- May 21, 2005
-
-
James Bottomley authored
-
Christoph Hellwig authored
This document is rather rudimentary and totally outdated. Fortunately Documentation/scsi/scsi_mid_low_api.txt replaces it quite nicely. Signed-off-by:James Bottomley <James.Bottomley@SteelEye.com>
-
Tejun Heo authored
scsi_queue_insert() has four callers. Three callers call with timer disabled and one (the second invocation in scsi_dispatch_cmd()) calls with timer activated. scsi_queue_insert() used to always call scsi_delete_timer() and ignore the return value. This results in race with timer expiration. Remove scsi_delete_timer() call from scsi_queue_insert() and make the caller delete timer and check the return value. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Tejun Heo authored
'if' tests which check if eh_action isn't NULL in both functions are always true. Remove the redundant if's as it can give wrong impressions. Signed-off-by:
-
Tejun Heo authored
scsi_reset_provider() calls scsi_delete_timer() on exit which isn't necessary. Remove it. Signed-off-by:
-
Gerd Knorr authored
Here is a incremental patch which switches the driver over to the new non-simple functions. Compile-tested. Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
This patch adds a device driver for scsi media changer devices. Signed-off-by:
-
brking@us.ibm.com authored
Currently, during PCI hotplug remove, if the upper layer drivers of the attached devices send commands down as part of the remove action, like a CDROM, the hotplug action will hang forever due to the ipr driver returning SCSI_MLQUEUE_HOST_BUSY. Patch fixes this. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker found that this for loop was wrong. This patch changes it to what seems to be intended. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Kai Makisara authored
This patch is against 2.6.12-rc3 + linus-patch from April 30. The patch contains the following fixes: - CAP_SYS_RAWIO is used instead of CAP_SYS_ADMIN; fix from Alan Cox - only direct sending of SCSI commands requires this permission - the st status is modified is successful unload is performed using SCSI_IOCTL_STOP_UNIT Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
brking@us.ibm.com authored
Bump driver version Signed-off-by:
-
brking@us.ibm.com authored
Bugme 4547. The following patch fixes a bug in ipr's error logging. Signed-off-by:
-
Jeremy Higdon authored
I discovered that the qla1280 driver does not send the correct status to the midlayer when it gets Queue Full or Busy from a device. Signed-off-by:
Jeremy Higdon <jeremy@sgi.com> Signed-off-by:
-
Moore, Eric Dean authored
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles for mptspi/mptfc in the message frame. And I'm now not seeing the panic. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
James Bottomley authored
Signed-off-by: -
Al Viro authored
Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Mark Haverkamp authored
This patch addresses the sparse -Wbitwise warnings that Christoph wanted me to eliminate. This mostly consisted of making data structure elements of hardware associated structures the __le* equivalent. Although there were a couple places where there was mixing of cpu and le variable math. These changes have been tested on both an x86 and ppc machine running bonnie++. The usage of the LE32_ALL_ONES macro has been eliminated. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Benoit Boissinot authored
This patch fixes the following warnings: drivers/scsi/dpt_i2o.c: In function ‘adpt_isr’: drivers/scsi/dpt_i2o.c:2030: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2031: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2042: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2043: warning: passing argument 2 of ‘writel’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2046: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2048: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2055: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2062: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2069: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c: In function ‘adpt_i2o_to_scsi’: drivers/scsi/dpt_i2o.c:2239: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2243: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2248: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2259: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast It define variables which are only used with a type of 'void __iomem *' with this type instead of the incorrect 'unsigned long' type. It also remove pointless casts. Signed-off-by:
Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by:
-
Benoit Boissinot authored
This patch removes the array 'hbas' as it seems to be useless and redundant with the linked list hbas_chain. Signed-off-by:
-
Adrian Bunk authored
This patch makes some needlessly global functions static. Signed-off-by:
-
James Bottomley authored
From: Adrian Bunk <bunk@stusta.de> This patch contains cleanups including the following: - remove #ifdef'ed code for other OS's - remove other unused code - make needlessly global code static Signed-off-by:
-
Adrian Bunk authored
This patch makes a needlessly global struct static. Signed-off-by:
-
Adrian Bunk authored
This patch makes a needlessly global function static. Signed-off-by:
-
Tejun Heo authored
scsi_queue_insert() used to use blk_insert_request() for requeueing requests. This depends on the unobvious behavior of blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when requeueing. This patch makes scsi_queue_insert() use blk_requeue_request(). As REQ_SPECIAL means special requests and REQ_SOFTBARRIER is automatically handled by blk layer now, no flag needs to be set. Note that scsi_queue_insert() now calls scsi_run_queue() itself, and the prototype of the function is added right above scsi_queue_insert(). This is temporary, as later requeue path consolidation patchset removes scsi_queue_insert(). By adding temporary prototype, we can do away with unnecessarily moving functions. Signed-off-by:
-
Tejun Heo authored
scsi_requeue_request() used to use blk_insert_request() for requeueing requests. This depends on the unobvious behavior of blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when requeueing. This patch makes scsi_queue_insert() use blk_requeue_request(). As REQ_SPECIAL means special requests and REQ_SOFTBARRIER is automatically handled by blk layer now, no flag needs to be set. Signed-off-by:
-
Tejun Heo authored
blk_insert_request() has a unobivous feature of requeuing a request setting REQ_SPECIAL|REQ_SOFTBARRIER. SCSI midlayer was the only user and as previous patches removed the usage, remove the feature from blk_insert_request(). Only special requests should be queued with blk_insert_request(). All requeueing should go through blk_requeue_request(). Signed-off-by:
-
Tejun Heo authored
scsi_init_io() used to set REQ_SPECIAL when it fails sg allocation before requeueing the request by returning BLKPREP_DEFER. REQ_SPECIAL is being updated to mean special requests. So, remove REQ_SPECIAL setting. Signed-off-by:
-
Tejun Heo authored
This is the reworked version of the patch. It sets REQ_SOFTBARRIER in two places - in elv_next_request() on BLKPREP_DEFER and in blk_requeue_request(). Signed-off-by:
-
Andrew Vasquez authored
Original from: Christoph Hellwig <hch@lst.de> Modified and Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
James Bottomley authored
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to get the upper makefile to descend into the fusion directory. Add this back as a variable and make the two upper level modules select it. Signed-off-by: -
Moore, Eric Dean authored
(1) mptfc.c: This driver is having module_init, module_exit, and probe. (2) mptfc.c: Registering for Fibre Channel pci ids are done from this module. (3) mptfc.c: Convert MODULE_PARM to module_param Signed-off-by:
-
Moore, Eric Dean authored
(1) mptspi.c: This driver is having module_init, module_exit, and probe. (2) mptspi.c: Registering for SCSI pci ids are done from this module. (3) mptspi.c: Convert MODULE_PARM to module_param Signed-off-by:
-
Moore, Eric Dean authored
(1) mptscsih.c: Remove credits, -sralston references , update copyright (2) mptscsih.c: split driver support (3) mptscsih.c: module_init, module_exit, and probe routines moved to new stub drivers, mptfc and mptspi (4) mptscsih.c: some global parameters are moved to MPT_SCSI_HOST (5) mptscsih.c: removed scsi_device_online check. Signed-off-by:
-
Moore, Eric Dean authored
(1) mptlan.c: Remove credits and update copyright (2) mptlan.c: Remove -sralston references Signed-off-by:
-
Moore, Eric Dean authored
(1) mptctl.c: Remove credits and update copyright (2) mptctl.c: cleanup in get_iocinfo Signed-off-by:
-
Moore, Eric Dean authored
(1) mptbase.c: Move registering pci ids to scsi lld drivers (2) mptbase.c: Use the DMA_32BIT_MASK constant (3) mptbase.c: Fix for multiple pci domains (4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size (5) mptbase.c: Remove credits, -sralston references , update copyright (6) mptbase.c: split driver support Signed-off-by:
-
Moore, Eric Dean authored
(1) Kconfig - added new mptspi and mptfc scsi lld drivers (2) Kconfig - increased MAX_SGE from 40 to 128 (2) Makefile - compilation support for split drivers (3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others Signed-off-by:
-
James Bottomley authored
From: Christoph Hellwig <hch@lst.de> Both drivers are marked broken and haven't compiled since very early 2.5.x. And they're for IDE hardware so they shouldn't have been written to the SCSI layer at all. Signed-off-by: -
James Bottomley authored
Update SCSI firmware images: ql1040_fw.h: - * Firmware Version 7.65.00 (14:17 Jul 20, 1999) + * Firmware Version 7.65.06 (14:38 Jan 07, 2002) ql1280_fw.h: - * Firmware Version 8.15.00 (14:35 Aug 22, 2000) + * Firmware Version 8.15.11 (10:20 Jan 02, 2002) ql12160_fw.h: - * Firmware Version 10.04.32 (12:03 May 09, 2001) + * Firmware Version 10.04.42 (15:44 Apr 18, 2003) Signed-off-by:
-
- May 07, 2005
-
-
Linus Torvalds authored
-
