struct protection_domain to keep track which protection
domain has devices behind which IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch updates the copyright headers in the relevant AMD
IOMMU driver files to match the date of the latest changes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch moves all function declarations which are only
used inside the driver code to a seperate header file.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

iommu=soft boot option forces the kernel to use swiotlb.

( This has the side-effect of enabling the swiotlb over the
  GART if this boot option is provided. This is the desired
  behavior of the swiotlb boot option and works like that
  for all other hw-IOMMU drivers. )

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: yinghai@kernel.org
LKML-Reference: <20091125084611O.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

For some devices the ACPI table may define unity map
requirements which must me met when the IOMMU is enabled. So
we need to attach devices to their domains as early as
possible so that these mappings are in place when needed.
This patch assigns the domains right after they are
allocated. Otherwise this can result in I/O page faults
before a driver binds to a device and BIOS is still using
it.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This function may be called on the resume path and can not
be dropped after booting.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Clean up various small stylistic details in the GART code. No
functionality changed.

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: muli@il.ibm.com
Cc: joerg.roedel@amd.com
LKML-Reference: <1258287594-8777-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This cleans up iommu_alloc() a bit and removes unnecessary
DMA_ERROR_CODE usage.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: muli@il.ibm.com
Cc: joerg.roedel@amd.com
LKML-Reference: <1258287594-8777-4-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This kills bad_dma_address variable, the old mechanism to enable
IOMMU drivers to make dma_mapping_error() work in IOMMU's
specific way.

bad_dma_address variable was introduced to enable IOMMU drivers
to make dma_mapping_error() work in IOMMU's specific way.
However, it can't handle systems that use both swiotlb and HW
IOMMU. SO we introduced dma_map_ops->mapping_error to solve that
case.

Intel VT-d, GART, and swiotlb already use
dma_map_ops->mapping_error. Calgary, AMD IOMMU, and nommu use
zero for an error dma address. This adds DMA_ERROR_CODE and
converts them to use it (as SPARC and POWER does).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: muli@il.ibm.com
Cc: joerg.roedel@amd.com
LKML-Reference: <1258287594-8777-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

GART IOMMU is the only user of bad_dma_address variable.

This patch converts GART to use the newer mechanism, fill in
->mapping_error() in struct dma_map_ops, to make
dma_mapping_error() work in IOMMU specific way.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: muli@il.ibm.com
Cc: joerg.roedel@amd.com
LKML-Reference: <1258287594-8777-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Add fixes we'll depend on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>