- Jun 21, 2011
-
-
cpw@sgi.com authored
Correct the UV2 broacast assist unit's destination timeout period. And the activation status register in UV2 should be tested for a destination timeout with a 4, not a 2. The values for Active versus Timeout were reversed. This patch is critical for TLB shootdown on an Altix UV2 system (i.e. the follow-on to the current Altix UV). Destination timeout period: The period is set in 4 bits of memory-mapped register MISC_CONTROL. The left bit toggles base period between 10us and 80us. The other 3 bits are the multiplier. Decimal 15, hex f, gives the maximum: 7 * 80us Signed-off-by:
Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20110621122243.117324443@sgi.com Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
cpw@sgi.com authored
Fix a memory leak in init_per_cpu() when the topology check fails. The leak should never occur on deployed systems. It would only occur in an unexpected topology that would make the BAU unuseable as a result. Signed-off-by:
-
cpw@sgi.com authored
Remove the large stack-resident cpumask_t from reset_with_ipi()'s stack by allocating one per uvhub. Due to the limited size of the stack the potentially huge cpumask_t may cause stack overrun. We haven't seen it happen yet, but we need to make it a practice not to push such structures onto the stack. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/20110621122242.832589130@sgi.com Signed-off-by:
-
cpw@sgi.com authored
Rename 'bau_targ_hubmask' to 'pnmask' for clarity. The BAU distribution bit mask is indexed by pnode number, not hub or blade number. This important fact is not clear while the mask is called a 'hubmask'. Signed-off-by:
-
cpw@sgi.com authored
Fix reset_with_ipi() to look up a cpu for a blade based on the distribution map being indexed by the potentially sparsely numbered pnode. This patch is critical to tlb shootdown on a partitioned UV system, or one with nonconsecutive blade numbers. The distribution map bits represent pnodes relative to the partition base pnode. Previous to this patch it had been assuming bits based on 0-based, consecutive blade ids. Signed-off-by:
-
cpw@sgi.com authored
Fix for the topology in which there is a socket 1 on a blade with no socket 0. Only call make_per_cpu_thp() for present sockets. We have only seen this fail for internal configurations. Signed-off-by:
-
cpw@sgi.com authored
Make all the functions in uv_bau.h inline so that it can be included in the fake prom (used in simulations). If not inlined the unused functions will generate compiler warnings. Signed-off-by:
-
cpw@sgi.com authored
Fix a call by tunables_write() to smp_processor_id() within a preemptable region. Call get_cpu()/put_cpu() around the region where the returned cpu number is actually used, which makes it non-preemptable. A DEBUG_PREEMPT warning is prevented. UV does not support cpu hotplug yet, but this is a step toward that ability as well. Signed-off-by:
-
- Jun 03, 2011
-
-
Jack Steiner authored
Enable 64-bit ACPI MFCG support for SGI UV2 platform. The check is similar to the check on UV1. UV2 has a different oem_id string. Signed-off-by:
Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110602195943.GA27079@sgi.com Signed-off-by:
-
- May 30, 2011
-
-
Jack Steiner authored
No code changes. Reformat definitions to make it more readable. I fixed alignment of comments in the structure definitions. Also aligned comments and most field definitions & values. Also sorted the defines for the SHIFT & MASK values for each MMR. This make the file visually much more acceptable. Some of the symbol names are still quite long. The file is based on post-processing of verilog definitions that are used for the node controller chip design. Although some symbol names are not what I would chose, I would like to maintain compatibility with the names used by the chip designers. We have a number of cross-reference utilities & having common names is important. Signed-off-by:
-
Linus Torvalds authored
.. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Remove ecryptfs_header_cache_2 eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() eCryptfs: Return useful code from contains_ecryptfs_marker eCryptfs: Fix new inode race condition eCryptfs: Cleanup inode initialization code eCryptfs: Consolidate inode functions into inode.c
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits) pnfs-obj: pg_test check for max_io_size NFSv4.1: define nfs_generic_pg_test NFSv4.1: use pnfs_generic_pg_test directly by layout driver NFSv4.1: change pg_test return type to bool NFSv4.1: unify pnfs_pageio_init functions pnfs-obj: objlayout_encode_layoutcommit implementation pnfs: encode_layoutcommit pnfs-obj: report errors and .encode_layoutreturn Implementation. pnfs: encode_layoutreturn pnfs: layoutret_on_setattr pnfs: layoutreturn pnfs-obj: osd raid engine read/write implementation pnfs: support for non-rpc layout drivers pnfs-obj: define per-inode private structure pnfs: alloc and free layout_hdr layoutdriver methods pnfs-obj: objio_osd device information retrieval and caching pnfs-obj: decode layout, alloc/free lseg pnfs-obj: pnfs_osd XDR client implementation pnfs-obj: pnfs_osd XDR definitions pnfs-obj: objlayoutdriver module skeleton ...
-
Linus Torvalds authored
We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by:
-
Tyler Hicks authored
Now that ecryptfs_lookup_interpose() is no longer using ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to ecryptfs_header_cache. Signed-off-by:Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
ecryptfs_lookup_interpose() has turned into spaghetti code over the years. This is an effort to clean it up. - Shorten overly descriptive variable names such as ecryptfs_dentry - Simplify gotos and error paths - Create helper function for reading plaintext i_size from metadata It also includes an optimization when reading i_size from the metadata. A complete page-sized kmem_cache_alloc() was being done to read in 16 bytes of metadata. The buffer for that is now statically declared. Signed-off-by: -
Tyler Hicks authored
Instead of having the calling functions translate the true/false return code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or -EINVAL so that the calling functions can just reuse the return code. Also, rename the function to ecryptfs_validate_marker() to avoid callers mistakenly thinking that it returns true/false codes. Signed-off-by: -
Tyler Hicks authored
Only unlock and d_add() new inodes after the plaintext inode size has been read from the lower filesystem. This fixes a race condition that was sometimes seen during a multi-job kernel build in an eCryptfs mount. https://bugzilla.kernel.org/show_bug.cgi?id=36002 Signed-off-by:
David <david@unsolicited.net> Tested-by:
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits) acer-wmi: support integer return type from WMI methods msi-laptop: fix section mismatch in reference from the function load_scm_model_init acer-wmi: support to set communication device state by new wmid method acer-wmi: allow 64-bits return buffer from WMI methods acer-wmi: check the existence of internal 3G device when set capability platform/x86:delete two unused variables support wlan hotkey on Acer Travelmate 5735Z platform-x86: intel_mid_thermal: Fix memory leak platform/x86: Fix Makefile for intel_mid_powerbtn platform/x86: Simplify intel_mid_powerbtn acer-wmi: Delete out-of-date documentation acerhdf: Clean up includes acerhdf: Drop pointless dependency on THERMAL_HWMON acer-wmi: Update MAINTAINERS wmi: Orphan ACPI-WMI driver tc1100-wmi: Orphan driver acer-wmi: does not allow negative number set to initial device state platform/oaktrail: ACPI EC Extra driver for Oaktrail thinkpad_acpi: Convert printks to pr_<level> thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning ...
-
Linus Torvalds authored
Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c11ae035>] find_next_bit+0x55/0xb0 Call Trace: [<c11addda>] cpumask_any_but+0x2a/0x70 [<c102396b>] flush_tlb_mm+0x2b/0x80 [<c1022705>] pud_populate+0x35/0x50 [<c10227ba>] pgd_alloc+0x9a/0xf0 [<c103a3fc>] mm_init+0xec/0x120 [<c103a7a3>] mm_alloc+0x53/0xd0 which was introduced by commit de03c72c ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by:Thomas Gleixner <tglx@linutronix.de> Reported-by:
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] mm: fix mmu_gather rework [S390] mm: fix storage key handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: more /proc and /sys file support
-
Matthew Garrett authored
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd: make local functions static NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() NFSD: Check status from nfsd4_map_bcts_dir() NFSD: Remove setting unused variable in nfsd_vfs_read() nfsd41: error out on repeated RECLAIM_COMPLETE nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence nfsd v4.1 lOCKT clientid field must be ignored nfsd41: add flag checking for create_session nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly nfsd4: fix wrongsec handling for PUTFH + op cases nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller nfsd4: introduce OPDESC helper nfsd4: allow fh_verify caller to skip pseudoflavor checks nfsd: distinguish functions of NFSD_MAY_* flags svcrpc: complete svsk processing on cb receive failure svcrpc: take advantage of tcp autotuning SUNRPC: Don't wait for full record to receive tcp data svcrpc: copy cb reply instead of pages svcrpc: close connection if client sends short packet svcrpc: note network-order types in svc_process_calldir ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: return client directly and not through a pointer dm kcopyd: reserve fewer pages dm io: use fixed initial mempool size dm kcopyd: alloc pages from the main page allocator dm kcopyd: add gfp parm to alloc_pl dm kcopyd: remove superfluous page allocation spinlock dm kcopyd: preallocate sub jobs to avoid deadlock dm kcopyd: avoid pointless job splitting dm mpath: do not fail paths after integrity errors dm table: reject devices without request fns dm table: allow targets to support discards internally
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Support for RPC over AF_LOCAL transports SUNRPC: Remove obsolete comment SUNRPC: Use AF_LOCAL for rpcbind upcalls SUNRPC: Clean up use of curly braces in switch cases NFS: Revert NFSROOT default mount options SUNRPC: Rename xs_encode_tcp_fragment_header() nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() nfs41: Correct offset for LAYOUTCOMMIT NFS: nfs_update_inode: print current and new inode size in debug output NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors NFSv4: Handle expired stateids when the lease is still valid SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Fix sanity check patches on big-endian systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI EC: remove redundant code ACPI: Add D3 cold state ACPI: processor: fix processor_physically_present in UP kernel ACPI: Split out custom_method functionality into an own driver ACPI: Cleanup custom_method debug stuff ACPI EC: enable MSI workaround for Quanta laptops ACPICA: Update to version 20110413 ACPICA: Execute an orphan _REG method under the EC device ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place ACPICA: Update internal address SpaceID for DataTable regions ACPICA: Add more methods eligible for NULL package element removal ACPICA: Split all internal Global Lock functions to new file - evglock ACPI: EC: add another DMI check for ASUS hardware ACPI EC: remove dead code ACPICA: Fix code divergence of global lock handling ACPICA: Use acpi_os_create_lock interface ACPI: osl, add acpi_os_create_lock interface ACPI:Fix goto flows in thermal-sys
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6Linus Torvalds authored
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param x86 idle: deprecate "no-hlt" cmdline param x86 idle APM: deprecate CONFIG_APM_CPU_IDLE x86 idle floppy: deprecate disable_hlt() x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it x86 idle: clarify AMD erratum 400 workaround idle governor: Avoid lock acquisition to read pm_qos before entering idle cpuidle: menu: fixed wrapping timers at 4.294 seconds
-
Al Viro authored
Commit 1495f230 ("vmscan: change shrinker API by passing shrink_control struct") changed the API of ->shrink(), but missed ubifs and cifs instances. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Boaz Harrosh authored
Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> [simplify logic] Signed-off-by:
Benny Halevy <bhalevy@panasas.com>
-
Boaz Harrosh authored
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: -
Boaz Harrosh authored
* Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by:
-
Benny Halevy authored
Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: -
Boaz Harrosh authored
An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by:
-
Andy Adamson authored
Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by:
Andy Adamson <andros@netapp.com> [fixup layout header pointer for encode_layoutreturn] Signed-off-by:
-
Benny Halevy authored
With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by:
-
