- Apr 24, 2022
-
-
Piotr Oniszczuk authored
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch adds RK3568 compatible in rockchip-vpu dt-bindings. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt Signed-off-by:
Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Piotr Oniszczuk authored
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch adds support for RK356x family in existing Hantro video decoder kernel driver. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt Signed-off-by:
-
Ming Qian authored
For interlaced frame, the amphion vpu will store the two fields sequential into one buffer, top-bottom order so the field should be set to V4L2_FIELD_SEQ_TB. fix the previous bug that set it to V4L2_FIELD_SEQ_BT wrongly. Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Wan Jiabing authored
use if and else instead of if(A) and if (!A). Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Ming Qian authored
Don't change the output buffer's bytesused set by user. Drop allow_zero_bytesused, since it's deprecated. This should also guarantee it's the application's responsibility to set bytesused for the output buffer. Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by:
-
Zheyu Ma authored
When removing the module, we will get the following warning: [ 14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]' [ 14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0 [ 14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0 [ 14.759589] Call Trace: [ 14.759792] <TASK> [ 14.759975] unregister_irq_proc+0x14c/0x170 [ 14.760340] irq_free_descs+0x94/0xe0 [ 14.760640] mp_unmap_irq+0xb6/0x100 [ 14.760937] acpi_unregister_gsi_ioapic+0x27/0x40 [ 14.761334] acpi_pci_irq_disable+0x1d3/0x320 [ 14.761688] pci_disable_device+0x1ad/0x380 [ 14.762027] ? _raw_spin_unlock_irqrestore+0x2d/0x60 [ 14.762442] ? cx25821_shutdown+0x20/0x9f0 [cx25821] [ 14.762848] cx25821_finidev+0x48/0xc0 [cx25821] [ 14.763242] pci_device_remove+0x92/0x240 Fix this by freeing the irq before call pci_disable_device(). Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Zheyu Ma authored
When the driver fails to call the dma_set_mask(), the driver will get the following splat: [ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50 This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask(). Signed-off-by:
-
Yan Lei authored
Declaring variable "tuner_status" without initializer. Using uninitialized value "tuner_status" when calling "*fe_tuner_ops->get_status". (The function pointer resolves to "cx24113_get_status".) Signed-off-by:
Yan Lei <yan_lei@dahuatech.com> Signed-off-by:
-
Kwang Son authored
RGB/YUV Input is sensor type and it should be sub-dev node. To generate this dot graph sudo modprobe vimc media-ctl --print-dot Signed-off-by:
Kwang Son <dev.kwang.son@gmail.com> Signed-off-by:
-
Nicolas Dufresne authored
Add H264 level 1.0, 4.1, 4.2 to the list of supported formats. While the hardware does not fully support these levels, it does support most of them. The constraints on frame size and pixel formats already cover the limitation. This fixes negotiation of level on GStreamer 1.17.1. Cc: stable@vger.kernel.org Fixes: 42a68012 ("media: coda: add read-only h.264 decoder profile/level controls") Suggested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
-
Nicolas Dufresne authored
The CODA960 manual states that ASO/FMO features of baseline are not supported, so for this reason this driver should only report constrained baseline support. This fixes negotiation issue with constrained baseline content on GStreamer 1.17.1. ASO/FMO features are unsupported for the encoder and untested for the decoder because there is currently no userspace support. Neither GStreamer parsers nor FFMPEG parsers support ASO/FMO. Cc: stable@vger.kernel.org Fixes: 42a68012 ("media: coda: add read-only h.264 decoder profile/level controls") Signed-off-by:
Pascal Speck <kernel@iktek.de> Signed-off-by:
-
Ming Qian authored
The hardware is capable of encoding/decoding RGB and ARGB formats in whatever order the color components are, but the resulting jpegs look good if we start with raw data in BGR/ABGR order, so we will further only support V4L2_PIX_FMT_BGR24 and V4L2_PIX_FMT_ABGR32. Signed-off-by:
-
Ming Qian authored
Wait finishing jpeg job before system sleep, otherwise the encoding/decoding can't be resumed after suspend. Signed-off-by:
-
Philipp Zabel authored
Stop bailing out on JPEG header parsing errors during streamon. This allows userspace to provide valid output buffers later and fixes a v4l2-compliance streaming test failure: fail: v4l2-test-buffers.cpp(1429): node->streamon(q.g_type()) test MMAP (no poll): FAIL Signed-off-by:
-
Philipp Zabel authored
If JPEG header parsing fails, output a single message instead of two messages that say the same thing. Signed-off-by:
-
Philipp Zabel authored
If decoding fails because the output buffer does not contain a valid header, set the error flag on the returned capture buffer. Signed-off-by:
-
Philipp Zabel authored
The JPEG decoder in the CODA960 VPU can downscale images while decoding, with a factor of 1/2, 1/4, or 1/8. Signed-off-by:
-
Colin Ian King authored
The variable m is being assigned a value that is never read, it is being re-assigned in both paths of the following if-statement. The assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Philipp Zabel authored
If the decoder prepare_run callback returns an error, the hardware is never started and v4l2_m2m_job_finish() is called immediately, currently in every error path. Remove the duplicated job_finish calls from the error paths and reuse the v4l2_m2m_job_finish() at the end of coda_pic_run_work instead. Signed-off-by:
-
Philipp Zabel authored
coda_fill_bitstream() must be called under the bitstream mutex. Signed-off-by:
-
Philipp Zabel authored
Use v4l2_disable_ioctl() to disable the stateful encoder ioctls VIDIOC_ENUM_FRAMEINTERVALS, VIDIOC_G_PARM, and VIDIOC_S_PARM for the jpeg encoder device, to fix this v4l2-compliance test failure: fail: v4l2-test-formats.cpp(68): node->is_m2m && !(node->codec_mask & STATEFUL_ENCODER) test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL fail: v4l2-test-formats.cpp(1363): node->is_m2m && !is_stateful_enc test VIDIOC_G/S_PARM: FAIL Signed-off-by:
-
Philipp Zabel authored
Use v4l2_disable_ioctl() to disable the encoder ioctls VIDIOC_ENUM_FRAMESIZES, VIDIOC_ENUM_FRAMEINTERVALS, VIDIOC_G_PARM, and VIDIOC_S_PARM, to fix this v4l2-compliance test failure: fail: v4l2-test-formats.cpp(1363): node->is_m2m && !is_stateful_enc test VIDIOC_G/S_PARM: FAIL Signed-off-by:
-
Philipp Zabel authored
Use v4l2_disable_ioctl() to disable the VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls on decoder video devices and the VIDIOC_TRY_DECODER_CMD and VIDIOC_DECODER_CMD ioctls on encoder video devices. This allows to drop the coda_try_encoder/decoder_cmd() functions and to use v4l2_m2m_ioctl_try_encoder/decoder_cmd() directly. Signed-off-by:
-
Dikshita Agarwal authored
Add support for intra-refresh type v4l2 control. Signed-off-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Dikshita Agarwal authored
Add a control to set intra-refresh type. Signed-off-by:
-
Stanimir Varbanov authored
When recalculate output buffer size we have to take into account the output resolution from the firmware received during event change notification. Signed-off-by:
-
Stanimir Varbanov authored
This adds QC10C compressed pixel format in the Venus driver, and make it possible to discover from v4l2 clients. Note: The QC10C format will be enumerable via VIDIOC_ENUM_FMT when the bitstream is 10-bits and the headers are parsed. Signed-off-by:
-
Stanimir Varbanov authored
In multistream mode HFI supports TP10_UBWC on output2. Correct this in supported formats capabilities list. Signed-off-by:
-
Stanimir Varbanov authored
This adds QC08C compressed pixel format in the Venus driver, and make it possible to discover from v4l2 clients. Signed-off-by:
-
Stanimir Varbanov authored
Add a helper to check supported pixel format per codec and session type. Signed-off-by:
-
Stanimir Varbanov authored
Add custom Qualcomm raw compressed pixel formats. They are used in Qualcomm SoCs to optimize the interconnect bandwidth. Signed-off-by:
-
Vikash Garodia authored
Video decoder driver auto-suspends the hardware if there is no exchange of command or response for certain amount of time. In auto suspended state, it becomes mandatory to power on the hardware before requesting it to process a command. The fix ensures the hardware is powered on during stop streaming. Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
-
Vikash Garodia authored
During reconfig (DRC) event from firmware, it is not guaranteed that all the DPB(internal) buffers would be released by the firmware. Some buffers might be released gradually while processing frames from the new sequence. These buffers now stay idle in the dpblist. In subsequent call to queue the DPBs to firmware, these idle buffers should not be queued. The fix identifies those buffers and free them. Signed-off-by:
Fritz Koenig <frkoenig@chromium.org> Signed-off-by:
-
Luca Weiss authored
If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Luca Weiss authored
This error can appear with wrong configuration and is difficult to find as it just returns -ETIMEDOUT with no further message. Signed-off-by:
-
Philipp Zabel authored
Simplify the mux error path a bit by using dev_err_probe(). Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Kate Hsuan authored
An not calibrated x_start setting would result in an incorrect AWB grid configuration on a sensor when only the rightmost stripe is used. If the AWB grid coordinate is set to the rightmost stripe, for example, x_start is greater than 640, the AWB grid will be at the rightmost edge of the sensor. The AWB statistic will be fetched from the wrong place of the sensor and results in an incorrect AWB estimation result. Therefore, stripe offset should subtract from x_start to have a correct grid configuration for the rightmost stripe. Signed-off-by:
Kate Hsuan <hpa@redhat.com> Signed-off-by:
-
Ian Jamison authored
The documentation comment was inserted between the return type and the function name. Reunite the lines. Signed-off-by:
Ian Jamison <ian.dev@arkver.com> Fixes: db7ee32a ("[media] media-device.h: Improve documentation and update it") Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Masahiro Yamada authored
Commit b3b7a9f1 ("[media] media-device: Use u64 ints for pointers") added this #include <stdint.h>, presumably in order to use uintptr_t. Now that it is gone, we can compile this for userspace without <stdint.h>. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
-
Uwe Kleine-König authored
The only effect of returning an error code in an i2c remove callback is that the i2c core emits a generic warning and still removes the device. So even if disabling the regulator fails it's sensible to further cleanup and then return zero to only emit a single error message. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
